
SAFETY DATA SHEET
Super Gluematic
0158401c 3.00 IE EA 09.11.1999 MSDS_IE
Loctite Corporation
Environmental Health & Safety Affairs
Health & Regulatory Affairs - Europe
MSDS_IE
Page 1 of 4
This safety data sheet has been prepared in accordance with the requirements of EC Directive
88/379/EEC and 91/155/EEC (and other related directives) and provides information relating to the
safe handling and use of the product.
1.
PRODUCT AND COMPANY INFORMATION
Product Code
Trade Name
Manufacturer/Supplier
Address
0158401c
Super Gluematic
Loctite UK
Watchmead,
Welwyn Garden City,
Herts., AL7IJB.
01 707 358800
Phone Number
Fax Number
Emergency Phone Number
01 707 358900
+353-1-4599301/+353-1-87-2629625/+353-1-4046444
2.
COMPOSITION / INFORMATION ON INGREDIENTS
Nature
Hazardous Components in Product for EC
Component Name
Ethyl Cyanoacrylate
Cyanoacrylate adhesive.
Concentration
60.00 - 95.00
R Phrases
R36/37/38
Classification
Xi
3.
HAZARD IDENTIFICATION
Irritating to eyes, respiratory system and skin. Bonds skin and eyes in seconds. Highly reactive to
water. (See Section 4 on first aid).
4.
FIRST AID MEASURES
First Aid - Inhalation
Remove affected person to fresh air, and if still feeling unwell seek medical attention.
First Aid - Skin
Do not pull bonded skin apart. It may be gently peeled apart using a blunt object such as a spoon,
preferably after soaking in warm soapy water. Cyanoacrylates give off heat on solidification. In rare
cases a large drop will generate enough heat to cause a burn. Burns should be treated normally
after the adhesive has been removed from the skin.
If lips are accidentally stuck together apply warm water to the lips and encourage maximum wetting
and pressure from saliva inside the mouth. Peel or roll lips apart. Do not try to pull the lips apart
with direct opposing action.
First Aid - Eyes
If the eye is bonded closed, release eyelashes with warm water by covering with wet pad.
Cyanoacrylate will bond to eye protein causing lachrymatory effect which will help to debond
adhesive. Keep eye covered until debonding is complete, usually within 1-3 days. Do not force eye
open. Medical advice should be sought in case solid particles of cyanoacrylate trapped behind the
eyelid cause any abrasive damage.
First Aid - Ingestion
Ensure that breathing passages are not obstructed. The product will polymerise immediately in the
mouth making it almost impossible to swallow. Saliva will slowly separate the solidified product
from the mouth (several hours).
5.
FIRE FIGHTING MEASURES
Non flammable product (flash point is greater than 80°C (CC)). If product is involved in fire
extinguish with dry powder, foam or carbon dioxide. Trace amounts of toxic fumes may be released