- 您現在的位置：買賣IC網 > PDF目錄373913 > AD7676 (Analog Devices, Inc.) 16-Bit +-1 LSB INL, 500 kSPS, Differential ADC PDF資料下載
參數資料
| 型號： | AD7676 |
| 廠商： | Analog Devices, Inc. |
| 英文描述： | 16-Bit +-1 LSB INL, 500 kSPS, Differential ADC |
| 中文描述： | 16位-1 LSB INL和500 kSPS的，差分ADC |
| 文件頁數： | 5/20頁 |
| 文件大小： | 321K |
| 代理商： | AD7676 |
REV. 0
AD7676
–
5
–
PIN FUNCTION DESCRIPTIONS
Pin No.
Mnemonic
Type
Description
1
2
3, 6, 7,
40–42,
44–48
4
AGND
AVDD
NC
P
P
Analog Power Ground Pin
Input Analog Power Pins. Nominally 5 V.
No Connect
BYTESWAP
DI
Parallel Mode Selection (8/16 Bit). When LOW, the LSB is output on D[7:0]and the MSB
is output on D[15:8]. When HIGH, the LSB is output on D[15:8] and the MSB is output
on D[7:0].
Straight Binary/Binary Two’s Complement. When OB/
2C
is HIGH, the digital output is
straight binary; when LOW, the MSB is inverted resulting in a two’s complement output
from its internal shift register.
Serial/Parallel Selection Input. When LOW, the parallel port is selected; when HIGH, the
serial interface mode is selected and some bits of the DATA bus are used as a serial port.
Bit 0 and Bit 1 of the Parallel Port Data Output Bus. When SER/
PAR
is HIGH, these outputs
are in high impedance.
When SER/
PAR
is LOW, these outputs are used as Bit 2 and Bit 3 of the Parallel Port Data
Output Bus.
When SER/
PAR
is HIGH, EXT/
INT
is LOW and RDC/SDIN is LOW, which is the
serial master read-after-convert mode. These inputs, part of the serial port, are used to slow
down, if desired, the internal serial clock which clocks the data output. In the other serial
modes, these inputs are not used.
When SER/
PAR
is LOW, this output is used as the Bit 4 of the Parallel Port Data Output Bus.
When SER/
PAR
is HIGH, this input, part of the serial port, is used as a digital select input
for choosing the internal or an external data clock. With EXT/
INT
tied LOW, the internal
clock is selected on SCLK output. With EXT/
INT
set to a logic HIGH, output data is
synchronized to an external clock signal connected to the SCLK input.
When SER/
PAR
is LOW, this output is used as the Bit 5 of the Parallel Port Data Output Bus.
When SER/
PAR
is HIGH, this input, part of the serial port, is used to select the active state
of the SYNC signal. When LOW, SYNC is active HIGH. When HIGH, SYNC is active LOW.
When SER/
PAR
is LOW, this output is used as the Bit 6 of the Parallel Port Data Output Bus.
When SER/
PAR
is HIGH, this input, part of the serial port, is used to invert the SCLK
signal.
It is active in both master and slave mode.
When SER/
PAR
is LOW, this output is used as the Bit 7 of the Parallel Port Data Output Bus.
When SER/
PAR
is HIGH, this input, part of the serial port, is used as either an external
data input or a read mode selection input depending on the state of EXT/
INT
.
When EXT/
INT
is HIGH, RDC/SDIN could be used as a data input to daisychain the
conversion results from two or more ADCs onto a single SDOUT line. The digital data
level on SDIN is output on DATA with a delay of 16 SCLK periods after the initiation of
the read sequence. When EXT/
INT
is LOW, RDC/SDIN is used to select the read mode.
When RDC/SDIN is HIGH, the data is output on SDOUT during conversion. When
RDC/SDIN is LOW, the data isoutput on SDOUT only when the conversion is complete.
Input/Output Interface Digital Power Ground
Input/Output Interface Digital Power. Nominally at the same supply than the supply of the
host interface (5 V or 3 V).
Digital Power. Nominally at 5 V.
Digital Power Ground
5
OB/
2C
DI
8
SER/
PAR
DI
9, 10
DATA[0:1]
DO
11, 12
DATA[2:3] or
DI/O
DIVSCLK[0:1]
13
DATA[4]
or EXT/
INT
DI/O
14
DATA[5]
or INVSYNC
DI/O
15
DATA[6]
or INVSCLK
DI/O
16
DATA[7]
or RDC/SDIN
DI/O
17
18
OGND
OVDD
P
P
19
20
DVDD
DGND
P
P
相關PDF資料 |
PDF描述 |
|---|---|
| AD7676AST | 16-Bit +-1 LSB INL, 500 kSPS, Differential ADC |
| AD7676ASTRL | 16-Bit +-1 LSB INL, 500 kSPS, Differential ADC |
| AD7677 | 16-Bit, 1 LSB INL, 1 MSPS Differential ADC |
| AD7677AST | 16-Bit, 1 LSB INL, 1 MSPS Differential ADC |
| AD7677ASTRL | 16-Bit, 1 LSB INL, 1 MSPS Differential ADC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7676ACP | 制造商:Analog Devices 功能描述:ADC SGL SAR 500KSPS 16BIT PARALLEL/SERL 48LFCSP - Trays |
| AD7676ACPRL | 制造商:Analog Devices 功能描述:ADC Single SAR 500ksps 16-bit Parallel/Serial 48-Pin LFCSP EP T/R |
| AD7676ACPZ | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD7676ACPZRL | 制造商:Analog Devices 功能描述:ADC Single SAR 500ksps 16-bit Parallel/Serial 48-Pin LFCSP EP T/R 制造商:Analog Devices 功能描述:ADC SGL SAR 500KSPS 16BIT PARALLEL/SERL 48LFCSP - Tape and Reel |
| AD7676AST | 制造商:Analog Devices 功能描述:ADC Single SAR 500ksps 16-bit Parallel/Serial 48-Pin LQFP 制造商:Analog Devices 功能描述:IC 16-BIT ADC |
發布緊急采購，3分鐘左右您將得到回復。