- 您現在的位置：買賣IC網 > PDF目錄380047 > CPMC-TNC-13 (Electronic Theatre Controls, Inc.) TNC Straight Crimp Type Plug - Solder or Crimp Contact - 3 Piece PDF資料下載
參數資料
| 型號： | CPMC-TNC-13 |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | TNC Straight Crimp Type Plug - Solder or Crimp Contact - 3 Piece |
| 中文描述： | 跨國公司直壓式插頭-焊接或壓接觸點- 3件 |
| 文件頁數： | 1/2頁 |
| 文件大小： | 123K |
| 代理商： | CPMC-TNC-13 |
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Solder or Crimp Contact - 3 Piece
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 1-800-24
3
-8814 Fax: 507-833-6287 www.cambridgeproducts.com
PART NUMBER CABLE TYPE
CPMC-TNC-13
“A”
“B”
CONTACT I.D.
.044 (1.12)
BODY I.D.
.126 (3.20)
FERRULE I.D.
.220 (5.59)
RG-142, 223, 400, 55
.520 (13.20)
.595 (15.11)
1.Identify connector parts. (3 piece parts - except bulkheads)
2.Strip cable to dimensions shown. Do not nick braid or center
conductor. Tin center conductor if contact will be solder attached.
Do not tin center conductor if contact is to be crimp attached. A
wire stripper of correct size is recommended for this step. Slide
heat shrink (as applicable) and crimp sleeve onto jacket of cable.
3.Assemble contact onto cable as shown.
Solder Attachment:
Solder contact to center conductor through
hole using a minimum amount of solder for a good joint.
Crimp Attachment (where applicable):
Crimp contact to cen-
ter conductor using recommended crimp hex.
4.Flare braid and slide body assembly over contact and under braid.
Then seat body assembly firmly onto contact. The cable may
have to be held in a clamping fixture. Arrange braid uniformly
around crimp stem. Slide crimp sleeve forward and crimp using
recommended crimp hex. Slide heat shrink forward and shrink
(as applicable).
Strip Dimensions
“A”
.315 (8.00)
Crimp
Contact
Crimp Hex
.060 (1.52)
Recommended
Crimp Tool
24-304P
Part Number
CPMC-TNC-13
Cable
RG-55, 142
“B”
.118 (3.00)
“C” Sleeve Hex
.157 (4.00)
.213 (5.41)
相關PDF資料 |
PDF描述 |
|---|---|
| CPS140 | 1 Amp Schottky Rectifier |
| CPT-230 | Surface Mountable Chip Photo-transistor CPT-230 Series |
| CPT-DINAV61HR2AX | Energy Management Compact Power Transducer |
| CPT-DINAV63HA3AX | Energy Management Compact Power Transducer |
| CPT-DINAV63HDBAX | Energy Management Compact Power Transducer |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CPMCTNC-13 | 功能描述:CONN TNC PLUG SOLDER OR CRIMP RoHS:是 類別:連接器，互連式 >> 同軸，RF 系列:TNC RoHS指令信息:5221221-2 Statement of Compliance 3D 型號:5221221-2.pdf 標準包裝:1,000 系列:BNC 連接器類型:BNC 連接器類型:插孔，母插口 觸點終端:雙壓接 阻抗:75 歐姆 安裝類型:面板安裝，隔墻式（前端螺母） 緊固型:插銷鎖 纜線組:RG-59，59A，59B 頻率 - 最大:2GHz 特點:- 顏色:- 包裝:散裝 |
| CPMCTNC16 | 制造商:Emerson Connectivity Solutions 功能描述:Conn TNC PL 0Hz to 11GHz 50Ohm Crimp ST Cable Mount Gold 制造商:EMERSON NETWORK POWER 功能描述:Conn TNC PL 0Hz to 11GHz 50Ohm Crimp ST Cable Mount Gold |
| CPMC-TNC-16 | 功能描述:RF 連接器 3PC RG450 PLUG RoHS:否 制造商:Bomar Interconnect 產品:Connectors 射頻系列:BNC 型式:Jack (Female) 極性: 觸點電鍍:Gold 阻抗: 端接類型:Solder 主體類型:Straight Bulkhead 電纜類型: |
| CPMCTNC17 | 功能描述:CONN TNC PLUG SOLDER OR CRIMP RoHS:是 類別:連接器，互連式 >> 同軸，RF 系列:TNC RoHS指令信息:1058014-1 Statement of Compliance 標準包裝:100 系列:BNC 連接器類型:BNC 連接器類型:插孔，母插口 觸點終端:焊杯 阻抗:50 歐姆 安裝類型:面板安裝，方形法蘭 緊固型:插銷鎖 纜線組:- 頻率 - 最大:4GHz 特點:- 顏色:- 包裝:散裝 |
| CPMC-TNC-17 | 功能描述:RF 連接器 3PC RG-8X PLUG RoHS:否 制造商:Bomar Interconnect 產品:Connectors 射頻系列:BNC 型式:Jack (Female) 極性: 觸點電鍍:Gold 阻抗: 端接類型:Solder 主體類型:Straight Bulkhead 電纜類型: |
發布緊急采購，3分鐘左右您將得到回復。