- 您現在的位置：買賣IC網 > PDF目錄380050 > CPU001-BB (Electronic Theatre Controls, Inc.) CPU001-BB PDF資料下載
參數資料
| 型號： | CPU001-BB |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | CPU001-BB |
| 中文描述： | CPU001 - BB網站 |
| 文件頁數： | 1/5頁 |
| 文件大?。?/td> | 86K |
| 代理商： | CPU001-BB |
CPU Module
March 1999
GFK-1536C
1
Product Information _________________________________
Revision:
Firmware version:
Compatibility:
CPU001-BB
1.10
VersaPro software version 1.0
New Features ____________________________________
This version of CPU001 provides:
Support for intelligent I/O modules.
Scaling function blocks.
Two new function blocks can be used to scale input data.
One function block is for unipolar (unsigned) input data. The other
function block is for bipolar (signed) input data.
Drum Sequencer function block.
This new function block works like a mechanical drum sequencer.
It allows a sequence of output combinations to be selected in turn.
See the heading “The Drum Sequencer Function” for more
information.
Specifications
Size
I/O Discrete Points
I/O Analog Words
Registers
Discrete Internal Bits
Discrete Temporary Bits
Global Discrete Bits
Program Memory
2.63” (66.8mm) x 5.04” (128mm)
2048 In, 2048 Out
128 In, 128 Out
2048 words
1024 points
256 points
1280 points
12288 bytes
Boolean execution speed
Floating Point
Override
1.8ms/K (typical)
Yes
Yes
Built-in ports
RS-232, RS-485
Built-in communications
SNP Slave, RTU Slave, Serial I/O
Type of memory storage
System flash, battery-backed RAM
Battery-Backed Real-time Clock
Yes
Realtime clock accuracy (used
for timers or timer contacts)
100ppm (0.01%) or +/- 9sec/day
Time-of-day clock accuracy
23ppm(.0023%)or +/- 2sec/day @ 30C;
100 ppm((0.01%) or +/- 9sec/day @ full
temperature range.
Preinstallation Check _____________________________
Carefully inspect all shipping containers for damage. If any equipment
is damaged, notify the delivery service immediately. Save the damaged
shipping container for inspection by the delivery service. After
unpacking the equipment, record all serial numbers. Save the shipping
containers and packing material in case it is necessary to transport or
ship any part of the system.
Module Installation _________________________________
133.35mm
(5.25in)
66.80mm
(2.63in)
3
1
2
Modules must be mounted on a
horizontal DIN rail.
1.
Allow sufficient finger clearance
for opening CPU door.
2.
Allow adequate clearance for
serial port cables.
3.
Allow adequate space for power
wiring.
The CPU with power supply attached
fits into a 70mm deep enclosure.
Rated thermal specifications for the
CPU module is based on a clearance
of 2” above and below the equipment
and 1” to the left of the CPU module.
Installing the CPU on the DIN Rail
The CPU and connecting carriers must be
installed on the same section of 35mm x
7.5mm DIN rail. The rail must have a
conductive (unpainted) finish for proper
grounding. For best stability, the DIN rail
should be installed on a panel using
screws spaced approximately 6 inches
(5.24cm) apart.
The CPU snaps easily onto the DIN rail.
No tools are required for mounting or
grounding to the DIN rail.
Before joining module carriers to the CPU, remove the connector cover on
the righthand side of the CPU. Do not discard this cover, you will need to
install it on the last carrier, to protect the connector pins from contamination
and damage during use.
Panel-Mounting __________________________________
If excessive vibration is a factor the CPU should also be screwed down to
the mounting panel.
Note 1. Tolerances are +/- 0.13mm (0.005in) non-cumulative.
Note 2. 1.1-1.4Nm (10-12 in/lbs) of torque should be applied to M3.5 (#6-
32) steel screw threaded into material containing internal threads
and having a minimum thickness of 2.4mm (0.093in).
SEE NOTE 2.
M3.5 (#6) SCREW
15.9mm
0.62in REF
SPLIWASHER
FLAT WASHER
CPU
TAPPED
HOLE IN
PANEL
5.1mm
0.200in
4.3mm
0.170in
4.3mm
0.170in
Removing the CPU from the DIN Rail ___________________
1.
2.
Turn off power to the power supply.
(If the CPU is attached to the panel with a screw) remove the power
supply module. Remove the panel-mount screw.
Slide the CPU away from the other modules until the connector on the
right side disengages from the next carrier.
With a small flathead screwdriver, pull the DIN rail latch outward while
tilting the other end of the module down to disengage it from the DIN
rail.
3.
4.
相關PDF資料 |
PDF描述 |
|---|---|
| CPU165MF | IGBT SIP MODULE Fast IGBT |
| CPU165MK | IGBT SIP MODULE Short Circuit Rated UltraFast IGBT |
| CPU165MM | IGBT SIP MODULE Short Circuit Rated Fast IGBT |
| CPV362M4U | UltraFast IGBT IGBT SIP MODULE |
| CPV362MF | IGBT SIP MODULE Fast IGBT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CPU010VCSN | 制造商:PROXISTOR AB ELECTRONIC 功能描述:SENSOR CAPACATIVE PROXIMITY PNP 制造商:PROXISTOR AB ELECTRONIC 功能描述:SENSOR, CAPACATIVE PROXIMITY, PNP |
| CPU010VCTN | 制造商:PROXISTOR AB ELECTRONIC 功能描述:SENSOR CAPACATIVE PROXIMITY PNP 制造商:TT Electronics / Proxistor 功能描述:SENSOR, CAPACATIVE PROXIMITY, PNP, Supply Voltage DC Min:8V, Supply Voltage DC M 制造商:AB Electronic 功能描述:M18 CAPACITIVE M12 |
| CPU020VDSN | 制造商:PROXISTOR AB ELECTRONIC 功能描述:SENSOR CAPACATIVE PROXIMITY PNP 制造商:PROXISTOR AB ELECTRONIC 功能描述:SENSOR, CAPACATIVE PROXIMITY, PNP; Supply Voltage DC Min:8V; Supply Voltage DC Max:30V; SVHC:No SVHC (19-Dec-2012); Body Length:80.5mm; Frequency Response Max:25Hz; IP / NEMA Rating:IP67; Lead Length:3m; Material:PBT; Mounting ;RoHS Compliant: Yes |
| CPU020VDTN | 制造商:PROXISTOR AB ELECTRONIC 功能描述:SENSOR CAPACATIVE PROXIMITY PNP 制造商:PROXISTOR AB ELECTRONIC 功能描述:SENSOR, CAPACATIVE PROXIMITY, PNP |
| CPU100J | 制造商:Cornell Dubilier Electronics 功能描述: 制造商:Mallory Sonalert Products Inc 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。