
MOS INTEGRATED CIRCUIT
μ
PD78P9014
8-bit Single-Chip Microcontroller
The information in this document is subject to change without notice.
μ
PD78P9014 is a product in the
μ
PD789014 Subseries of compact, general-purpose microcontrollers in the 78K/
0S Series.
In addition to an 8-bit CPU, this product has substantial hardware such as on-chip I/O ports, timers, serial interface,
and interrupt controls.
This PROM product incorporates one-time PROM that can be written only once.
Since user can write programs, this microcontroller is best suited for evaluation during development, multi-product
small-volume production, and rapid start up.
These user’s manuals contain detailed descriptions of the functions. Be sure to read them before
designing.
μ
PD78P9014 Subseries User’s Manual: U11187E
78K/0S Series User’s Manual - Instruction: U11047E
FEATURES
Pin compatible with mask ROM products (except for the V
PP
pin)
On-chip one-time PROM: 8K bytes
On-chip high-speed RAM: 256 bytes
Can change the minimum instruction execution time to the fast speed (0.4
μ
s) and the low speed (1.6
μ
s)
I/O ports: 22
Serial interface: 1 channel
Can select the three-wire serial I/O mode or the UART mode
Timers: 3 channels
8-bit timer/event counter: 2 channels
Watchdog timer: 1 channel
Operation possible at the same power supply voltage as in mask ROM products (V
DD
= 1.8 to 5.5 V)
Compatible with the QTOP
TM
microcontroller
Remarks
QTOP microcontroller is the name of the on-chip one-time PROM microcontroller fully supported by the
NEC write service (sealing from the write, screening, inspection).
APPLICATION FIELDS
Compact household appliances, remote controls, games, etc.
ORDERING INFORMATION
Part Number
Package
μ
PD78P9014CT
28-pin plastic shrink DIP (400 mils)
μ
PD78P9014GT
28-pin plastic SOP (375 mils)
Document No. U10912EJ1V0DS00 (1st edition)
Date Published October 1997 N
Printed in Japan
1995
DATA SHEET
The mark
shows major revised points.