參數資料
| 型號： | 07010 |
| 廠商： | Desco |
| 文件頁數： | 1/4頁 |
| 文件大小： | 0K |
| 描述： | CALIBRATION UNIT NIST STD WS&FG |
| 標準包裝： | 1 |
| 類型： | 校準單元 |
| 使用： | 校準鞋具、腕帶設備 |
| 特點： | NIST 可追溯，無源設備，無需電源 |
| 包括： | 測試引線 |
DESCO WEST
- 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Website: Desco.com
TB-2039
Page 1 of 4
2012 DESCO INDUSTRIES, INC.
Employee Owned
Made in the
United States of America
Calibration Unit for Testers
Installation, Operation and Maintenance
Description
The Desco 07010 Calibration Unit is designed to verify
whether a tester is operating within specifications.
This product can be used as one of the tools to fulfill
the ANSI/ESD S20.20 paragraph 6.1.3.2 “Compliance
Verification Plan.” The 07010 Calibration Unit is a
passive device and requires no power source. The
Calibration Unit is manufactured with industry accepted
test ranges for both wrist straps and foot grounders.
The wrist strap pass range is set at 750K - 10M, while
the foot ground test range is set at 750K - 100M. The
Desco Calibration Unit is calibrated to NIST traceable
standards.
The Desco 07010 Calibration Unit is to be used with the
following items:
July 2012
Figure 1. Desco 07010 Calibration Unit
Packaging
1 Calibration Unit
2 Test Leads with Banana Plug Terminals
1 Certificate of Calibration
Operation
WRIST STRAP TESTER
1. Plug one of the included test leads into the black banana
jack labeled “E” on the Calibration Unit. Connect the
opposite end of the test lead into the yellow banana jack
located on the 19240 Wrist Strap Tester.
TECHNICAL BULLETIN TB-2039
Item
Description
19240 Wrist Strap Tester
19250 Combo Wrist Strap / Footwear Tester
19252 Combo Wrist Strap / Footwear Tester with
Stand
19253 Combo Wrist Strap / Footwear Tester with
Foot Plate
Wrist Strap Touch Tester, 120VAC
Wrist Strap Touch Tester, 220VAC
Figure 2. Connecting the test lead from banana jack “E”
on the Calibration Unit to the banana jack on the Wrist
Strap Tester
2. Connect the second test lead to the red 675K banana jack
labeled “A” on the Calibration Unit. Touch the opposite
end of the test lead to test plate on the Wrist Strap Tester
and press down to activate the test. Be sure not to touch
the banana plug or test plate with your skin.
3. Observe the response from the Wrist Strap Tester. The
alarm should sound, and the LOW LED should illuminate
red.
4. Repeat the procedure for test points B (825K), C (8.5M)
and D (11.5M). The expected test results can be found in
the following table.
Test
Point
Resistance
Value
Test Output
A
675K
FAIL LOW
B
825K
PASS
C
8.5M
PASS
D
11.5M
FAIL HIGH
相關PDF資料 |
PDF描述 |
|---|---|
| 07200 | CHAIR COVER STATSHIELD |
| 07420 | BINDER 3RING DISSIPATIVE 3" |
| 07450 | SHEET PROT'R CLR 8.75X11.25 25PK |
| 07452 | SHOP TRAV EXTRA PCKT 10X12" 25PK |
| 07470 | SHEET PROTECTOR ESD 8.5X11" 25PK |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 0701008 | 制造商:Phoenix Contact 功能描述:URKN-A |
| 0701011 | 功能描述:DIN導軌式接線端子 URKN RoHS:否 制造商:Phoenix Contact 類型:Feed Through Modular Terminal Block 位置/觸點數量:1 線規量程:26-14 電流額定值:5 A, 15 A 電壓額定值:300 V, 600 V 安裝風格: 端接類型:Push-In |
| 07-010-171HT | 功能描述:多配對電纜 FLAT PIN STAKED FLEX FEMALE TIN ENDS RoHS:否 制造商:Belden Wire & Cable 線規 - 美國線規（AWG）:18 對數:1 絞合:16 x 30 屏蔽:Shielded 長度:1000 ft 電壓額定值:300 V 外殼材料:Polyvinyl Chloride (PVC) 絕緣材料:Polyethylene (PE) 類型:Audio, Control and Instrumentation 外殼顏色:Chrome |
| 0701024 | 功能描述:DIN導軌式接線端子 URKN/S RoHS:否 制造商:Phoenix Contact 類型:Feed Through Modular Terminal Block 位置/觸點數量:1 線規量程:26-14 電流額定值:5 A, 15 A 電壓額定值:300 V, 600 V 安裝風格: 端接類型:Push-In |
| 0701032LN | 制造商:Micro Plastics Inc 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。