
302
The world's first 0.8mm (.031") pitch wire-
to-board insulation displacement
connector. Side entry type is only 3.9mm
(.154") depth and 1.75mm (.069") height
after mounting on the PC board, and top
entry type is only 2.2mm (.087") depth and
3.9mm (.154") height.
Compared to the conventional 1.0mm
(.039") pitch SSR connector, occupation
space on the board is reduced by 34%
(side entry type).
Features ––––––––––––––––––––––––
3-point grip construction
The 3-point insulation grip feature and the strain relief ensure a
firm grip on terminated wires and protection of the insulation
displacement connection from possible damage.
Super fine wires are applicable
Applicable wire is of AWG #32 with only 0.38mm (.015") O.D.
With this super fine wire, routing of wires is easy.
Shrouded header
The header is fully shrouded, but remains thin.
Twin U-slot insulation displacement section
The insulation displacement section connected to each wire
consists of two tin-plated slots (twin U-slots), which ensures
reliable connection.
Specifications –––––––––––––––––––
Current rating:
0.5A AC, DC (AWG #32)
0.2A AC, DC (AWG #36)
Voltage rating:
30V DC
Temperature range: -25C to +85C(including temperature rise
in applying electrical current)
Contact resistance: Initial value/20m
max.
After environmental testing/40m
max.
Insulation resistance:
100M
min.
Withstanding voltage:
200V AC/minute
Applicable wire: AWG #32, #36
Conductor/7 strands,
tin-coated copper alloy
Insulation O.D./0.39mm (.015")
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1CertifiedLR20812
SUR CONNECTOR
Disconnectable Insulation displacement connectors
0.8mm
(.031") pitch
IDC
Emboss Tape