
13
.
18
Han
Q
Han Q 17
Features
o 17 contact chambers taking the control contacts
of the series Han D (10 A)
o Space-saving and compact design
o Leading protective ground
o Crimp terminal with standard Han D contacts
o Use of standard tools
o Insert is suitable for the hoods and housings
of the series Han-Compact
o The contacts can be removed with the aid of a
removal tool from the mating side
Current carrying capacity
The current carrying capacity is limited by maximum temperature
of materials for inserts and contacts including terminals. The
current capacity-curve is valid for continuous, not interrupted
current-loaded contacts of connectors when simultaneous power
on all contacts is given, without exceeding the maximum termpe-
rature.
Control and test procedures according to DIN IEC 60 512-3.
W
o
rking
current
(A)
Ambient temperature (C°)
Wire gauge:
0.5 mm2
1.0 mm2
1.5 mm2
Technical characteristics
Specifications
DINEN61 984
DIN VDE 0110
Inserts
Number of contacts
17 + PE
Electrical data
acc. to DIN EN 61 984
10 A
250 V
4 kV
2
Working current
Working voltage
Testing voltage
Pollution degree
Insulation resistance
≥ 1010
Material
Polycarbonate
Temperature range
– 40 OC … + 125 OC
Flammability acc. to UL 94
V 0
Mechanical working life
- mating cycles
≥ 500
Contacts
Material
Copper alloy
Surface
- hard-silver plated
3 m Ag
- hard-gold plated
2 m Au over 3 m Ni
Contact resistance
Crimp terminal
< 3 m
- mm
0.14 - 2.5 mm
- AWG
26 - 14
Plastic hoods/housings
Material
Polycarbonate RAL 9005
Locking element
Polyamide
Flammability acc. to UL 94
V 0
Hood/Housings seal
NBR
Temperature range
– 40 OC … + 125 OC
Degree of protection
acc. to DIN EN 40 050
in locked position
IP 65
Cable gland
Pg 16, M 25
Metal hoods/housings
Material
die cast zinc alloy
Locking element
V2A steel
Hoods/Housings seal
NBR
Temperature range
– 40 OC … + 125 OC
Degree of protection
acc. to DIN EN 60 529
in locked position
IP 65
Accessories
Crimping tools
chapter 99