
DRAWING
NUMBER
09837
DATE:
December
2010
HUB, MULTI GROUNDING
2010 DESCO INDUSTRIES INC.
Employee Owned
ITEM
DESCRIPTION
Multi-Ground Hub
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
Desco.com PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
Made in America
A
B
C
D
G
F
E
H
A. Brass machined hex block with 6 banana jacks
(.162" - .164" ± .002" ID) and 6 screw terminals for #10 ring terminals.
B. 6’ long, high flex strand copper, 20 gauge, with PVC insulated jacket.
Green/yellow wire terminated with a .200” I.D. #10 ring terminal.
C. Six 10-32 x 1/4” round screws.
D. Six #10 split washers.
E. 10-32 x 1-3/4” socket head screw.
F. 10-32 hex nut.
G. One #10 split washer.
H. Banana plug (not included). Shown for
application only.
Mounting the 09837 to a table top.
Mounting the 09837 to a table leg.
COMMON POINT GROUND
Per ANSI/EOS/ESD S6.1, Grounding paragraph 4.1.1 “Every
element to be grounded at an ESD protected station shall be
connected to the same common point ground.”
ESD Handbook TR 20.20 paragraph 5.1.3 Basic Grounding
Requirements “The first step in ensuring that everything in
an EPA is at the same electrical potential is to ground all
conductive components of the work area (worksurfaces, people,
equipment, etc.) to the same electrical ground point. This point
is called the common point ground. The next step in completing
the ground circuit is to connect the common point ground to the
equipment ground (third wire, green).”
Specifications and procedures subject to change without notice.