- 您現在的位置：買賣IC網 > PDF目錄62912 > 1115-206 Analog IC PDF資料下載
參數資料
| 型號： | 1115-206 |
| 英文描述： | Analog IC |
| 中文描述： | 模擬IC |
| 文件頁數： | 1/1頁 |
| 文件大小： | 77K |
| 代理商： | 1115-206 |
Extractor Tool
Instruction Sheet
Order No. 11-03-0043
(HT60923A)
The Micro-Fit 3.0 Extraction Tool is a simple hand tool used to remove a Micro-Fit terminal (P.N. 43030 or 43031)
from a Micro-Fit housing (P.N. 43025 or 43020).
OPERATION:
1. Insert the tip of the tool down side "A" or "B", on the mating end of the plug or receptacle, to the stop.
(See Fig. 1)
2. Rotate tool clockwise then counter-
clockwise approximately 25 to 30 in each direction, once or twice. (See Fig. 2)
3. Repeat steps 1 and 2 on opposite side of terminal.
4. Pull on the wire and remove the terminal from the housing.
NOTE: When a terminal is removed in this manner the locking tangs are damaged and the terminal is not
reusable.
MOLEX TOOLING GROUP
1150 East Diehl Road
Naperville, IL 60563
(630) 969-4550FAX: (630) 505-0049
Doc. No. 11-03-0043
R elease Date: 95/02/02
UNCONTROLLED COPY
Revision: B
Revision Date: 99/01/05
CONNECTOR PATTERN
Fig. 1
ROTATING TOOL
Fig. 2
相關PDF資料 |
PDF描述 |
|---|---|
| 1115-212 | Analog IC |
| 1120-105 | Analog IC |
| 1120-106 | Analog IC |
| 1120-112 | Analog IC |
| 1120-124 | Analog IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 111520602 | 制造商:Amphenol PCD 功能描述:MODULE - Bulk |
| 111520702 | 制造商:Amphenol PCD 功能描述:MODULE - Bulk |
| 111521102 | 制造商:Amphenol PCD 功能描述:MODULE - Bulk |
| 1115-212 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
| 11-1521-78K | 制造商:3M Electronic Products Division 功能描述:PANEL; |
發布緊急采購，3分鐘左右您將得到回復。