
AVR SERIES
Output Voltages -- 100Vdc up to 1000Vdc at 1 Watt
Miniature, Isolated, and Regulated
The Series AVR High Voltage DC-DC Converters is intended for users needing a miniature, isolated, regulated voltage source. These 1 Watt
single output units offer high regulation along with low ripple and stability. AVR Units are protected against input Overvoltage, Output
Overcurrent and Over Temperature. With no minimum load required, units can be safely operated from No Load to Full Load. Encapsulated
in a miniature case and potted, units will operate over a temperature range of -25C to +70C with no heatsink or power derating.
These units are suitable for applications like electron beam deflection or focussing, photomultiplier tubes, piezo transducers or any other
applications requiring regulated, isolated high-voltage sources.
FEATURES:
Input/Output Isolation to 1500V
Output Regulation
Low Ripple
4 standard input voltages: 5, 12, 24, 28 Vdc
Input Over Voltage Protection
Output Over Current and Short Circuit Protection
Remote Shutdown
TYPICAL CHARACTERISTICS:
Input Voltage Ranges
5 ± 10%Vdc
12 ± 10%Vdc
24 ± 10%Vdc
28 ± 10%Vdc
Input Voltage Shutdown: Vin, nom +25% (typical)
Output Voltage Tolerance: ± 0.25% Vout
Output Current Limit: Iout, max. +30% (typical)
Output Power: 1 Watt maximum
Internal Over Temperature Shutdown: 95C
Line Regulation: 0.1% Vout
Page 1 of 6
Pico Electronics Inc. DC-DC Converters AVR Series
12/17/2007
http://www.picoelectronics.com/dcdc/peAVR.htm?PartNo=5AVR100