- 您現在的位置：買賣IC網 > PDF目錄106296 > 12IMR6-1515-2 2-OUTPUT 6 W DC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | 12IMR6-1515-2 |
| 元件分類： | 電源模塊 |
| 英文描述： | 2-OUTPUT 6 W DC-DC REG PWR SUPPLY MODULE |
| 文件頁數： | 5/6頁 |
| 文件大小： | 171K |
| 代理商： | 12IMR6-1515-2 |
Board Mountable
DC-DC Converters
IMR 6 Series
Edition 5/5.2000
5/6
Safety and Installation Instructions
Installation Instruction
Installation of the DC-DC converters must strictly follow the
national safety regulations in compliance with the enclo-
sure, mounting, creepage, clearance, casualty, markings
and segregation requirements of the end-use application.
Connection to the system shall be made via a printed circuit
board according to:
Mechanical Data.
The units should be connected to a secondary circuit.
Check for hazardous voltages before altering any connec-
tions.
Ensure that a unit failure (e.g. by an internal short-circuit)
does not result in a hazardous condition. See also:
Safety
of operator accessible output circuit.
Standards and approvals
The units have been evaluated for:
Building in
Operational insulation input to output
The use in a pollution degree 2 environment
Connecting the input to a secondary circuit which is sub-
ject to a maximum transient rating of 1500 V.
Isolation
The electric strength test is performed as factory test in ac-
cordance with IEC/EN 60950 and UL 1950 and should not
be repeated in the field. Power-One will not honour any
guarantee claims resulting from electric strength field tests.
Input Fuse
To prevent excessive current flowing through the input sup-
ply line in case of a short-circuit across the converter input
an external fuse should be installed in a non earthed input
supply line. We recommend a fast acting fuse F3.15A for
12 IMR 6 types, F1.6A for 24 IMR 6, F0.8A for 40 IMR 6 and
48 IMR 6 types.
Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids is to be prevented, since the power supplies
are not hermetically sealed.
Protection Degree
The protection degree of the DC-DC converters is IP 40.
Table 7: Electric strength test voltages, clearance and
creepage distances
Characteristic
Input to output
Unit
Electric strength
350
Vrms
test voltage 1 s
500
V DC
Coupling capacitance
≈320
pF
Isulation resistance
>1000
M
at 500 V DC
相關PDF資料 |
PDF描述 |
|---|---|
| 110IMX7-05-05-9L | 2-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE |
| 110IMX7-05-9Z | 1-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE |
| 110IMX7-12-12-9Z | 2-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE |
| 110IMY15-12-12-9I | 2-OUTPUT 16.8 W DC-DC REG PWR SUPPLY MODULE |
| 110IMY15-15-15-9R | 2-OUTPUT 16.8 W DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 12IMR6-15-2 | 制造商:POWER-ONE 制造商全稱:Power-One 功能描述:3...15 Watt DC-DC Converter |
| 12INBLACK | 制造商: 功能描述: 制造商:undefined 功能描述: |
| 12J100CT | 制造商:undefined 功能描述: |
| 12J13836 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| 12-J20 | 功能描述:TERM BLOCK SCREWS 1180 OR 1610 RoHS:是 類別:過電壓，電流，溫度裝置 >> 配件 系列:- 標準包裝:1 系列:- 附件類型:基座 適用于相關產品:- 其它名稱:UAK-BE/L6 |
發布緊急采購，3分鐘左右您將得到回復。