參數資料
| 型號： | 14244 |
| 廠商： | Desco |
| 文件頁數： | 7/8頁 |
| 文件大小： | 0K |
| 描述： | GND MICASTAT FLUSH MT INSERT |
| 標準包裝： | 1 |
| 附件類型： | 接地點 |
| 適用于相關產品： | 靜電耗散薄片 |
TB-2091 Page 7 of 8
4. Connect the other lead to the meter. Connect the other
end to the other weighted electrode.
5. Place the electrodes in position A as shown in RTT test
diagram (Fig. 13). Set the meter selector switch to 100V.
6. Push the On/Off button, for the 15 second electrification
period and then record the reading in ohms.
7. Release the On/Off button. Move the electrode to each
of the other three positions on the surface and repeat the
test.
8. Average results of the four readings to obtain an average
measurement of the resistance of the surface between
two points.
Maintenance
1. It is important to store Micastat
laminate sheets at the
same relative humidity as the material to which it will be
bonded. This will prevent a moisture imbalance in
application.
2. Micastat
may swell slightly if a damp object is kept in
continuous contact with the surface for more than 12
hours. This is normal; the swelling will disappear soon
after the damp object is removed.
3. Micastat
may be cleaned with Reztore Antistatic
Surface and Mat Cleaner, Item No. 10435 or any
household soap solution. Be careful that household
soaps are silicone free and do not leave an insulative
layer behind. This will reduce electrical properties.
Difficult stains may be removed with organic solvents
such as acetone, alcohol, methyl ethyl ketone (MEK) or
paint thinner.
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Fax (909) 627-7449
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Fax (781) 575-0172 Web Site: http://www.desco.com
Limited Warranty
Desco expressly warrants that for a period of one (1) year from
the date of purchase, Desco Micastat
Static Protective
Laminate will be free of defects in material. Within the warranty
period, the material will be tested, repaired, or replaced at
Desco’s option, free of charge. Call Customer Service at 909-
627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for
Return Material Authorization (RMA) and proper shipping
instructions and address. Include a copy of your original
packing slip, invoice, or other proof of date of purchase. Any
material under warranty should be shipped prepaid to the
Desco factory. Warranty replacements will take approximately
two weeks.
If your material is out of warranty, Desco will quote repair
charges necessary to bring your unit up to factory standards.
Call Customer Service at 909-627-8178 (Chino, CA) or 781-
821-8370 (Canton, MA) for Return Material Authorization
(RMA) and proper shipping instructions and address.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED
AND IMPLIED, INCLUDING MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE WHICH ARE
SPECIFICALLY DISCLAIMED. The express warranty will not
apply to defects or damage due to accidents, neglect, misuse,
alterations, operator error, or failure to properly maintain, clean
or repair products.
Limit of Liability
In no event will Desco or any seller be responsible or liable for
any injury, loss or damage, direct or consequential, arising out
of the use of or the inability to use the product. Before using,
users shall determine the suitability of the product for their
intended use, and users assume all risk and liability
whatsoever in connection therewith.
2009 DESCO INDUSTRIES, INC.
Employee Owned
RoHS Compliance Statement
None of the following materials are intentionally added in
manufacturing this product: lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in the Directive 2002/95/EC
Article 4.1. See Desco Industries Inc. letter on-line at Desco.com.
“It should be understood that any object, item, material or person
could be a source of static electricity in the work environment.
Removal of unnecessary nonconductors, replacing nonconductive
materials with dissipative or conductive materials and grounding all
conductors are the principle methods of controlling static electricity in
the workplace, regardless of the activity.” [ESD Handbook TR 20.20
section 2.4]
相關PDF資料 |
PDF描述 |
|---|---|
| OSTHE032040 | CONN TERM BLOCK 3POS 5.08MM |
| OSTVA030160 | TERM BLOCK PLUG 5.0MM 3POS |
| OSTHM037081 | CONN TERM BLOCK 3POS 5MM |
| OSTT7022151 | TERM BLOCK RISING CLAMP 2POS |
| OSTEK022150 | CONN TERM BLOCK 2POS 5.08MM |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 1424-4 | 功能描述:電路板硬件 - PCB PIN RoHS:否 制造商:Harwin 類型:Shield Clip 長度:9.4 mm 螺紋大小: 外徑: 材料:Beryllium Copper 電鍍:Tin |
| 1424400 | 功能描述:PROTECTIVE COVER SZD25 SGL LOCK 制造商:phoenix contact 系列:* 零件狀態:在售 標準包裝:1 |
| 1424401 | 功能描述:PROTECTIVE COVER SZD25 SGL LOCK 制造商:phoenix contact 系列:* 零件狀態:在售 標準包裝:1 |
| 1424402 | 功能描述:SLEEVE HOUSING SZD50 DBL LOCK LA 制造商:phoenix contact 系列:* 零件狀態:在售 標準包裝:1 |
| 1424403 | 功能描述:SLEEVE HOUSING SZD50 DBL LOCK LA 制造商:phoenix contact 系列:* 零件狀態:在售 標準包裝:1 |
發布緊急采購，3分鐘左右您將得到回復。