- 您現在的位置：買賣IC網 > PDF目錄68785 > 146P201.32.FAR UNIVERSAL JOINT PDF資料下載
參數資料
| 型號： | 146P201.32.FAR |
| 英文描述： | UNIVERSAL JOINT |
| 中文描述： | 萬向節 |
| 文件頁數： | 12/16頁 |
| 文件大?。?/td> | 260K |
| 代理商： | 146P201.32.FAR |
2
STEEL UNIVERSAL JOINTS
type HS, plain bearings – 1500 rpm max
type HE
An economy series, similar to type HS but manufactured to a
lesser specification which omits the grinding, honing and heat
treatment operations. In consequence type HE is suitable only
for low speed transmissions and is intended for manual
operation or intermittent motorised applications.
also available
The range also includes:
Joints with quick-release collars
Joints with needle roller bearings
Ball joints
Any of these executions can be supplied as telescopic drive
shafts. Please contact Technical Sales for further information.
Telescopic drive shaft
with conventional joints.
Telescopic drive shaft
with ball joints.
Single ball joint.
Single joint fitted with needle
roller bearings.
The journals are machined
integral with the central block.
This series conforms to DIN 808 (alternative to DIN 7551) and
features conventional construction comprising 1 long and 2
short journals with mutual location within the hardened centre
block. Large bearings of equal diameter are machined into the
fork ends which are subsequently induction hardened and
honed to render a precision fit. A grinding operation on the
inner faces of the forks corrects any distortion to ensure
concentricity of bores.
The joints are suitable for all mechanical engineering
applications where the maximum speed of rotation does not
exceed 1500 rpm.
Fax: +44 (0)1992 509890
9
lubrication
Regular lubrication at intervals consistent with the duty cycle is
recommended in the interests of extending the life of the joint.
The joints should be adequately lubricated and the use of
rubber gaiters loaded with grease is recommended. They
protect against dust, damp and foreign matter and by ensuring
permanent lubrication of the sliding surfaces, maintain optimum
efficiency over a longer service life.
The gaiters are moulded in a special mix of synthetic rubber
which permits their use in temperatures from –20°C to 100°C.
They are resistant to oils, greases, many chemical agents, sea
water and tropical climates.
The joints are suitable for use in machine tools, textile
machines, agricultural equipment, multi-spindle drilling and
tapping machines and mechanical engineering applications
generally where the maximum speed of rotation does not
exceed 1200 rpm.
相關PDF資料 |
PDF描述 |
|---|---|
| 146P251.35.FAR | UNIVERSAL JOINT |
| 146P321.42.FAR | UNIVERSAL JOINT |
| 146P401.48.FAR | UNIVERSAL JOINT |
| 146P501.52.FAR | UNIVERSAL JOINT |
| 146P631.58.FAR | UNIVERSAL JOINT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 146P251.35.FAR | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:UNIVERSAL JOINT |
| 146P321.42.FAR | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:UNIVERSAL JOINT |
| 146P401.48.FAR | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:UNIVERSAL JOINT |
| 146P501.52.FAR | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:UNIVERSAL JOINT |
| 146P631.58.FAR | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:UNIVERSAL JOINT |
發布緊急采購，3分鐘左右您將得到回復。