參數資料
| 型號： | 19240 |
| 廠商： | Desco |
| 文件頁數： | 1/2頁 |
| 文件大小： | 0K |
| 描述： | WRISTSTRAP TESTER 9V OPERATION |
| 產品目錄繪圖： | 19240 |
| 標準包裝： | 1 |
| 類型： | 測試儀，腕帶 |
| 使用： | 驗證腕帶接地 |
| 特點： | NIST 可追溯，可壁式安裝 |
| 電源類型： | 9V 電池 |
| 包括： | 電池 |
| 其它名稱： | 16-1089 |
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Website: Desco.com
TB-3017 Page 1 of 2
2012 DESCO INDUSTRIES, INC.
Employee Owned
Made in the
United States of America
Wrist Strap Tester
Installation, Operation and Maintenance
Description
Per ANSI/ESD S20.20, test equipment is required to enact
the Compliance Verification Plan Requirement. Test
equipment shall be selected to make measurements of
appropriate properties of the technical requirements that are
incorporated into the ESD program plan. The Wrist Strap
Tester can be used to fulfill ANSI/ESD S1.1, “The wrist strap
system should be tested daily to ensure proper electrical
value” (Annex A3). Being a portable battery powered tool,
it is perfect for small labs or for a supervisor to spotcheck
workers and/or ensure compliance.
The Wrist Strap Tester is a battery operated “on demand”
wrist strap tester. When the wearer of a wrist strap plugs
in their coil cord and touches the metallic surface of the
Wrist Strap Tester, a path for current flow is completed from
the wearer’s skin, through the wrist strap. This action will
cause the green “test good” LED to illuminate as long as the
resistance of the circuit path is between 750 kilohms and 10
megohms.
Packaging
1 Wrist Strap Tester
1 9V Alkaline Battery
1 Hook and Loop Fastener Strip
1 Certificate of Calibration
September 2012
Figure 1. Desco 19240 Wrist Strap Tester
Installation
Open the Wrist Strap Tester’s battery compartment and
install the included 9V battery. Use the included hook
and loop fastener strip to mount the tester to a wall or
worksurface.
NOTE: The low battery indicator flashes briefly every time
the unit is used. Replace the battery once the indicator
becomes constant during testing.
Operation
1. Fit the wristband snugly onto your wrist.
2. Snap the wrist cord to the wristband.
3. Plug the wrist cord into the Wrist Strap Tester.
4. Push and hold the test button until the test results are
displayed.
5. An audible alarm will sound if the test fails. Verify
that your wrist strap is being worn correctly or needs
to be replaced. If your test result fails high, try applying
an approved dissipative hand lotion such as Menda
Reztore ESD Hand Lotion to your wrist.
TECHNICAL BULLETIN TB-3017
Figure 2. Using the Wrist Strap Tester and recording
results
相關PDF資料 |
PDF描述 |
|---|---|
| 19245 | TESTER LOW RESISTANCE |
| 19253 | TESTER COMBO WS&FS W/ PLATE |
| 19276 | TESTER X3 COMBO PROG W/DL PLATE |
| 19350 | TESTER W/S 2 STATE TOUCH NIST |
| 19430 | STATIC LOCATOR DIGITAL |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 19240 CAL | 制造商:Desco Industries Inc 功能描述:CALIBRATED - Wrist Strap Tester; Meter Display Type:LED; Features:Portable small package, Ran |
| 19240 CAL DU | 制造商:Desco Industries Inc 功能描述:CALIBRATED W/ DATA & UNCERTAINTIES - Wrist Strap Tester; Meter Display Type:LED; Features:Portable small package, Ran |
| 19240-01M | 制造商:Cooper Bussmann 功能描述:Circuit Breaker Thermal 1Pole 40A 12VDC |
| 1924004 | 功能描述:可插拔接線端子 MSTB 2.5 HC/ 5-GF RoHS:否 制造商:Phoenix Contact 產品:Plugs 系列:PTS 端接類型:Spring Cage 位置/觸點數量:5 線規量程:26-14 節距:5 mm 電流額定值:10 A 電壓額定值:250 V 安裝風格: 安裝角: 觸點電鍍: |
| 1924017 | 功能描述:可插拔接線端子 MSTB 2.5 HC/ 6-GF RoHS:否 制造商:Phoenix Contact 產品:Plugs 系列:PTS 端接類型:Spring Cage 位置/觸點數量:5 線規量程:26-14 節距:5 mm 電流額定值:10 A 電壓額定值:250 V 安裝風格: 安裝角: 觸點電鍍: |
發布緊急采購，3分鐘左右您將得到回復。