
Document Number: 42024
Revision 13-Nov-03
www.vishay.com
70
Type 192P Pacer
Vishay Sprague
For technical questions, contact spresale@vishay.com
Polyester Film/Foil Capacitors
Sleeved, Miniature, Axial Lead
FEATURES
Axial lead, designed for automatic insertion
Non-inductively wound, extended foil construction
Lead wire has metal end cap for connection to extended
foil
Moisture resistant
Encased in an orange heat shrinkable polyolefin sleeve
Available tape and reeled to EIA specifications for
automatic insertion
PERFORMANCE CHARACTERISTICS
Operating Temperature:
- 55
°
C to + 85
°
C.
Capacitance Range:
0.0001
μ
F to 0.39
μ
F.
Capacitance Tolerance:
±
20%,
±
10%,
±
5%.
Other tolerances available upon request.
DC Voltage Rating:
80 WVDC to 600 WVDC.
Voltage Derating:
At + 105
°
C: 70% of + 85
°
C rating.
At + 125
°
C: 50% of + 85
°
C rating.
Dissipation Factor:
1.0% maximum.
Voltage Test:
200% of rated voltage for 1 minute.
Insulation Resistance:
At + 25
°
C: 100,000 Megohm minimum.
At + 85
°
C: 15,000 Megohm minimum.
At + 105
°
C: 2000 Megohm minimum.
At + 125
°
C: 200 Megohm minimum.
PHYSICAL CHARACTERISTICS
Lead Pull:
5 pounds (2.3 kilograms) for 1 minute.
No physical damage.
Lead Bend:
After three complete consecutive bends,
no damage.
Marking:
Sprague
trademark, Type 192P, voltage,
capacitance, tolerance and date code.
ENVIRONMENTAL CHARACTERISTICS
DC Life Test:
150% of rated voltage for 250 hours @ + 85
°
C.
No open or short circuits. No visible damage.
Maximum
CAP
±
10%, maximum.
Minimum
IR 50% of initial limit, minimum.
Maximum
DF 1.0%.
Humidity Test:
95% relative humidity @ + 40
°
C for 500
hours. No visible damage.
Minimum IR = 50% of initial limit.
DIMENSIONS
in inches [millimeters]
DISSIPATION
CAPACITANCE CHANGE
- 55 -40 -25 0 + 25 + 50 + 75 + 85 + 105 + 125
- 50 + 100
TEMPERATURE DEG. CENTIGRADE
1.5
1.0
.5
0
P
16
14
12
10
8
6
4
2
0
2
4
6
- 55 -40 -25 0 + 25 + 50 + 75 + 85 + 105 + 125
- 50 + 100
P
C
TEMPERATURE DEG. CENTIGRADE
1.250
[31.750]
Min.
L
Max.
1.250
[31.750]
Min.
.032" [0.813] diameter (No. 20 AWG) copper-clad steel leads
except that .025" [.635] diameter (No. 22 AWG) leads will be
supplied on .153" [3.886] and .185" [4.699] diameter units.
D
Max.