- 您現在的位置：買賣IC網 > PDF目錄90954 > 1N5236BD2A (SEMELAB LTD) 7.5 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE PDF資料下載
參數資料
| 型號： | 1N5236BD2A |
| 廠商： | SEMELAB LTD |
| 元件分類： | 齊納二極管 |
| 英文描述： | 7.5 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE |
| 封裝： | HERMETIC SEALED, CERAMIC, DLCC2 VARIANT A, 2 PIN |
| 文件頁數： | 4/4頁 |
| 文件大小： | 187K |
| 代理商： | 1N5236BD2A |
500mW ZENER DIODES
1N5221BD2A TO 1N5261BD2A
Semelab
Semelab Limited
Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Document Number 9024
Telephone +44 (0) 1455 556565
Fax +44 (0) 1455 552612
Issue 2
Email: sales@semelab-tt.com
Website: http://www.semelab-tt.com
Page 4 of 4
SCREENING OPTIONS
Space Level (JQRS/ESA) and High Reliability options are
available in accordance with the High Reliability and
Screening Options Handbook available for download from
the from the TT electronics Semelab web site.
ESA Quality Level Products are based on the testing
procedures specified in the generic ESCC 5000 and in the
corresponding part detail specifications.
Semelabs QR216 and QR217 processing specifications
(JQRS), in conjunction with the companies ISO 9001:2000
approval present a viable alternative to the American MIL-
PRF-19500 space level processing.
QR217 (Space Level Quality Conformance) is based on the
quality conformance inspection requirements of MIL-PRF-
19500 groups A (table V), B (table VIa), C (table VII) and
also ESA / ESCC 5000 (chart F4) lot validation tests.
QR216 (Space Level Screening) is based on the screening
requirements of MIL-PRF-19500 (table IV) and also ESA
/ESCC 5000 (chart F3).
JQRS parts are processed to the device data sheet and
screened to QR216 with conformance testing to Q217
groups A and B in accordance with MIL-STD-750 methods
and procedures.
Additional conformance options are available, for example
Pre-Cap Visual Inspection, Buy-Off Visit or Data Packs.
These are chargeable and must be specified at the order
stage
(See
Ordering
Information).
Minimum
order
quantities may apply.
Alternative or additional customer specific conformance or
screening requirements would be considered. Contact
Semelab sales with enquires.
MARKING DETAILS
Parts can be laser marked with approximately 7 characters
on two lines and always includes cathode identification.
Typical marking would include part or specification number,
week of seal or serial number subject to available space and
legibility.
Customer specific marking requirements can be arranged at
the time of order.
Example Marking:
ORDERING INFORMATION
Part numbers are built up from Type, Package Variant, and
screening level. The part numbers are extended to include
the additional options as shown below.
Type – See Electrical Characteristics Table
Package Variant – See Mechanical Data
Screening Level – See Screening Options (ESA / JQRS)
Additional Options:
Customer Pre-Cap Visual Inspection
.CVP
Customer Buy-Off visit
.CVB
Data Pack
.DA
Solderability Samples
.SS
Scanning Electron Microscopy
.SEM
Radiography (X-ray)
.XRAY
Total Dose Radiation Test
.RAD
MIL-PRF-19500 (QR217)
Group B charge
.GRPB
Group B destructive mechanical samples
.GBDM (12 pieces)
Group C charge
.GRPC
Group C destructive electrical samples
.GCDE (12 pieces)
Group C destructive mechanical samples
.GCDM (6 pieces)
ESA/ESCC
Lot Validation Testing (subgroup 1) charge
.LVT1
LVT1 destructive samples (environmental)
.L1DE (15 pieces)
LVT1 destructive samples (mechanical)
.L1DM (15 pieces)
Lot Validation Testing (subgroup 2) charge
.LVT2
LVT2 endurance samples (electrical)
.L2D (15 pieces)
Lot Validation Testing (subgroup 3) charge
.LVT3
LVT3 destructive samples (mechanical)
.L3D (5 pieces)
Additional Option Notes:
1) All ‘Additional Options’ are chargeable and must be specified at order stage.
2) When Group B,C or LVT is required, additional electrical and mechanical destructive
samples must be ordered
3) All destructive samples are marked the same as other production parts unless
otherwise requested.
Example ordering information:
The following example is for the 1N5245B part with
package variant A, JQRS screening, additional Group C
conformance testing and a Data pack.
Part Numbers:
1N5245BD2A-JQRS (Include quantity for flight parts)
1N5245BD2A.GRPC (chargeable conformance option)
1N5245BD2A.GCDE (charge for destructive parts)
1N5245BD2A.GCDM (charge for destructive parts)
1N5245BD2A.DA (charge for Data pack)
Customers with any specific requirements (e.g. marking or
screening) may be supplied with a similar alternative part
number (there is maximum 20 character limit to part
numbers).
Contact
Semelab
sales
with
enquiries.
High Reliability and Screening Options Handbook link: http://www.semelab.co.uk/pdf/misc/documents/hirel_and_screening_options.pdf
相關PDF資料 |
PDF描述 |
|---|---|
| 1N5236BD2B.GBDM | 7.5 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE |
| 1N5236BD2B.RAD | 7.5 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE |
| 1N5237BD2A-JQRS.GCDE | 8.2 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE |
| 1N5237BD2A-JQRS.GCDM | 8.2 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE |
| 1N5237BD2A-JQRS.GRPB | 8.2 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 1N5236BDO35 | 制造商:Microsemi Corporation 功能描述:DIODE ZENER 7.5V 500MW DO35 |
| 1N5236BDO35E3 | 功能描述:DIODE ZENER 7.5V 500MW DO-35 RoHS:是 類別:分離式半導體產品 >> 單二極管/齊納 系列:- 標準包裝:1 系列:- 電壓 - 齊納（標稱）(Vz):36V 電壓 - 在 If 時為正向 (Vf)（最大）:900mV @ 10mA 電流 - 在 Vr 時反向漏電:100nA @ 27V 容差:±5% 功率 - 最大:200mW 阻抗（最大）(Zzt):70 歐姆 安裝類型:表面貼裝 封裝/外殼:SC-70，SOT-323 供應商設備封裝:SOT-323 包裝:剪切帶 (CT) 工作溫度:-65°C ~ 150°C 產品目錄頁面:1585 (CN2011-ZH PDF) 其它名稱:MMBZ5258BWMMBZ5258BWCTMMBZ5258BWCT-NDMMBZ5258BWDICT |
| 1N5236BFV | 制造商:National Semiconductor 功能描述:5236 |
| 1N5236B-LCC3 | 制造商:SEME-LAB 制造商全稱:Seme LAB 功能描述:ZENER VOLTAGE REGULATOR DIODE IN HERMETIC CERAMIC SURFACE MOUNT PACKAGE FOR HIGH RELIABILITY APPLICATIONS |
| 1N5236-BP | 制造商:MCC 制造商全稱:Micro Commercial Components 功能描述:500 mW Zener Diode 2.4 to 75 Volts |
發布緊急采購，3分鐘左右您將得到回復。