- 您現在的位置：買賣IC網 > PDF目錄98310 > 1N6166 (MICROSEMI CORP) BIDIRECTIONAL TRANSIENT SUPPRESSORS PDF資料下載
參數資料
| 型號： | 1N6166 |
| 廠商： | MICROSEMI CORP |
| 元件分類： | TVS二極管 - 瞬態電壓抑制 |
| 英文描述： | BIDIRECTIONAL TRANSIENT SUPPRESSORS |
| 中文描述： | 1500 W, BIDIRECTIONAL, SILICON, TVS DIODE |
| 封裝： | HERMETIC SEALED, GLASS, G, 2 PIN |
| 文件頁數： | 1/4頁 |
| 文件大小： | 197K |
| 代理商： | 1N6166 |
Voidless-Hermetically-Sealed Bidirectional
Transient Suppressors
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
Copyright
2006
9-06-2006 REV C
WWW
.Microse
m
i
.CO
M
S C O T TS DALE DIVISION
1N6102 thru 1N6137A
and 1N6138 thru 1N6173A
1N6
102
–
1
N
6137
A
1N6
138
–
1
N
6173
A
DESCRIPTION
APPEARANCE
This series of industry recognized voidless-hermetically-sealed Bidirectional Transient
Voltage Suppressor (TVS) designs is military qualified to MIL-PRF-19500/516 and are
ideal for high-reliability applications where a failure cannot be tolerated. They provide
a Working Peak “Standoff” Voltage selection from 5.2 to 152 Volts with two package
sizes for 500 W and 1500 W ratings. They are very robust in hard-glass construction
and also use an internal metallurgical bond identified as Category I for high reliability
applications. Both of these are also military qualified to MIL-PRF-19500/516.
These
devices are available as both a non-suffix part and an “A” suffix part involving different
voltage tolerances as further described in note 4 on page 2. These devices are also
available in a surface mount MELF package configuration by adding a “US” suffix (see
separate data sheet for 1N6102US thru 1N6173AUS).
Microsemi also offers
numerous other TVS products to meet higher and lower peak pulse power and voltage
ratings in both through-hole and surface-mount packages.
“E” Package
“G” Package
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
High surge current and peak pulse power provides
transient voltage protection for sensitive circuits
Triple-layer passivation
Internal “Category I” metallurgical bonds
Voidless hermetically sealed glass package
JAN/TX/TXV military qualifications available per MIL-
PRF-19500/516 by adding JAN, JANTX, or JANTXV
prefix (consult factory for 1N6102 and 1N6138)
JANS available for 1N6103A thru 1N6118A per MIL-
PRF-19500/516 as well as further options for screening
in accordance with MIL-PRF-19500 for JANS on all
others in this series by using a “MSP” prefix, e.g.
MSP6119A, MSP6143A, etc.
Surface Mount equivalents are also available in a
square-end-cap MELF configuration with a “US” suffix
(see separate data sheet)
Military and other high reliability transient
protection
Extremely robust construction
Extensive range in Working Peak “Standoff”
Voltage (VWM) from 5.2 to 152 V
Available as either 500 W or 1500 W Peak Pulse
Power (PPP) using two different size packages
ESD and EFT protection per IEC6100-4-2 and
IEC61000-4-4 respectively
Secondary lightning protection per select levels
in IEC61000-4-5
Flexible axial-leaded mounting terminals
Nonsensitive to ESD per MIL-STD-750 Method
1020
Inherently radiation hard as described in
Microsemi MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
Operating & Storage Temperature: -55oC to +175oC
Peak Pulse Power at 25oC: 500 Watts for 1N6102 to
1N6137A and 1500 Watts for 1N6138 to 1N6173A @
10/1000 s (also see Figures 1,2 and 3)
Impulse repetition rate (duty factor): 0.01%
Steady-State Power: 3.0 W for 1N6102 to 1N6137A and
5.0 W for 1N6138 to 1N6173A @ TL = 75
oC @3/8 inch
lead length from body (see Figure 4)
Steady-State Power: 2.0 W for 1N6102 to 1N6137A and
3.0 W for 1N6138 to 1N6173A @ TA=25
oC (see note
below and Figure 5)
Thermal Resistance @ 3/8 inch lead length:
33.5
oC/W for 1N6102 to 1N6137A and 20.0 oC/W for
1N6138 thru 1N6173A
Solder Temperatures: 260oC for 10 s (maximum)
CASE: Hermetically sealed voidless hard glass
with Tungsten slugs
TERMINATIONS: Axial-leads are Tin/Lead
(Sn/Pb) over copper except for JANS with solid
Silver (Ag) and no finish
MARKING: Body painted and part number, etc.
POLARITY: No polarity marking for these
bidirectional TVSs
Tape & Reel option: Standard per EIA-296
Weight: 750 mg for 500 Watt (E Package)
1270 mg for 1500 Watt (G Package)
See package dimensions on last page for both
the “E” and “G” size packages
NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from
mounting point to ambient is sufficiently controlled where TOP or TJ(MAX) is not exceeded.
相關PDF資料 |
PDF描述 |
|---|---|
| 1N6167 | BIDIRECTIONAL TRANSIENT SUPPRESSORS |
| 1N6168 | BIDIRECTIONAL TRANSIENT SUPPRESSORS |
| 1N6169 | BIDIRECTIONAL TRANSIENT SUPPRESSORS |
| 1N6294 | TRANSIENT ABSORPTION ZENER |
| 1N4568-1 | Octal Buffer And Line/MOS Driver With 3-State Outputs 20-SOIC 0 to 70 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 1N6166A | 制造商:Microsemi Corporation 功能描述:TVS SGL BI-DIR 76V 1.5KW 2PIN G - Bulk |
| 1N6166AJANTX | 制造商:Microsemi Corporation 功能描述: |
| 1N6166AUS | 制造商:Microsemi Corporation 功能描述:TVS SGL BI-DIR 76V 1.5KW 2PIN MELF - Bulk |
| 1N6166JANTX | 制造商:Microwave Semiconductor 功能描述: |
| 1N6166US | 制造商:Microsemi Corporation 功能描述:TRANSIENT VOLTAGE SUPPRESSOR - Bulk |
發布緊急采購，3分鐘左右您將得到回復。