
Right angle panel
DIP switches
Features
Optimized Mechanical Features
Designed for panel applications
Saves cost of right angle socket
SPST, SPDT, DPST, DPDT, 3PST or 4PST circuitry choices
Standard 2.54mm .(100") x 2.54mm (.100") centers, uses
minimum PCB real estate
Standard or low profile actuators
Sealed version optional: assures contaminant-free switch
operation after flow soldering and cleaning
Optimized Contact System
Contact wiping on make and break
Integral terminal and contact locked into high
temperature plastic base
Electrostatic discharge shield rated to 22 KV
Materials
Gold plated contacts for long-term contact
corrosion resistance
All U.L. 94 V-O plastics used
Series 206 RA DIP
Powered by ICminer.com Electronic-Library Service CopyRight 2003
Electrical and Mechanical Specifications
Switch Function
Single pole single throw
Single pole double throw
Double pole single throw
Double pole double throw
3 pole single throw
4 pole single throw
Switch Contact Resistance
50 milliohms maximum initial
100 milliohms maximum after 10,000 cycles
switching 50 mA @ 24 VDC
Insulation Resistance
1,000 megohms minimum across open switch
1,000 megohms minimum between adjacent
closed switches
Dielectric Strength
500 VAC minimum for 1 minute between adjacent
switches
Nonswitching Rating
100 mA or 50 VDC
Switch Capacitance
5.0 pF maximum between adjacent switches
Operating Temperature
–55°C to +85°C
Actuation Life
10,000 cycles @ 50 mA @ 24 VDC
Allowable Solder Time
Up to 4 seconds with 260°C solder
Vibration
Per MIL-STD-202F, method 204D, condition B
(.06" or 15 G's between 10 HZ to 2K HZ)
with no contact inconsistencies greater than
1 microsecond
Shock
Per MIL-STD-202F, method 213B, condition A
(50 G’s) with no contact inconsistencies
greater than 1 microsecond
Sealing
Bottom epoxy seal optional
Top tape seal optional
Marking
Special side or top marking available-consult CTS
Technical Data Sheet 4206 RA