- 您現在的位置：買賣IC網 > PDF目錄368862 > 230.500 (Littelfuse, Inc.) Axial Lead and Cartridge Fuses - Subminiature Glass Body PDF資料下載
參數資料
| 型號： | 230.500 |
| 廠商： | Littelfuse, Inc. |
| 元件分類： | 保險絲 |
| 英文描述： | Axial Lead and Cartridge Fuses - Subminiature Glass Body |
| 中文描述： | 軸向引線和墨盒保險絲-微型玻璃體 |
| 文件頁數： | 1/2頁 |
| 文件大小： | 139K |
| 代理商： | 230.500 |
Subminiature Glass Body
Axial Lead and Cartridge Fuses
2AG
Slo-Blo
Fuse 229/230/290/291 Series
288
www.littelfuse.com
The 2AG Slo-Blo
fuses are available in cartridge form or with axial
leads. Axial leaded fuses are board washable. 2AG fuses provide the
same performance characteristics as their 3AG counterpart, while
occupying one-third the space. Sleeved fuses are available.
ELECTRICAL CHARACTERISTICS:
% of Ampere
Rating
110%
135%
Opening
Time
4 hours,
Min
imum
1 hour,
Max
imum
3 seconds,
Min
imum
20 seconds,
Max
imum
200%
AGENCY APPROVALS:
Listed by Underwriters Laboratories and
Certified by CSA through 3.5 amperes. Recognized under the
Components Program of Underwriters Laboratories from 4 through 7
amperes. 229 004 and 229 005 approved by MITI. 230 001 through 230
005 approved by METI.
AGENCY FILE NUMBERS:
UL E10480, CSA LR 29862.
FUSES TO MIL SPEC:
229 and 230 Series are available to DSCC
Drawing #87108.To order, change 229 to 290 or 230 to 291.
INTERRUPTING RATINGS:
0.25
–
3.5A
10,000 amperes at 125VAC
4
–
7A
400 amperes at 125VAC
0.25
–
1A
35 amperes at 250VAC
1.25
–
3.5A
100 amperes at 250VAC
OPTIONS:
230 Series available on tape and reel.
PACKAGING SPECIFICATIONS:
Tape and Reel per EIA-296; T1:
52.4mm (2.062") taped spacing; For 1,500 per reel, 10mm (.40") spac-
ing, add packaging suffix, DRT1. For 2,500 per reel, 5mm (.20") spacing,
add packaging suffix, ERT1.
ENVIRONMENTAL SPECIFICATIONS:
Operating Temperature:
–
55
°
C to 125
°
C.
Shock:
MIL-STD-202, Method 213, Test Condition I
(100 G
’
s peak for 6 milliseconds).
Vibration:
MIL-STD-202, Method 201 (10
–
55 Hz, 0.06 inches
total excursion).
Salt Spray:
MIL-STD-202 Method 101, Test Condition B (48 hours).
Insulation Resistance (After Opening): MIL-STD-202, Method 302,
Test Condition B.
Resistance to Soldering Heat:
(Axial Leaded Fuses):
MIL-STD-202, Method 210A, Test Condition B (260
°
C, 3 Seconds).
Thermal Shock:
MIL-STD-202, Method 107,
Test Condition B (
–
65
°
C to 125
°
C).
Moisture Resistance:
MIL-STD-202, Method 106
(90-98% RH, 65
°
C).
PEAK WITHSTAND CURRENT (lp):
These fuses will withstand 50
repetitions of a double exponential impulse wave having peak currents
(lp) and peak voltages as listed.
PHYSICAL SPECIFICATIONS:
Materials:
Glass Body, Nickel-Plated Brass Fuse Caps.
(Insulating sleeve option available).
Soldering parameters:
Wave solder
—
500
°
F (260
°
C), 3 seconds Max.
Reflow solder
—
Not recommended.
Solderability:
(Axial Leaded Fuses): MIL-STD-202,
Method 208.
PACKAGING SPECIFICATIONS:
Tape and Reel pitch per
EIA-296;T1:
52.4mm (2.062") taped spacing; For 1,500 per reel, add
packaging suffix, DRT1. For 2,500 per reel, 5mm (.20") add packaging
pitch suffix, ERT1. Insulating sleeve option available.
229
000
Series
230
000
Series
4.5
(.177")
14.48
(.57")
14.48
(.57")
4.5 (.177")
0.635
(.025")
38.1
(1.50") TYP.
Axial Lead Material: Solder coated copper.
The 2AG Indicating Slo-Blo
fuse instantly identifies itself upon
opening by showing a discoloration of its glass body. Guesswork
and time consuming circuit testing are eliminated.This unique
design offers the same quality performance characteristics as
the standard 2AG fuse design.
* When ordering the 2AG Indicating Slo-Blo Fuse, an
‘
S
’
is
required after the catalog number.
Example:
-1A Indicating Slo-Blo
Fuse = 230 001S
2AG
Indicating Slo-Blo
Type Fuse
NOTE: LF logo, series number, amperage rating, voltage rating, and UL and CSA logos are
stamped on the fuse caps.
MIL
UL
Next
Previous
相關PDF資料 |
PDF描述 |
|---|---|
| 2301.25 | Axial Lead and Cartridge Fuses - Subminiature Glass Body |
| 230.800 | Axial Lead and Cartridge Fuses - Subminiature Glass Body |
| 230001 | D-Subminiature Connector; Gender:Male; No. of Contacts:9; Contact Termination:Wire; D Sub Shell Size:DB9; Body Material:Thermoplastic; Leaded Process Compatible:No; Mounting Type:Low Profile Jackscrew RoHS Compliant: No |
| 230002 | D-Subminiature Connector; Gender:Male; No. of Contacts:9; Contact Termination:Solder; D Sub Shell Size:DB9; Body Material:Thermoplastic; Leaded Process Compatible:No; Peak Reflow Compatible (260 C):No RoHS Compliant: No |
| 230003 | MICRO 9 PIN SOD FLOAT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 2305000608 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Consumer IC |
| 230-5001-000 | 制造商:ITT Interconnect Solutions 功能描述:230-5001-000 / 230-5001-000 / D Sub 制造商:ITT 功能描述:230-5001-000 |
| 230500-1-10 | 制造商:DANAHER - INDUSTRIAL/SPECIALTY 功能描述:NO MOVING PART, THERMAL DISPERSION FLOW SWITCH |
| 230500-1-60 | 制造商:DANAHER - INDUSTRIAL/SPECIALTY 功能描述:FS-600 SERIES- NO MOVING PART, THERMAL DISPERSION FLOW SWITCH |
| 230500-3-10 | 制造商:DANAHER - INDUSTRIAL/SPECIALTY 功能描述:NO MOVING PART, THERMAL DISPERSION FLOW SWITCH |
發布緊急采購，3分鐘左右您將得到回復。