- 您現在的位置：買賣IC網 > PDF目錄357296 > 37-01/A7C-ARTC-AM (EVERLIGHT ELECTRONICS CO LTD) SINGLE COLOR LED, REDDISH ORANGE, 3.9 mm PDF資料下載
參數資料
| 型號： | 37-01/A7C-ARTC-AM |
| 廠商： | EVERLIGHT ELECTRONICS CO LTD |
| 元件分類： | LED |
| 英文描述： | SINGLE COLOR LED, REDDISH ORANGE, 3.9 mm |
| 封裝： | ROHS COMPLIANT, PLASTIC PACKAGE-4 |
| 文件頁數： | 7/9頁 |
| 文件大小： | 254K |
| 代理商： | 37-01/A7C-ARTC-AM |
Technical Data Sheet
Oval POWER LED
37-01/A7C-ARTC-AM
Notes
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 9
Device number:
DPE-0000046 Established date: 02-18-2009 Established by: Ken Lee
1.
Lead Forming
During lead formation, the leads should be bent at a point at least 3mm from the base of the
epoxy bulb.
Lead forming should be done before soldering.
Avoid stressing the LED package during leads forming. The stress to the base may damage
the LED’s characteristics or it may break the LEDs.
Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures
may cause failure of the LEDs.
When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead
position of the LED. If the LEDs are mounted with stress at the leads, it causes
deterioration of the epoxy resin and this will degrade the LEDs.
2.
Storage
The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from
Everlight and the storage life limits are 3 months. If the LEDs are stored for 3 months or
more, they can be stored for a year in a sealed container with a nitrogen atmosphere and
moisture absorbent material.
Please avoid rapid transitions in ambient temperature, especially, in high humidity
environments where condensation can occur.
3.
Soldering
Careful attention should be paid during soldering. Solder the LED no lower than 1.6mm
from the base of stopper is recommended.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Recommended soldering conditions:
Hand Soldering
DIP Soldering
Temp. at tip of iron
300
Max.
℃
(30W Max.)
Preheat temp.
100
Max.
℃
(60 sec Max.)
Soldering time
3 sec Max.
Bath temp.
260 Max.
Distance
No lower than 1.6mm from
the base of stopper
Bath time.
5 sec Max.
Distance
No lower than 1.6mm from
the base of stopper
相關PDF資料 |
PDF描述 |
|---|---|
| 37-05/A5C-ARTC | SINGLE COLOR LED, REDDISH ORANGE, 4 mm |
| 370-370-1001G | FEMALE-FEMALE, RF STRAIGHT ADAPTER |
| 3782-6501-06L | 0 MHz - 18000 MHz RF/MICROWAVE FIXED ATTENUATOR |
| 38-00-0546 | 8 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER |
| 381-102 | INTERCONNECTION DEVICE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 3701AC-11-18F-19.44000 | 功能描述:標準時鐘振蕩器 19.44MHz 1.8Volt 20ppm -20C +70C RoHS:否 制造商:AVX 產品:Standard Clock Oscillators 封裝 / 箱體:7 mm x 5 mm 頻率:75 MHz 頻率穩定性:50 PPM 電源電壓:2.5 V 負載電容: 端接類型:SMD/SMT 最小工作溫度:0 C 最大工作溫度:+ 70 C 輸出格式:LVDS 尺寸: 封裝:Reel 系列: |
| 3701AC-11-25F-19.44000 | 制造商:SiTime 功能描述:SIT3701AC-11-25F-19.44000 制造商:SiTime Corp 功能描述:SIT3701AC-11-25F-19.44000 |
| 3701AI-12-33F-24.57600 | 制造商:SiTime 功能描述:Programmable Voltage Controlled Clock Oscillator 24.576MHz 15pF ±25ppm 4-Pin QFN Bulk 制造商:SiTime Corp 功能描述:Programmable Voltage Controlled Clock Oscillator 24.576MHz 15pF 制造商:SiTime Corp 功能描述:Programmable Voltage Controlled Clock Oscillator 24.576MHz 15pF ±25ppm 4-Pin QFN Bulk |
| 3701F | 制造商:JT&T Products 功能描述: |
| 3701H-1-102 | 功能描述:精度電位計 1/2"HYBR 10TURNS 1KOHMS 0.25% RoHS:否 制造商:Bourns 產品:Precision Potentiometer 安裝風格:Panel 線性: 錐度: 轉數:3 元件類型:Wirewound 軸類型:Slotted 電阻:2 kOhms 端接類型:Solder Lug 電壓額定值: 容差:5 % |
發布緊急采購，3分鐘左右您將得到回復。