- 您現在的位置：買賣IC網 > PDF目錄293828 > 44H30-12-1-12N (GRAYHILL INC) ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.025A, 28VDC, PANEL MOUNT-THREADED PDF資料下載
參數資料
| 型號： | 44H30-12-1-12N |
| 廠商： | GRAYHILL INC |
| 元件分類： | 開關 |
| 英文描述： | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.025A, 28VDC, PANEL MOUNT-THREADED |
| 封裝： | ROHS COMPLIANT |
| 文件頁數： | 2/14頁 |
| 文件大小： | 293K |
| 代理商： | 44H30-12-1-12N |
Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois
60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com
Rotary
Switches
Multi-Deck Rotary Switches
ACCESSORIES
Internal Tooth Lockwasher–Figure A
For a 3/8" bushing. Approximately 0.500" (12,7)
outside diameter, .022" (0,56) thickness. Material
is cadmium-plated steel. Part No. 12Q1272-1
For a 1/4" bushing. Approximately
0.400" (10,16) outside diameter, .018"
(0,46) thickness. Material is passivated
stainless steel. Part No. 8J1026
Non-Turn Washer–Figure B
Can be ordered as extra hardware for the
Series 5000, 24, 42, 43, 44, 54, 71B, 53, 57 and
59 rotary switches. The internal key of the
washer slides into the bushing keyway. The
right angle tab locks into a predrilled hole on
the back side of the mounting panel. Material is
brass, cadmium plates. Part No. 12C1087-1
Panel Seal Kit–Figure C
Sold as a separate item to seal the switch
ORDERING INFORMATION: Single Shaft Switches, Add-A-Pot Switches
ORDERING INFORMATION: Concentric Shaft Rotary Switches
Series: Determined by the type of switch and
the angle of throw
Style*: Letter(s) from the Choices and Limitations chart
Angle of Throw: Must agree with Series Number
Number of Decks: As limited by the angle of throw, the poles per deck, switch style and type of contacts
44M30–02–1–12N–F
Stop Arrangement: Add letter F to a one pole per deck switch with the maximum number of positions for
a stop between position 1 and the last position. Leave blank for continuous rotation
Type of Contacts: N = Non-shorting; S = Shorting
Positions Per Pole: Requires 02 positions as a minimum to maximum allowable dependent on the angle
of throw and poles per deck. Use AJ for adjustable stops (Styles D and UD).
Poles Per Deck: As limited by angle of throw, switch series and style
* All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying
the military part number identified on the appropriate slash sheet.
Series: Determined by the angle of throw, applicable to both sections
Style*: Letter(s) from the Choices and Limitations chart
Section A (front)
Number of Decks: As limited by the number of poles per deck
Poles Per Deck: As limited by the angle of throw
Positions Per Pole: Requires 02 positions as a minimum to the maximum allowable dependent on the angle
of throw and the poles per deck
Type of Contacts: N=Non-shorting, S=Shorting. All one pole per deck switches with the maximum number
of positions are continuous rotation
43M02110N–M03203S
Section B (rear)
The limitations listed for Section A apply to Section B
Type of Contacts
Positions Per Pole
Poles Per Deck
Number of Decks
Style
* All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying
the military part number identified on the appropriate slash sheet.
Available from your local Grayhill Distributor
Non-Turn Washer
Seal
Keyed Washer
Hex Nut
FIGURE C
.625 ± .010
(15,88 ± 0,25) DIA.
.375 + .004 – .000
(9,53 + 0,10) DIA.
.375 ± .005
(9,53 ± 0,13)
.125 ± .003
(3,18 ± 0,08)
C
L
.032
± .002
(0,81
± 0,05)
.187 ± .010
(4,75 ± 0,25)
.045 ± .003
(1,14 ± 0,08)
.010 ± .002
(0,25 ± 0,05)
.562 (14,27)
ACROSS
FLATS
.088 (2,24)/
.093 (2,36)
.120 ± .003
(3,18 ± 0,08)
.060 ± .002
(1,52 ± 0,05)
.154
+ .004
–.000
(3,91
+ 0,10
–0,00)
DIA.
.437 ± .010
(11,10 ± 0,25)
.625 ± .010
(15,88 ± 0,25)
DIA.
.376 + .003 –.000
(9,55 + 0,08 –0,00)
DIA.
.125 ± .010
(3,18 ± 0,25)
.032 ± .002
(0,81 ± 0,05)
FIGURE B
FIGURE A
bushing to the panel. The kit consists of four
items: a grooved hex nut, a keyed washer, a
keyed seal and a non-turn washer. Assembly is
described on Page J-53. Dimensions of panel
seal kit items are shown in Figure C. This kit
seals the bushing to the panel; it does not seal
the shaft to the bushing. Not usable with
adjustable stop switches. Part No. 42-24
For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill.
Control knobs available.
See page I-57.
Control knobs available.
See page I-57.
J-60
相關PDF資料 |
PDF描述 |
|---|---|
| 44H90-12-1-04N | ROTARY SWITCH-4POSITIONS, SP4T, LATCHED, 0.025A, 28VDC, PANEL MOUNT-THREADED |
| 44MBGS60-01-1-06N | ROTARY SWITCH-6POSITIONS, SP6T, LATCHED, 30VDC, PANEL MOUNT-THREADED |
| 44MGS45-12-1-08S | ROTARY SWITCH-8POSITIONS, SP8T, LATCHED, 30VDC, PANEL MOUNT-THREADED |
| 44MG45-01-1-08S | ROTARY SWITCH-8POSITIONS, SP8T, LATCHED, 0.025A, 28VDC, PANEL MOUNT-THREADED |
| 44US30-01-1-12S | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 1A, 28VDC, PANEL MOUNT-THREADED |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 44H30-12-1-12S | 制造商:Grayhill 功能描述:- Bulk 制造商:Grayhill 功能描述:Switch Rotary SP12T 12 Flatted Shaft Solder Lug 1A 115VAC 115VDC |
| 44H45-01-1-02N | 制造商:Grayhill 功能描述:SWIT ROTARY SP 2 SHAFT SLDR LUG 115VAC 30VDC - Bulk 制造商:Grayhill 功能描述:Switch Rotary SPDT 2 Flatted Shaft Solder Lug 5A 115VAC 28VDC |
| 44H45-01-1-03N | 制造商:Grayhill 功能描述:SWIT ROTARY SP 3 SHAFT SLDR LUG 115VAC 30VDC - Bulk 制造商:Grayhill 功能描述:Switch Rotary SP3T 3 Flatted Shaft Solder Lug 5A 115VAC 28VDC |
| 44H45-01-1-04N | 制造商:Grayhill 功能描述:SWIT ROTARY SP 4 SHAFT SLDR LUG 115VAC 30VDC - Bulk 制造商:Grayhill 功能描述:Switch Rotary SP4T 4 Flatted Shaft Solder Lug 5A 115VAC 28VDC |
| 44H45-01-1-05N | 制造商:Grayhill 功能描述:SWIT ROTARY SP 5 SHAFT SLDR LUG 115VAC 30VDC - Bulk 制造商:Grayhill 功能描述:Switch Rotary SP5T 5 Flatted Shaft Solder Lug 5A 115VAC 28VDC |
發布緊急采購，3分鐘左右您將得到回復。