
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION
725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918
www.micropac.com
E-MAIL: OPTOSALES @ MICROPAC.COM
4N22A
4N23A JAN, JANTX, JANTXV, AND JANS SINGLE CHANNEL OPTOCOUPLERS
4N24A
OPTOELECTRONIC PRODUCTS
DIVISION
01/14/2011
Features:
Qualified to MIL-PRF-19500/486
Collector is electrically isolated from the case
Overall current gain: 1.5 typical (4N24A)
Base lead provided for conventional transistor
biasing
Rugged package
High gain, high voltage transistor
±1 kV electrical isolation
Applications:
Eliminate ground loops
Level shifting
Line receiver
Switching power supplies
Motor control
DESCRIPTION
A Gallium Aluminum Arsenide (GaAlAs) infrared LED and a high gain N-P-N silicon phototransistor packaged in a
hermetically sealed metal case. The 4N22A, 4N23A, and 4N24A differ from the 4N22, 4N23, and 4N24 only in that the
collector of the transistor is isolated from the case. The 4N22A, 4N23A and 4N24A can be tested to customer specifications.
*ABSOLUTE MAXIMUM RATINGS
Input to Output Voltage.......................................................................................................................................................
±1 kV
Emitter-Collector Voltage......................................................................................................................................................... 7 V
Collector-Emitter Voltage....................................................................................................................................................... 40 V
Collector-Base Voltage .......................................................................................................................................................... 45 V
Reverse Input Voltage ............................................................................................................................................................ 2 V
Input Diode Continuous Forward Current at (or below) 25°C Free-Air Temperature (see note 1) ................................... 40 mA
Peak Forward Input Current (Value applies for tw
< 1s PRR < 300 pps) .............................................................................1 A
Continuous Collector Current .............................................................................................................................................50 mA
Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ...............................300 mW
Storage Temperature..........................................................................................................................................-65°C to +125°C
Operating Free-Air Temperature Range ............................................................................................................-55°C to +125°C
Lead Solder Temperature (10 seconds max., 1/16” from case) ........................................................................................ 240°C
Notes:
1.
Derate linearly to 125°C free-air temperature at the rate of 0.40 mA/°C above 65°C.
2.
Derate linearly to 125°C free-air temperature at the rate of 5 mW/°C above 65°C.
JEDEC registered data
Package Dimensions
Schematic Diagram
K 7
A 5
3 C
1 E
0.370 [9.40]
0.336 [8.53]
0.335 [8.51]
0.305 [7.75]
0.185 [4.70]
0.155 [3.94]
0.500 [12.70] MIN
0.040 [1.02] MAX
0.045 [1.14]
0.029 [0.73]
0.034 [0.86]
0.028 [0.71]
45°
0.200 [5.08]
6 LEADS
0.019 [0.48]
0.016 [0.41]
7
3
5
6
1
2
ALL LINEAR DIMENSIONS ARE IN INCHES [MILLIMETERS].
2 B
COLLECTOR IS COMMON TO CASE.
THE COLLECTOR OF THE TRANSISTOR IS
ISOLATED FROM THE CASE.