- 您現在的位置：買賣IC網 > PDF目錄91414 > 5962-9083501HXX (FAIRCHILD SEMICONDUCTOR CORP) OP-AMP, 8000 uV OFFSET-MAX, MBCY12 PDF資料下載
參數資料
| 型號： | 5962-9083501HXX |
| 廠商： | FAIRCHILD SEMICONDUCTOR CORP |
| 元件分類： | 運算放大器 |
| 英文描述： | OP-AMP, 8000 uV OFFSET-MAX, MBCY12 |
| 封裝： | METAL CAN, TO-8, 12 PIN |
| 文件頁數： | 6/7頁 |
| 文件大小： | 123K |
| 代理商： | 5962-9083501HXX |
DATA SHEET
KH205
6
REV. 1A February 2001
where:
s
IP3o = third-order output intercept, dBm at
the load.
s
Po = output power level, dBm at the load.
s
HD3rd = third-order distor tion from the
fundamental, -dBc.
s
dBm is the power in mW, at the load,
expressed in dB.
Realized
third-order
output
distortion
is
highly
dependent upon the external circuit.
Some of the
common external circuit choices that improve 3rd order
distortion are:
s
short and equal return paths from the load
to the supplies.
s
de-coupling capacitors of the correct value.
s
higher load resistance.
s
a lower ratio of the output swing to the
power supply voltage.
Printed Circuit Layout
As with any high frequency device, a good PCB layout
will enhance the performance of the KH205. Good
ground plane construction and power supply bypassing
close to the package are critical to achieving full perfor-
mance. In the non-inverting configuration, the amplifier is
sensitive to stray capacitance to ground at the inverting
input. Hence, the inverting node connections should be
small with minimal stray capacitance to the ground plane
or other nodes. Shunt capacitance across the feedback
resistor should not be used to compensate for this effect.
General layout and supply bypassing play major roles in
high frequency performance. Follow the steps below as
a basis for high frequency layout:
s
Include 6.8
F tantalum and 0.1F ceramic
capacitors on both supplies.
s
Place the 6.8
F capacitors within 0.75
inches of the power pins.
s
Place the 0.1
F capacitors less than 0.1
inches from the power pins.
s
Remove the ground plane under and
around the part, especially near the input
and output pins to reduce parasitic
capacitance.
s
Minimize all trace lengths to reduce series
inductances.
s
Use flush-mount printed circuit board pins
for prototyping, never use high profile DIP
sockets.
Evaluation PC boards (part number 730008 for inverting,
730009 for non-inverting) for the KH205 are available to
aid in device testing.
相關PDF資料 |
PDF描述 |
|---|---|
| 5962-9083801HXA | DUAL OP-AMP, 1000 uV OFFSET-MAX, MBFM8 |
| 5962-9083802HXA | DUAL OP-AMP, 1000 uV OFFSET-MAX, MBFM12 |
| 5962-9083801HXX | DUAL OP-AMP, 1000 uV OFFSET-MAX, MBFM12 |
| 5962-9083801HYX | DUAL OP-AMP, 1000 uV OFFSET-MAX, MDIP12 |
| 5962-9083802HXX | DUAL OP-AMP, 1000 uV OFFSET-MAX, MBFM12 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 5962-9083801HXA | 制造商:International Rectifier 功能描述:POWER OPERATIONAL AMPLIFIER |
| 5962-9083801HXA-R | 制造商:International Rectifier 功能描述: |
| 5962-9084101MCA | 制造商:Linear Technology 功能描述:POWER SUPPLY-VOLTAGE REGULATOR |
| 5962-9084501MPA | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| 5962-9084701MRA | 制造商:Micross Components, Inc. 功能描述:DRAM, 4MB - Rail/Tube |
發布緊急采購，3分鐘左右您將得到回復。