- 您現在的位置：買賣IC網 > PDF目錄68800 > 5962R9863602VPX (ANALOG DEVICES INC) OP-AMP, 2500 uV OFFSET-MAX, CDIP8 PDF資料下載
參數資料
| 型號： | 5962R9863602VPX |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 運算放大器 |
| 英文描述： | OP-AMP, 2500 uV OFFSET-MAX, CDIP8 |
| 封裝： | CERAMIC, DIP-8 |
| 文件頁數： | 2/13頁 |
| 文件大小： | 76K |
| 代理商： | 5962R9863602VPX |
STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-98636
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43216-5000
REVISION LEVEL
A
SHEET
10
DSCC FORM 2234
APR 97
4. QUALITY ASSURANCE PROVISIONS
4.1 Sampling and inspection. For device classes Q and V, sampling and inspection procedures shall be in accordance with MIL-
PRF-38535 or as modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM plan shall not
affect the form, fit, or function as described herein. For device class M, sampling and inspection procedures shall be in accordance
with MIL-PRF-38535, appendix A.
4.2 Screening. For device classes Q and V, screening shall be in accordance with MIL-PRF-38535, and shall be conducted on
all devices prior to qualification and technology conformance inspection. For device class M, screening shall be in accordance with
method 5004 of MIL-STD-883, and shall be conducted on all devices prior to quality conformance inspection.
4.2.1 Additional criteria for device class M.
a.
Burn-in test, method 1015 of MIL-STD-883.
(1) Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level
control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify
the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in test
method 1015.
(2) TA = +125
°C, minimum.
b.
Interim and final electrical test parameters shall be as specified in table IIA herein.
4.2.2 Additional criteria for device classes Q and V.
a.
The burn-in test duration, test condition and test temperature, or approved alternatives shall be as specified in the device
manufacturer's QM plan in accordance with MIL-PRF-38535. The burn-in test circuit shall be maintained under document
revision level control of the device manufacturer's Technology Review Board (TRB) in accordance with
MIL-PRF-38535 and shall be made available to the acquiring or preparing activity upon request. The test circuit shall
specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in test
method 1015 of MIL-STD-883.
b.
Interim and final electrical test parameters shall be as specified in table IIA herein.
c.
Additional screening for device class V beyond the requirements of device class Q shall be as specified in
MIL-PRF-38535, appendix B.
4.3 Qualification inspection for device classes Q and V. Qualification inspection for device classes Q and V shall be in
accordance with MIL-PRF-38535. Inspections to be performed shall be those specified in MIL-PRF-38535 and herein for groups
A, B, C, D, and E inspections (see 4.4.1 through 4.4.4).
4.4 Conformance inspection. Technology conformance inspection for classes Q and V shall be in accordance with
MIL-PRF-38535 including groups A, B, C, D, and E inspections and as specified herein except where option 2 of
MIL-PRF-38535 permits alternate in-line control testing. Quality conformance inspection for device class M shall be in accordance
with MIL-PRF-38535, appendix A and as specified herein. Inspections to be performed for device class M shall be those specified
in method 5005 of MIL-STD-883 and herein for groups A, B, C, D, and E inspections (see 4.4.1 through 4.4.4).
4.4.1 Group A inspection.
a.
Tests shall be as specified in table IIA herein.
b.
Subgroups 7 and 8 in table I, method 5005 of MIL-STD-883 shall be omitted.
相關PDF資料 |
PDF描述 |
|---|---|
| 5962R9863602VGX | OP-AMP, 2500 uV OFFSET-MAX, MBCY8 |
| 5962R9863601VPX | OP-AMP, 2500 uV OFFSET-MAX, CDIP8 |
| 5962R9863601VGX | OP-AMP, 2500 uV OFFSET-MAX, MBCY8 |
| 5962R9863601VGA | OP-AMP, 2500 uV OFFSET-MAX, MBCY8 |
| 5962R9863601VPA | OP-AMP, 2500 uV OFFSET-MAX, CDIP8 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 5962R9863701VGA | 制造商:Analog Devices 功能描述:- Rail/Tube |
| 5962R9863701VHA | 制造商:Analog Devices 功能描述:AEROSPACE LOW INPUT CURRENT OPERATIONAL AMPLIFIER - Rail/Tube |
| 5962R9863701VPA | 制造商:Analog Devices 功能描述:OP AMP, GENERAL PURPOSE - Rail/Tube |
| 5962R9863702QZA | 制造商:Analog Devices 功能描述: |
| 5962R9863702VZA | 制造商:Analog Devices 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。