
Power Relay PK2 (THT – THR)
(Continued)
06-2011, Rev. 0611
www.te.com
2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
Automotive Relays
PCB Single Relays
Insulation Data
Initial dielectric strength
between contact and coil
500VAC
rms
Other Data
EU RoHS/ELV compliance
Ambient temperature, DC coil
Cold storage, IEC 60068-2-1
Dry heat, IEC 60068-2-2
Temperature cycling (shock),
IEC 60068-2-14, Na
Category of environmental protection,
IEC 61810
Sealing test, IEC 60068-2-17
THT
THR
Vibration resistance (functional),
IEC 68-2-6 (sine pulse form), 30 to 440Hz,
no change in the switching state >10μs
Shock resistance (functional),
IEC 68-2-27 (half sine form single pulses)
open NO contact will not close >10μs,
closed NO contact will not open >10μs
Terminal type
Weight
Solderability (aging 3: 4h/155°C)
IEC 60068-2-20, THT
IEC 60068-2-58, THR
Resistance to soldering heat THT
IEC 60068-2-20
Resistance to soldering heat THR
IEC 60068-2-58
Washing
Storage conditions
Packaging unit
6) See graph: coil operating range.
7) For general storage and processing recommendations please refer to our Application
Notes and especially to Storage in the Definitions or at http://relays.te.com/appnotes/
THT: sealed type washable
THR: sealed type vented
-40 to +105°C
6)
1000h; -40°C
1000h; +125°C
compliant
1000 cycles, -40/+125°C,
dwell time 15min
RT II - flux proof,
RT III - immersion cleanable
Qc, method 2, 1min, 70°C
vented
>20g
6ms >30g
11ms >100g
PCB THT, PCB THR
approx. 11g (0.39oz)
Ta, method 1, hot dip 5s, 215°C
Ta, method 1, hot dip 5s, 245°C
Tb, method 1A hot dip 10s, 260°C
with thermal screen
Tb, method 1A hot dip 10s, 260°C
preheating min.130°C
THT version
according to IEC 600688
7)
600 pcs.
Terminal Assignment
Bottom view on solder pins
1 form A, 1 NO
5(+)
4(-)
2(+)
1(-)
201C_PA2
201C_DD2
Dimensions
201C_DD1
*) Additional tin tops max. 1mm
201CR_PIN