
MICROPAC INDUSTRIES, INC.
OPTOELECTRONIC PRODUCTS DIVISION
725 E. Walnut St., Garland, TX 75040
(972) 272-3571
Fax (972) 487-6918
www.micropac.com
E-MAIL:
optosales@micropac.com
2 - 7
4N51, 4N52,
67023
4N53, 4N54
HERMETIC, NUMERIC AND HEXIDECIMAL DISPLAYS
*RECOMMENDED OPERATING CONDITIONS:
PARAMETER
SYMBOL
Supply Voltage
4N51
4N52
4N53
4N54
MIN
4.5
4.5
NA
4.5
MAX
5.5
5.5
NA
5.5
UNITS
V
V
NA
V
V
CC
Operating Temperature
ALL
t
A
-55
100
°
C
Enable Pulse Width 4N51
4N52
4N54
t
W
100
ns
Time data must be held before positive 4N51
transition of enable line
4N52
4N54
t
SETUP
50
ns
Time data must be held after positive 4N51
transition of enable line
4N52
4N54
t
HOLD
50
ns
Enable pulse rise time 4N51
4N52
4N54
t
TLH
200
ns
Forward Current 4N53
I
F
5
10
m
SELECTION GUIDE
67023-001
67023-101
67023-101C
67023-002
67023-102
67023-102C
67023-003
67023-103
67023-103C
67023-004
67023-104
67023-104C
67023-034
67023-315
4N51 Commercial (0
°
to
70
°
C)
4N51 Screened to TXV level (-55
°
to +100
°
C) with 100% screening.
4N51 marked with DSCC P/N JM87157/00101AXX (-55
°
to +100
°
C) with 100% screening.
4N52 Commercial (0
°
to
70
°
C)
4N52 Screened to TXV level (-55
°
to +100
°
C) with 100% screening.
4N52 marked with DSCC P/N JM87157/00102AXX (-55
°
to +100
°
C) with 100% screening.
4N53 Commercial (0
°
to
70
°
C)
4N53 Screened to TXV level (-55
°
to +100
°
C) with 100% screening.
4N53 marked with DSCC P/N JM87157/00103AXX (-55
°
to +100
°
C) with 100% screening.
4N54 Commercial (0
°
to
70
°
C)
4N54 Screened to TXV level (-55
°
to +100
°
C) with 100% screening.
4N54 marked with DSCC P/N JM87157/00104AXX (-55
°
to +100
°
C) with 100% screening.
4N54, green commercial (0
°
to
70
°
C)
4N54, green Mil-Temp (-55
°
to +100
°
C) with 100% screening.
NOTES:
1. When ordering DSCC part numbers, you may order by the MII part number or the DSCC part number.
2. The first X at the end of M87157/0010XA[X]X designates lead finish. In place of the X use A for hot solder dip
or C for gold finish.
3. Second X at the end of the M87157/0010XAX[X] designates luminous intensity code. In place of the X use C
thru K to indicate desired intensity level.
*JEDEC Registered Data