- 您現在的位置：買賣IC網 > PDF目錄68810 > 70IMX7-05-9M (POWER-ONE INC) 1-OUTPUT 6.1 W DC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | 70IMX7-05-9M |
| 廠商： | POWER-ONE INC |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT 6.1 W DC-DC REG PWR SUPPLY MODULE |
| 文件頁數： | 7/18頁 |
| 文件大小： | 175K |
| 代理商： | 70IMX7-05-9M |
Board Mountable
DC-DC Converters
IMX 7 Series
Edition 4/04.2001
15/18
90001
25.4
(1")
50.8 (2")
Measuring point of
case temperature
TC
10.5
(0.41")
1
24
(0.94")
2.8
(0.11")
3.6 (1.4")
8 x 5 (1.9")
Foot print
18
Proposed solder lands
Fig. 26
Surface mount version with PCB lid (option L)
Weight: <20 g
Safety and Installation Instructions
Installation Instruction
Installation of the DC-DC converters must strictly follow the
national safety regulations in compliance with the enclo-
sure, mounting, creepage, clearance, casualty, markings
and segregation requirements of the end-use application.
Connection to the system shall be made via a printed circuit
board according to:
Mechanical Data.
The units should be connected to a secondary circuit.
Check for hazardous voltages before altering any connec-
tions.
Do not open the module.
Ensure that a unit failure (e.g. by an internal short-circuit)
does not result in a hazardous condition. See also:
Safety
of operator accessible output circuit.
Input Fuse
To prevent excessive current flowing through the input sup-
ply line in case of a short-circuit across the converter input
an external fuse should be installed in a non earthed input
supply line. We recommend a fast acting fuse F2A for
20 IMX 7 and F1A for 40 IMX 7 and F0.63A for 70/110 IMX
7 types.
Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids has to be prevented, since the power sup-
plies are not hermetically sealed.
Standards and approvals
All DC-DC converters are pending to be UL recognized
according to UL 1950, UL recognized for Canada to CAN/
CSA C22.2 No. 950-95 and LGA approved to IEC/EN
60950 standards.
The units have been evaluated for:
Building in
Supplementary insulation input to output, based on their
maximum input voltage
The use in a pollution degree 2 environment
Connecting the input to a secondary circuit which is sub-
ject to a maximum transient rating of 1500 V for 20/40
IMX 7, 2000 V for 70 IMX 7 and 2500 V for 110 IMX 7
types.
The DC-DC converters are subject to manufacturing sur-
veillance in accordance with the above mentioned UL,
CSA, EN and ISO 9001 standards.
Protection Degree
The protection degree of the DC-DC converters is IP 30.
Fig. 25
Surface mount version with pins (option M)
Weight: <20 g
4.2 (0.17")
42.4 (1.67")
S09031
50.8 (2")
3.81(0.15")
5
x
3.81
(0.15")
3
x
5.08
(0.2")
0.8
× 1.2 (0.03 x 0.05") Pins
25.4
(1")
Measuring point of
case temperature
TC
1
4
10
14
1.2
(0.45")
相關PDF資料 |
PDF描述 |
|---|---|
| 70IMX7-03-9M | 1-OUTPUT 5 W DC-DC REG PWR SUPPLY MODULE |
| 70IMX7-05-8M | 1-OUTPUT 6.1 W DC-DC REG PWR SUPPLY MODULE |
| 70IMX7-03-8M | 1-OUTPUT 5 W DC-DC REG PWR SUPPLY MODULE |
| 70IMX7-15-15-8M | 2-OUTPUT 7.2 W DC-DC REG PWR SUPPLY MODULE |
| 70IMX7-24-24-8ZG | 2-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 70IMX7-12-12-8 | 功能描述:DC/DC轉換器 7W (2x 12V) DC Input (40-121V) RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓（標稱）: 輸出端數量:1 輸出電壓（通道 1）:3.3 V 輸出電流（通道 1）:600 mA 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:SMD/SMT 封裝 / 箱體尺寸: |
| 70IMX7-1212-8C | 功能描述:CONVERT DC/DC 2X 12V 7W RoHS:否 類別:電源 - 板載 >> DC DC Converters 系列:* 標準包裝:5 系列:* |
| 70IMX7-12-12-8G | 功能描述:DC/DC轉換器 RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓（標稱）: 輸出端數量:1 輸出電壓（通道 1）:3.3 V 輸出電流（通道 1）:600 mA 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:SMD/SMT 封裝 / 箱體尺寸: |
| 70IMX7-12-12-9 | 功能描述:CONVERT DC/DC 2X 12V 7W RoHS:否 類別:電源 - 板載 >> DC DC Converters 系列:* 標準包裝:5 系列:* |
| 70IMX7-15-15-8 | 功能描述:DC/DC轉換器 7W (2x 15V) DC Input (40-121V) RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓（標稱）: 輸出端數量:1 輸出電壓（通道 1）:3.3 V 輸出電流（通道 1）:600 mA 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:SMD/SMT 封裝 / 箱體尺寸: |
發布緊急采購，3分鐘左右您將得到回復。