參數資料
| 型號： | 73743 |
| 廠商： | Desco |
| 文件頁數： | 1/4頁 |
| 文件大小： | 0K |
| 描述： | JACKET W/SNAPS BLUE 5XLARGE |
| 標準包裝： | 1 |
| 系列： | Statshield® |
| 服裝類型： | 外套，帶按扣 |
| 尺寸： | 5XLarge |
| 材質： | 聚酯 |
| 顏色： | 藍 |
| 特點： | 袖口帶 4mm 卡扣式插口，胯部帶 4mm 卡釘 |
Statshield Smocks
Grounding, Testing and Maintenance
Description
Desco’ Statshield smocks smocks are designed to be
antistatic, low tribocharging, and create a Faraday Cage
around the torso and arms of the wearer to protect ESD
susceptible items from electrostatic fields generated by
clothing on the operator’s clothing. Static control garments
are intended to attenuate electrostatic fields that may be
present on personnel clothing. Statshield Smocks meet the
requirement for Groundable Static Control Garment System
per ANSI/ESD S20.20 required limit of < 3.5 x 107 ohm Rtg
tested per ANSI/ESD STM2.1 and ESD TR53.
“While a person may be grounded using a wrist strap or
other grounding methods, that does not mean that insulative
clothing fabrics can dissipate a charge to that person’s
Made in the
United States of America
TECHNICAL BULLETIN TB-2055
TB-2055 December 2013 Page 1 of 4
2013 DESCO INDUSTRIES INC.
Employee Owned
DESCO WEST -
3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Web Site: Desco.com
COIL CORD TO GROUND
NO WRISTBAND
NECESSARY
COIL CORD TO GROUND
WRISTBAND (NOT INCLUDED)
SNAPS TO CONNECT TO GARMENT
Figure 2. Desco Statshield Premium Jacket with Snaps.
Also available in Lab Coat length.
Figure 1. Desco Statshield Premium Lab Coat with
Conductive Cuffs. Also available in Jacket length.
skin and then to ground. Personnel clothing usually is
electrically separate or isolated from the body.” “Groundable
Static Control Garment System, Garments that are used to
establish the primary ground path for a person shall provide
a resistance of less than 35 megohms from the person to
the groundable point of the garment.”[ESD TR20.20-2008
section 5.3.13 Garments]
Statshield smocks are constructed of a lightweight
dissipative material which made from texturized polyester
and a minimum of 9% carbon nylon monofilament. The
conductive nylon fibers are woven in a chain-link design
throughout the material, providing continuous and consistent
charge dissipation. All of the seams in Statshield smocks
are designed to maintain electrical continuity from panel to
panel and from sleeve to sleeve in accordance with the ESD
Association Garment Standard, ESD-STM2.1.
“After verifying that the garment has electrical conductivity
through all panels, the garment should be electrically
bonded to the grounding system of the wearer so as not to
act as a floating conductor.” [ESD TR20.20-2008 section
5.3.13 Garments] The conductive fabric in smock is a
conductor. If not grounded, the smock can become an
isolated charged conductor. If not grounded via a wrist strap
coil cord, ground the ESD garment using ESD footwear to
ESD flooring.
The dissipative material becomes part of the ground path
to remove static charges. Statshield smocks are available
in two lengths -- the lab coat length and the jacket length.
Both lengths are available in two styles - with snaps and
with conductive elastic cuffs. Smocks are available in eight
colors* -- blue, white, teal, black, pink, grey and orange.
Statshield
smocks incorporate a “hip-to-cuff” grounding
feature which allows for hands-free grounding with no
cord attached to the operator’s wrist. This feature allows
connection of a ground cord to a 4mm snap stud on the hip.
A seam of carbon-suffused threads provides a secure and
direct electrical connection from the snap stud on the hip
to conductive elastic cuffs. Statshield smocks ground the
person when used in this manner. Standard touch testing or
continuous monitoring can be used to test the “hip-to-cuff”
function.
*Fabric lots vary slightly in color.
相關PDF資料 |
PDF描述 |
|---|---|
| PRD-5AY0-24 | RELAY GEN PURPOSE SPDT 25A 24V |
| 796690-8 | TERM BLOCK 8POS 35DEGREE 5MM |
| 73649 | COAT LAB W/SNAPS TEAL 6XLARGE |
| 0010013056 | CONN HOUSING 5POS 5.08MM |
| 1-1776244-0 | TERM BLOCK 10POS SIDE ENTRY 5MM |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 73743014 | 制造商:Amphenol Aerospace 功能描述:CONNECTOR |
| 73743054 | 制造商:Amphenol Aerospace 功能描述:CONNECTOR |
| 737431-1 | 功能描述:D-Sub后殼 CABLE CLAMP KIT F/HD CONN 15W RoHS:否 制造商:Amphenol Commercial Products 類型:Two Piece Backshell 電纜引入數量:1 電纜引入角:Straight 系列:17E 電纜直徑: 位置數量:9 外殼大小:E 外殼電鍍:Zinc |
| 737431-2 | 功能描述:D-Sub后殼 CABLE CLAMP KIT F/HD CONN 15W RoHS:否 制造商:Amphenol Commercial Products 類型:Two Piece Backshell 電纜引入數量:1 電纜引入角:Straight 系列:17E 電纜直徑: 位置數量:9 外殼大小:E 外殼電鍍:Zinc |
| 737432-2 | 制造商:TE Connectivity 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。