- 您現在的位置：買賣IC網 > PDF目錄68812 > 73M1903-IM (TERIDIAN SEMICONDUCTOR CORP) SPECIALTY CONSUMER CIRCUIT, QCC32 PDF資料下載
參數資料
| 型號： | 73M1903-IM |
| 廠商： | TERIDIAN SEMICONDUCTOR CORP |
| 元件分類： | 消費家電 |
| 英文描述： | SPECIALTY CONSUMER CIRCUIT, QCC32 |
| 封裝： | QFN-32 |
| 文件頁數： | 19/45頁 |
| 文件大?。?/td> | 449K |
| 代理商： | 73M1903-IM |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁當前第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁
73M1903
Modem Analog Front End
DATA SHEET
ge: 26 of 45
2005 TERIDIAN Semiconductor Corporation
Rev 1.4
TEST MODES
There are two loop back test modes that affect the configuration of the analog front end. The internal
loop back mode connects the serial bit stream generated by the analog receiver to the input of the analog
transmitter. This loop back mode is similar to a remote analog loop back mode and can be used to
evaluate the operation of the analog circuits. When using this loop back mode, the TXAN/TXAP pins
should not be externally coupled to the RXAP/RXAN pins. Set bit 4 (INTLB) in register 1h (CTRL2) to
enter this loop back mode.
The second loop back test mode is the external loop back mode, or local analog loop back mode. In this
mode, the analog transmitter outputs are fed back into the input of the analog receiver. Set bit 5 (ANALB)
in register 1h (CTRL2) to enter this loop back mode. In this mode, TBS must be kept to below a value
that corresponds to less than 1.16V/2.31V x -6dB = 25% of the full scale code of +/- 32768 at TXD in
order to ensure that the receiver is not overdriven beyond the maximum of 1.16Vpkpk diff for
Rxg=11(0dB) setting.
See Table 18 on page 33 for the maximum allowed transmit levels. Check the
transmitted data against received data via serial interface. This tests the functionality of essentially all
blocks, both digital and analog, of the chip.
There is a third loopback mode that bypasses the analog circuits entirely. Digital loop back forces the
transmitter digital serial bit stream (from DSDM) to be routed into the digital receiver’s sinc
3 filters. Set bit
6 (DIGLB) in register 1h (CTRL2) to enter this loop back mode.
POWER SAVING MODES
The 73M1903 has only one power conservation mode. When the ENFE, bit 7 in register 0h, is zero the
clocks to the filters and the analog are turned off. The transmit pins output a nominal 80k impedance.
The clock to the serial port is running and the GPIO and other registers can be read or updated.
相關PDF資料 |
PDF描述 |
|---|---|
| 73M1903-IGV/F | SPECIALTY CONSUMER CIRCUIT, PQFP32 |
| 73M1903-IGV | SPECIALTY CONSUMER CIRCUIT, PQFP32 |
| 73M1903-IM | SPECIALTY CONSUMER CIRCUIT, QCC32 |
| 73M1903-IM/F | SPECIALTY CONSUMER CIRCUIT, PQCC32 |
| 73M1903-IMR/F | SPECIALTY CONSUMER CIRCUIT, PQCC32 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 73M1903-IM/F | 功能描述:電信線路管理 IC Modem AFE V.22Bis-V.92 RoHS:否 制造商:STMicroelectronics 產品:PHY 接口類型:UART 電源電壓-最大:18 V 電源電壓-最小:8 V 電源電流:30 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:VFQFPN-48 封裝:Tray |
| 73M1903-IM/F1 | 功能描述:電信線路管理 IC RoHS:否 制造商:STMicroelectronics 產品:PHY 接口類型:UART 電源電壓-最大:18 V 電源電壓-最小:8 V 電源電流:30 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:VFQFPN-48 封裝:Tray |
| 73M1903-IMR/F | 功能描述:電信線路管理 IC Modem AFE V.22Bis-V.92 RoHS:否 制造商:STMicroelectronics 產品:PHY 接口類型:UART 電源電壓-最大:18 V 電源電壓-最小:8 V 電源電流:30 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:VFQFPN-48 封裝:Tray |
| 73M1903-IMR/F1 | 功能描述:電信線路管理 IC RoHS:否 制造商:STMicroelectronics 產品:PHY 接口類型:UART 電源電壓-最大:18 V 電源電壓-最小:8 V 電源電流:30 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:VFQFPN-48 封裝:Tray |
| 73M1903-IVT/F | 功能描述:IC MODEM AFE V.22BIS 20-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模擬前端 (AFE) 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:- 通道數:2 功率（瓦特）:- 電壓 - 電源，模擬:3 V ~ 3.6 V 電壓 - 電源，數字:3 V ~ 3.6 V 封裝/外殼:32-VFQFN 裸露焊盤 供應商設備封裝:32-QFN（5x5） 包裝:帶卷 (TR) |
發布緊急采購，3分鐘左右您將得到回復。