
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
E-1
Rev. 04-July-2009
2009 Glenair, Inc.
Printed in U.S.A.
www.glenair.com
E-Mail: sales@glenair.com
Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
A
B
C
D
E
F
G
H
I
P
M
PANEL RECEPtACLES WIth PIN CoNtACtS, CRIMP tERMINAtIoN, 790-026P
HOW TO ORDER
Sample Part Number
MT
790-026P
L-6P6
G
Part Number
Shell Size -
Insert Arr.
Shell Finish
Hardware Option
790-026P
Rear Panel Mounted
Receptacle with Pin
Contacts
See Table 1 for
Available Insert
Arrangements
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in the
insert arrangement.
Example:
36P2
is supplied with 2
power pins.
36W2
is supplied less
the power pins.
See Section B for
coaxial contacts
purchased separately.
M
Electroless Nickel
general purpose applications
MT
Nickel-PTFE
1000 Hour Grey
maximum corrosion protection
and durability
(non-reflective grey)
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
Additional shell finishes are
listed on page C-9.
N
No Hardware
P
Female Jackpost
G
Guide Pin
S
Female Guide Socket
MATERIALS AND FINISHES
Shell
Aluminum alloy
Copper alloy, 50 microinches gold
plated
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Fluorosilicone, conductive
Contacts
Insulators
Retention Clips
Interfacial Seal, Grommet
Hardware
Panel Gasket
790-026P connectors are designed for rear-panel mounting and are supplied with
conductive panel gaskets. These connectors feature machined aluminum shells,
fluorosilicone face seals and wire grommets for environmental protection. Contacts are
rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged
separately. Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts accept
#16-18 AWG wire. Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities
also accept coaxial contacts purchased separately. Attach optional shielding adapters
(799-016) for EMI protection.
SPECIFICATIONS
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.