- 您現在的位置：買賣IC網 > PDF目錄36329 > 935059280112 (NXP SEMICONDUCTORS) 55 W, 2 CHANNEL, AUDIO AMPLIFIER, PZIP13 PDF資料下載
參數資料
| 型號： | 935059280112 |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 音頻／視頻放大 |
| 英文描述： | 55 W, 2 CHANNEL, AUDIO AMPLIFIER, PZIP13 |
| 封裝： | POWER, PLASTIC, SOT-141-6, DIL-BENT-SIL, 13 PIN |
| 文件頁數： | 8/18頁 |
| 文件大小： | 141K |
| 代理商： | 935059280112 |
1996 Jan 08
16
Philips Semiconductors
Product specication
2
× 40 W/2 stereo BTL car radio
power amplier with diagnostic facility
TDA8560Q
SOLDERING
Introduction
There is no soldering method that is ideal for all IC
packages. Wave soldering is often preferred when
through-hole and surface mounted components are mixed
on one printed-circuit board. However, wave soldering is
not always suitable for surface mounted ICs, or for
printed-circuits with high population densities. In these
situations reflow soldering is often used.
This text gives a very brief insight to a complex technology.
A more in-depth account of soldering ICs can be found in
our
“IC Package Databook” (order code 9398 652 90011).
Soldering by dipping or by wave
The maximum permissible temperature of the solder is
260
°C; solder at this temperature must not be in contact
with the joint for more than 5 seconds. The total contact
time of successive solder waves must not exceed
5 seconds.
The device may be mounted up to the seating plane, but
the temperature of the plastic body must not exceed the
specified maximum storage temperature (Tstg max). If the
printed-circuit board has been pre-heated, forced cooling
may be necessary immediately after soldering to keep the
temperature within the permissible limit.
Repairing soldered joints
Apply a low voltage soldering iron (less than 24 V) to the
lead(s) of the package, below the seating plane or not
more than 2 mm above it. If the temperature of the
soldering iron bit is less than 300
°C it may remain in
contact for up to 10 seconds. If the bit temperature is
between 300 and 400
°C, contact may be up to 5 seconds.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
Data sheet status
Objective specication
This data sheet contains target or goal specications for product development.
Preliminary specication
This data sheet contains preliminary data; supplementary data may be published later.
Product specication
This data sheet contains nal product specications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specication
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specication.
相關PDF資料 |
PDF描述 |
|---|---|
| 935258520112 | 55 W, 2 CHANNEL, AUDIO AMPLIFIER, PZIP13 |
| 935264190112 | 55 W, 2 CHANNEL, AUDIO AMPLIFIER, PZIP13 |
| 935063030112 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935063030118 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935064350112 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 93505A180 | 制造商:MISC. SPCR/STNDF/HND 功能描述: |
| 93505A43 | 制造商:FLORIDA MISC. 功能描述: 制造商:Florida Misc. 功能描述: |
| 93505A435 | 制造商:FLORIDA MISC. 功能描述: 制造商:Florida Misc. 功能描述: |
| 93505A810 | 制造商:FLORIDA MISC. 功能描述: |
| 935066270112 | 制造商:NXP Semiconductors 功能描述:SUB ONLY I.C. |
發布緊急采購，3分鐘左右您將得到回復。