- 您現在的位置：買賣IC網 > PDF目錄36335 > 935249180112 (NXP SEMICONDUCTORS) 12 W, 4 CHANNEL, AUDIO AMPLIFIER, PZIP17 PDF資料下載
參數資料
| 型號： | 935249180112 |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 音頻／視頻放大 |
| 英文描述： | 12 W, 4 CHANNEL, AUDIO AMPLIFIER, PZIP17 |
| 封裝： | POWER, PLASTIC, SOT-243-1, DIL-BENT-SIL, 17 PIN |
| 文件頁數： | 15/26頁 |
| 文件大小： | 151K |
| 代理商： | 935249180112 |
1999 Jun 30
22
Philips Semiconductors
Product specication
2
× 24 W BTL or 4 × 12 W single-ended
car radio power amplier
TDA8561Q
SOLDERING
Introduction to soldering through-hole mount
packages
This text gives a brief insight to wave, dip and manual
soldering. A more in-depth account of soldering ICs can be
found in our
“Data Handbook IC26; Integrated Circuit
Packages” (document order number 9398 652 90011).
Wave soldering is the preferred method for mounting of
through-hole mount IC packages on a printed-circuit
board.
Soldering by dipping or by solder wave
The maximum permissible temperature of the solder is
260
°C; solder at this temperature must not be in contact
with the joints for more than 5 seconds.
The total contact time of successive solder waves must not
exceed 5 seconds.
The device may be mounted up to the seating plane, but
the temperature of the plastic body must not exceed the
specified maximum storage temperature (Tstg(max)). If the
printed-circuit board has been pre-heated, forced cooling
may be necessary immediately after soldering to keep the
temperature within the permissible limit.
Manual soldering
Apply the soldering iron (24 V or less) to the lead(s) of the
package, either below the seating plane or not more than
2 mm above it. If the temperature of the soldering iron bit
is less than 300
°C it may remain in contact for up to
10 seconds. If the bit temperature is between
300 and 400
°C, contact may be up to 5 seconds.
Suitability of through-hole mount IC packages for dipping and wave soldering methods
Note
1. For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit board.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
PACKAGE
SOLDERING METHOD
DIPPING
WAVE
DBS, DIP, HDIP, SDIP, SIL
suitable
suitable(1)
Data sheet status
Objective specication
This data sheet contains target or goal specications for product development.
Preliminary specication
This data sheet contains preliminary data; supplementary data may be published later.
Product specication
This data sheet contains nal product specications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specication
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specication.
相關PDF資料 |
PDF描述 |
|---|---|
| 935251700112 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935251700118 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935251700512 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935251700518 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935261037112 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 9-3525-012 | 制造商:KEYSTONE 功能描述:MODIFIED 3525,VERSION E |
| 935252-5 | 制造商:C-H 功能描述:935252-5 |
| 935257650112 | 制造商:NXP Semiconductors 功能描述:SUB ONLY ICSUBS TO 935257650112 |
| 935260093112 | 制造商:NXP Semiconductors 功能描述:IC AVIC ADV BASESTATION 14SOIC |
| 935261069122 | 制造商:NXP Semiconductors 功能描述:IC SECURITY TRANSPONDER PLLMC |
發布緊急采購，3分鐘左右您將得到回復。