- 您現在的位置：買賣IC網 > PDF目錄36336 > 935260767512 (NXP SEMICONDUCTORS) SPECIALTY CONSUMER CIRCUIT, PDSO28 PDF資料下載
參數資料
| 型號： | 935260767512 |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 消費家電 |
| 英文描述： | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 封裝： | PLASTIC, SOT-341, SSOP-28 |
| 文件頁數： | 13/44頁 |
| 文件大小： | 241K |
| 代理商： | 935260767512 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁當前第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁
2000 Jan 24
20
Philips Semiconductors
Product specication
5 V mixers/oscillators and synthesizers for
cable TV and VCR 2-band tuners
TDA6402; TDA6402A;
TDA6403; TDA6403A
5. The frequency drift is defined as a change in oscillator frequency when the ambient temperature varies from
Tamb =25to50 °C or from Tamb =25to0 °C. The oscillator is free running during this measurement. The VHF drift
value can be improved by adding a 10 k
resistor between the VHFOSCOC pin and the VCC. In that case the typical
VHF drift value can be reduced to 900 kHz.
6. Switch-on drift is defined as the change in oscillator frequency between 5 s and 15 min after switch on. The oscillator
is free running during this measurement.
7. The ripple susceptibility is measured for a 500 kHz ripple at the IF output using the measurement circuit of Fig.19;
the level of the ripple signal is increased until a difference of 53.5 dB occurs between the IF carrier fixed at 100 dB
V
and the sideband components.
8. This is the level of divider interferences close to the IF frequency. For example channel C: fOSC = 179 MHz,
1
4 fOSC = 44.75 MHz. Divider interference is measured with the Philips 37185 demonstration board in accordance
with Fig.19. All ground pins are connected to a single ground plane under the IC. The VHFIN input must be left open
(i.e. not connected to any load or cable); The UHFIN1 and UHFIN2 inputs are connected to a hybrid.
The measured levels of divider interference are influenced by layout, grounding and port decoupling.
The measurement results could vary by as much as 10 dB with respect to the specification.
9. Crystal oscillator interference means the 4 MHz sidebands caused by the crystal oscillator. The rejection has to be
greater than 60 dB for an IF output signal of 100 dB
V.
10. The reference frequency rejection is the level of reference frequency sidebands related to the sound sub-carrier.
The rejection has to be greater than 50 dB for an IF output signal of 100 dB
V.
11. Channel 6 beat is the interfering product of fRFpix +fRFsnd fOSC of channel 6 at 42 MHz.
12. Channel A-5 beat is the interfering product of fRFpix, fIF and fOSC of channel A-4; fBEAT = 45.5 MHz. The possible
mechanisms are: fOSC 2 × fIF or 2 × fRFpix fOSC. For the measurement VRF =80dBV.
Fig.9 Input admittance (S11) of the VHF mixer input (40 to 400 MHz); Y0 = 20 mS.
handbook, full pagewidth
MGE722
0.2
2
1
0.5
10
5
0.2
2
1
0.5
10
5
∞
0
+ j
– j
0.2
0.5
1
2
5
10
40 MHz
400 MHz
相關PDF資料 |
PDF描述 |
|---|---|
| 935260767518 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935261221112 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935261221118 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935261221512 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
| 935261221518 | SPECIALTY CONSUMER CIRCUIT, PDSO28 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 935261069122 | 制造商:NXP Semiconductors 功能描述:IC SECURITY TRANSPONDER PLLMC |
| 935262025112 | 制造商:NXP Semiconductors 功能描述:SUB ONLY IC |
| 935262217118 | 制造商:NXP Semiconductors 功能描述:Real Time Clock Serial 8-Pin SO T/R |
| 935264217557 | 制造商:NXP Semiconductors 功能描述:SUB ONLY IC |
| 935267356112 | 制造商:NXP Semiconductors 功能描述:IC TEA1507PN |
發布緊急采購，3分鐘左右您將得到回復。