
ISP1160
Embedded Universal Serial Bus Host Controller
Rev. 03 — 27 February 2003
Product data
1.
General description
The ISP1160 is an embedded Universal Serial Bus (USB) Host Controller (HC) that
complies with Universal Serial Bus Specication Rev. 2.0, supporting data transfer at
full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s). The ISP1160 provides two
downstream ports. Each downstream port has its own overcurrent (OC) detection
input pin and power supply switching control output pin. The downstream ports for the
HC can be connected with any USB compliant USB devices and USB hubs that have
USB upstream ports.
The ISP1160 is well suited for embedded systems and portable devices that require a
USB host. The ISP1160 brings high exibility to the systems that have it built-in. For
example, a system that has the ISP1160 built-in allows it to be connected to a device
that has a USB upstream port, such as a USB printer, USB camera, USB keyboard,
USB mouse, among others.
2.
Features
s Complies with Universal Serial Bus Specication Rev. 2.0
s Supports data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s)
s Adapted from Open Host Controller Interface Specication for USB Release 1.0a
s Selectable one or two downstream ports for HC
s High-speed parallel interface to most of the generic microprocessors and
Reduced Instruction Set Computer (RISC) processors such as:
x Hitachi SuperH SH-3 and SH-4
x MIPS-based RISC
x ARM7, ARM9, StrongARM
s Maximum data transfer rate of 15 Mbyte/s between microprocessor and HC
s Supports single-cycle and burst mode DMA operations
s Built-in FIFO buffer RAM for HC (4 kbytes)
s Endpoints with double buffering to increase throughput and ease real-time data
transfer Isochronous (ISO) transactions
s 6 MHz crystal oscillator with integrated PLL for low EMI
s Built-in software selectable internal 15 k
pull-down resistors for HC downstream
ports
s Dedicated pins for suspend sensing output and wake-up control input for exible
applications
s Operation at either +5 V or +3.3 V power supply voltage
s Operating temperature range from
40 to +85 °C
s Available in two LQFP64 packages (SOT314-2 and SOT414-1).