- 您現在的位置：買賣IC網 > PDF目錄24836 > 935285129112 (NXP SEMICONDUCTORS) LED DISPLAY DRIVER, PDSO28 PDF資料下載
參數資料
| 型號： | 935285129112 |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 顯示驅動器 |
| 英文描述： | LED DISPLAY DRIVER, PDSO28 |
| 封裝： | 4.40 MM, PLASTIC, MO-153, SOT361-1, TSSOP-28 |
| 文件頁數： | 1/54頁 |
| 文件大小： | 410K |
| 代理商： | 935285129112 |
當前第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁
1.
General description
The PCA9685 is an I2C-bus controlled 16-channel LED controller optimized for LCD
Red/Green/Blue/Amber (RGBA) color backlighting applications. Each LED output has its
own 12-bit resolution (4096 steps) xed frequency individual PWM controller that operates
at a programmable frequency from a typical of 40 Hz to 1000 Hz with a duty cycle that is
adjustable from 0 % to 100 % to allow the LED to be set to a specic brightness value.
All outputs are set to the same PWM frequency.
Each LED output can be off or on (no PWM control), or set at its individual PWM controller
value. The LED output driver is programmed to be either open-drain with a 25 mA current
sink capability at 5 V or totem pole with a 25 mA sink, 10 mA source capability at 5 V. The
PCA9685 operates with a supply voltage range of 2.3 V to 5.5 V and the inputs and
outputs are 5.5 V tolerant. LEDs can be directly connected to the LED output (up to
25 mA, 5.5 V) or controlled with external drivers and a minimum amount of discrete
components for larger current or higher voltage LEDs.
The PCA9685 is in the new Fast-mode Plus (Fm+) family. Fm+ devices offer higher
frequency (up to 1 MHz) and more densely populated bus operation (up to 4000 pF).
Although the PCA9635 and PCA9685 have many similar features, the PCA9685 has
some unique features that make it more suitable for applications such as LCD backlighting
and Ambilight:
The PCA9685 allows staggered LED output on and off times to minimize current
surges. The on and off time delay is independently programmable for each of the
16 channels. This feature is not available in PCA9635.
The PCA9685 has 4096 steps (12-bit PWM) of individual LED brightness control. The
PCA9635 has only 256 steps (8-bit PWM).
When multiple LED controllers are incorporated in a system, the PWM pulse widths
between multiple devices may differ if PCA9635s are used. The PCA9685 has a
programmable prescaler to adjust the PWM pulse widths of multiple devices.
The PCA9685 has an external clock input pin that will accept user-supplied clock
(50 MHz max.) in place of the internal 25 MHz oscillator. This feature allows
synchronization of multiple devices. The PCA9635 does not have external clock input
feature.
Like the PCA9635, PCA9685 also has a built-in oscillator for the PWM control.
However, the frequency used for PWM control in the PCA9685 is adjustable from
about 40 Hz to 1000 Hz as compared to the typical 97.6 kHz frequency of the
PCA9635. This allows the use of PCA9685 with external power supply controllers. All
bits are set at the same frequency.
The Power-On Reset (POR) default state of LEDn output pins is LOW in the case of
PCA9685. It is HIGH for PCA9635.
PCA9685
16-channel, 12-bit PWM Fm+ I2C-bus LED controller
Rev. 02 — 16 July 2009
Product data sheet
相關PDF資料 |
PDF描述 |
|---|---|
| 935285129118 | LED DISPLAY DRIVER, PDSO28 |
| 935287058118 | LED DISPLAY DRIVER, PQCC28 |
| 935289802118 | LED DISPLAY DRIVER, PDSO28 |
| 935288883112 | DATACOM, INTERFACE CIRCUIT, PDSO8 |
| 935288883115 | DATACOM, INTERFACE CIRCUIT, PDSO8 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 935286409157 | 制造商:NXP Semiconductors 功能描述:IC AMP AUDIO DGTL MONO D 24HVQFN |
| 935286496115 | 制造商:NXP Semiconductors 功能描述:IC ANALOG SWITCH SPDT 10XQFN |
| 935286689118 | 制造商:NXP Semiconductors 功能描述:935286689118 |
| 935286882115 | 制造商:NXP Semiconductors 功能描述:IC ANALOG SWITCH SPDT 10HVSON |
| 935286883115 | 制造商:NXP Semiconductors 功能描述:IC BUFFER/LINE DVR 3STATE 10XSON |
發布緊急采購，3分鐘左右您將得到回復。