- 您現在的位置：買賣IC網 > PDF目錄352487 > A1301KUA-T (Allegro MicroSystems, Inc.) Continuous-Time Ratiometric Linear Hall Effect Sensors PDF資料下載
參數資料
| 型號： | A1301KUA-T |
| 廠商： | Allegro MicroSystems, Inc. |
| 英文描述： | Continuous-Time Ratiometric Linear Hall Effect Sensors |
| 中文描述： | 連續時間成比例線性霍爾效應傳感器 |
| 文件頁數： | 1/8頁 |
| 文件大小： | 293K |
| 代理商： | A1301KUA-T |
A1301 and A1302
A1301-DS, Rev. 2
Worcester, Massachusetts 01615-0036 (508) 853-5000
115 Northeast Cutoff, Box 15036
www.allegromicro.com
Allegro MicroSystems, Inc.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC ............................................8 V
Output Voltage, VOUT ..........................................8 V
Reverse-Supply Voltage, VRCC .......................–0.1 V
Reverse-Output Voltage, VROUT .....................–0.1 V
Output Sink Current, IOUT ............................. 10 mA
Operating Temperature
Ambient, TA, Range E..................–40C to 85C
Ambient, TA, Range K ...............–40C to 125C
Maximum Junction, TJ(max)........................165C
Storage Temperature, TS ..................–65C to 170C
Low-noise output
Fast power-on time
Ratiometric rail-to-rail output
4.5 to 6.0 V operation
Solid-state reliability
Factory-programmed at end-of-line for optimum performance
Robust ESD performance
The A1301 and A1302 are continuous-time, ratiometric, linear Hall-effect sensors.
They are optimized to accurately provide a voltage output that is proportional to
an applied magnetic field. These devices have a quiescent output voltage that is
50% of the supply voltage. Two output sensitivity options are provided: 2.5 mV/G
typical for the A1301, and 1.3 mV/G typical for the A1302.
The Hall-effect integrated circuit included in each device includes a Hall sensing
element, a linear amplifier, and a CMOS Class A output structure. Integrating the
Hall sensing element and the amplifier on a single chip minimizes many of the
problems normally associated with low voltage level analog signals.
High precision in output levels is obtained by internal gain and offset trim adjust-
ments made at end-of-line during the manufacturing process.
These features make the A1301 and A1302 ideal for use in position sensing
systems, for both linear target motion and rotational target motion. They are well-
suited for industrial applications over extended temperature ranges, from –40°C to
125°C.
Two device package types are available: LH, a 3-pin SOT23W type for surface
mount, and UA, a 3-pin ultramini SIP for through-hole mount. Each package is
available in a lead (Pb) free version (suffix, –T) with 100% matte tin plated lead-
frame.
Continuous-Time Ratiometric Linear Hall Effect Sensors
Features and Benefits
Package UA, 3-pin SIP
1
2
3
1. VCC
2. GND
3. VOUT
Package LH, 3-pin Surface Mount
1
2
3
1. VCC
2. VOUT
3. GND
相關PDF資料 |
PDF描述 |
|---|---|
| A3421LKA | HALL-EFFECT, DIRECTION-DETECTION SENSORS |
| A3141LLT | SENSITIVE HALL-EFFECT SWITCHES FOR HIGH-TEMPERATURE OPERATION |
| A3281LUA | HALL-EFFECT LATCHES FOR HIGH-TEMPERATURE OPERATION |
| A3281UA | CHOPPER-STABILIZED, PRECISION HALL-EFFECT LATCHES |
| A1101EUA-T | Continuous-Time Switch Family |
相關代理商/技術參數 |
參數描述 |
|---|---|
| A1302 | 制造商:ALLEGRO 制造商全稱:Allegro MicroSystems 功能描述:Continuous-Time Ratiometric Linear Hall Effect Sensors |
| A-1302 | 制造商:TSAY-E International 功能描述:Bulk |
| A130-2 | 功能描述:SCREWDRIVER SLOTTED 1/8" 3.88" 制造商:klein tools, inc. 系列:- 零件狀態:在售 工具類型:螺絲刀 尖頭 - 類型:開槽型 尺寸:1/8" 長度 - 插片:2.00"（50.8mm） 長度 - 總:3.88"（98.6mm） 特性:黑色刀頭，表面鍍鉻，口袋夾 重量:0.05 磅（22.68g） 標準包裝:12 |
| A13020.0 | 制造商:DORMER 功能描述:DRILL TAPER SHANK HSS 20MM |
| A13020.5 | 制造商:DORMER 功能描述:DRILL TAPER SHANK HSS 20.5MM |
發布緊急采購，3分鐘左右您將得到回復。