- 您現在的位置：買賣IC網 > Datasheet目錄59 > A3251LUA-T (Allegro Microsystems Inc)IC SW HALL EFFECT UNI 3-SIP Datasheet資料下載
參數資料
| 型號： | A3251LUA-T |
| 廠商： | Allegro Microsystems Inc |
| 文件頁數： | 11/16頁 |
| 文件大小： | 300K |
| 描述： | IC SW HALL EFFECT UNI 3-SIP |
| 標準包裝： | 500 |
| 傳感范圍： | 50G |
| 類型： | 單極開關 |
| 電源電壓： | 4.2 V ~ 24 V |
| 電流 - 電源： | 10mA |
| 電流 - 輸出（最大）： | 20mA |
| 輸出類型： | 數字，開路集電極 |
| 特點： | 穩壓電壓 |
| 工作溫度： | -40°C ~ 150°C |
| 封裝/外殼： | 3-SIP |
| 供應商設備封裝： | 3-SIP |
| 包裝： | 散裝 |
Field-Programmable, Chopper-Stabilized,
Unipolar Hall-Effect Switches
A3250 and
A3251
10
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
The pulse sequences consist of the following groups of pulses:
1. An enable sequence.
2. A bitfield address sequence.
3. When permanently setting the bitfield, a long V
PH
fuse-blow-
ing pulse. (Note: Blown bit fuses cannot be reset.)
4. When permanently setting the bitfield, the level of V
CC
must
be allowed to drop to zero between each pulse sequence, in
order to clear all registers. However, when provisionally set-
ting bitfields, V
CC
must be maintained at V
PL
between pulse
sequences, in order to maintain the prior bitfield settings while
preparing to set additional bitfields.
Bitfields that are not set are evaluated as zeros. The bitfield-level
fuses for 0 value bitfields are never blown. This prevents inad-
vertently setting the bitfield to 1. Instead, blowing the device-
level fuse protects the 0 bitfields from being accidentally set in
the future.
When provisionally trying the calibration value, one pulse
sequence is used, using decimal values. The sequence for setting
the value 5
10
is shown in figure 2.
When permanently setting values, the bitfields must be set indi-
vidually, and 5
10
must be programmed as binary 101. Bit 3 is
set to 1 (000100
2
, which is 4
10
), then bit 1 is set to 1 (000001
2
,
which is 1
10
). Bit 2 is ignored, and so remains 0.Two pulse
sequences for permanently setting the calibration value 5 are
shown in figure 3. The final V
PH
pulse is maintained for a longer
period, enough to blow the corresponding bitfield-level fuse.
V
PH
V+
t
V
PM
V
PL
0
Encode 00100
2
(4
10
)
Enable
Address
Address
Blow
Blow
Enable
Encode 00001
2
(1
10
)
Figure 3. Pulse sequence to permanently encode calibration value 5 (101 binary, or
bitfield address 3 and bitfield address 1).
V
PH
V+
t
V
PM
V
PL
0
Try 5
10
Enable
Address
Clear
Optional
Monitoring
Figure 2. Pulse sequence to provisionally try calibration value 5.
相關PDF資料 |
PDF描述 |
|---|---|
| A3260LUA | IC SW HALL EFFECT BIPO 3-SIP |
| A3282LLHLT-T | IC SW HALL EFFECT CHOPPER SOT23W |
| A3340EUA-T | IC SW HALL EFFECT PREC 3-SIP |
| A3422LKA-T | IC SENSOR DIRECT/DETECT 5-SIP |
| AAH002-02 | SENSORS MAGNETIC FIELD 8SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| A3251LUATL | 制造商:ALLEGRO 制造商全稱:Allegro MicroSystems 功能描述:Field-Programmable, Chopper-Stabilized Unipolar Hall-Effect Switches |
| A325400284-200 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| A32550-0009 | 功能描述:重負荷電源連接器 A32 SOCKET 50mm 50MMSKTCON RoHS:否 制造商:Hirose Connector 系列:PS2 產品類型:Connectors 位置/觸點數量: 端接類型:Crimp 觸點材料: 觸點電鍍:Gold 電壓額定值: 電流額定值:300 A 附件類型: |
| A32550-0049 | 功能描述:重負荷電源連接器 A32 SOCKET 50mm WITH 2 AUX/2 PILOT CONT RoHS:否 制造商:Hirose Connector 系列:PS2 產品類型:Connectors 位置/觸點數量: 端接類型:Crimp 觸點材料: 觸點電鍍:Gold 電壓額定值: 電流額定值:300 A 附件類型: |
| A32550-1009 | 功能描述:重負荷電源連接器 A32 SOCKET 50mm 50MMSKTCON RoHS:否 制造商:Hirose Connector 系列:PS2 產品類型:Connectors 位置/觸點數量: 端接類型:Crimp 觸點材料: 觸點電鍍:Gold 電壓額定值: 電流額定值:300 A 附件類型: |
發布緊急采購，3分鐘左右您將得到回復。