- 您現在的位置：買賣IC網 > PDF目錄57567 > ACSM2066PM34 1000 MHz - 2000 MHz RF/MICROWAVE LINEAR DETECTOR, 20 dBm INPUT POWER-MAX PDF資料下載
參數資料
| 型號： | ACSM2066PM34 |
| 元件分類： | 檢測器 |
| 英文描述： | 1000 MHz - 2000 MHz RF/MICROWAVE LINEAR DETECTOR, 20 dBm INPUT POWER-MAX |
| 封裝： | HERMETIC SEALED, CASE M34, 3 PIN |
| 文件頁數： | 1/2頁 |
| 文件大?。?/td> | 124K |
| 代理商： | ACSM2066PM34 |
611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com
www.advanced-control.com
Each detector model contains:
Input Impedance Matching
DC return
RF bypass capacitor
Detector diode
Video protection diode
Features:
Static Protection
High Sensitivity
Small Size
Applications:
Transmitter Monitoring
Radar Equipment
Missile Guidance Systems
Input to Low-Noise Amplifiers
Broadband Or Narrowband ECM Receivers
Power and Signal Monitors
Doppler Radar and Beacon Receivers
Matched units available for Multi-channel Receivers, Amplitude Comparator Systems and Discriminators
Minimum
Flatness
Nominal (3)
Frequency
Sensitivity
vs
Typical (2)
Video
Standard
Optional
Range
Part (1)
K
Frequency
TSS
Capacitance
Case
(GHz)
Number
(mV/mW)
(+/-dB)
(dBm)
(pF)
Styles
0.1 - 1
ACSM2035N
2000
0.25
-52
270
M12
M34, M35, M47
0.5 - 2
ACSM2001N
2000
0.4
-53
75
M12
M34, M35, M47
1 - 2
ACSM2066N
2000
0.2
-53
20
M12
M34,M35,M47,M50,M51
0.5 - 4
ACSM2108N
2000
0.4
-53
20
M12
M43, M50, M51
1 - 4
ACSM2038N
2000
0.4
-53
20
M12
M50, M51
2 - 4
ACSM2002N
2000
0.4
-53
20
M12
M50, M51
1 - 8
ACSM2075N
2000
0.5
-53
20
M12
—
2 - 8
ACSM2014N
2000
0.5
-53
20
M12
—
4 - 8
ACSM2003N
2000
0.4
-53
20
M12
M50, M51
2 - 12
ACSM2007N
2000
0.9
-52
20
M12
—
8 - 12
ACSM2004N
2000
0.65
-52
12
M12
—
1 - 18
ACSM2047N
1800
1.0
-51
20
M12
—
2 - 18
ACSM2006N
1800
1.0
-51
12
M12
—
8 - 18
ACSM2015N
1800
0.7
-52
12
M12
—
12 - 18
ACSM2005N
2000
0.6
-52
12
M12
—
NOTES:
1)
Standard output polarity is negative. If negative output is required, substitute “P” for “N” in part number.
2)
Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with respect to noise. It is measured using a video amplifier with
a 2MHz bandwidth and a 3dB noise figure.
3)
Video capacitance is used for RF bypass. This value can be changed if required for video response time or other considerations.
Contact the factory if value other than those shown are needed.
4)
Video protection is available on most models. This feature helps to prevent damage to the detector diode from incidents occurring at the
video port. Transient electromagnetic spikes, static contact, or voltage surges can easily damage a detector diode. A video protection
diode will clamp the voltage at a value less than the detector breakdown voltage. NOTE: Inclusion of this protection will cause the
output voltage to compress and clamp. This occurs at about +10dBm input to the detector. If operation above +10dBm is required then
the output protection should be modified or excluded. Adding a suffix “X” at the end of the model number will exclude the video
protection feature. Contact the factory for assistance.
5)
Zero bias schottky versions are available for most of listed biased schottky models with only minor differences in specifications.
a.
The zero bias schottky has an impedance of several thousand ohms.
b.
Zero bias schottky detectors exhibit less sensitive TSS due to the high diode impedance (typically a 3dB reduction).
c.
The temperature performance of the zero bias schottky is poor when operating at low input power levels. This difference
becomes small at high levels (above 0dBm input power). The part number of zero bias versions includes a “Z” following the
polarity indicator.
High sensitivity and superior electrical and environmental reliability characterize
these module detectors. They are hermetically sealed and contain internal RF
matching, DC return, and RF bypass capacitor. In addition, the video port can
be protected from static or transient voltages. This feature prevents damage
due to handling (usually static) or system video transients. Models may be
chosen for broadband RF performance or for optimized narrow bands. They
may be used in microstrip or stripline applications for power monitoring,
broadband ECM receivers, radar equipment, beacon or multi-channel receivers.
SCHOTTKY DIODE MODULE DETECTORS
相關PDF資料 |
PDF描述 |
|---|---|
| ACSM2066PM35X | 1000 MHz - 2000 MHz RF/MICROWAVE LINEAR DETECTOR, 20 dBm INPUT POWER-MAX |
| ACSM2066PM35 | 1000 MHz - 2000 MHz RF/MICROWAVE LINEAR DETECTOR, 20 dBm INPUT POWER-MAX |
| ACSM2066PM47X | 1000 MHz - 2000 MHz RF/MICROWAVE LINEAR DETECTOR, 20 dBm INPUT POWER-MAX |
| ACSM2066PM50X | 1000 MHz - 2000 MHz RF/MICROWAVE LINEAR DETECTOR, 20 dBm INPUT POWER-MAX |
| ACSM2066PM51X | 1000 MHz - 2000 MHz RF/MICROWAVE LINEAR DETECTOR, 20 dBm INPUT POWER-MAX |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ACSNK-003 | 制造商:IDEC CORPORATION 功能描述:CUSTOM (Drawing Required) CAM |
| ACSNK-004 | 制造商:IDEC CORPORATION 功能描述:CUSTOM (Drawing Required) CAM |
| ACSNK-004-KEY#302 | 制造商:IDEC CORPORATION 功能描述:CUSTOM(Drawing Required) CAM S |
| ACSNK-004-RL | 制造商:IDEC CORPORATION 功能描述:CUSTOM (Drawing Required) CAM |
| ACSNK-006 | 制造商:IDEC CORPORATION 功能描述:CUSTOM (Drawing Required) CAM |
發布緊急采購，3分鐘左右您將得到回復。