- 您現在的位置：買賣IC網 > PDF目錄373914 > AD7705EB (Analog Devices, Inc.) Precision Zero-Drift Operational Amplifier with Internal Capacitors; Package: SO; No of Pins: 8; Temperature Range: 0°C to +70°C PDF資料下載
參數資料
| 型號： | AD7705EB |
| 廠商： | Analog Devices, Inc. |
| 英文描述： | Precision Zero-Drift Operational Amplifier with Internal Capacitors; Package: SO; No of Pins: 8; Temperature Range: 0°C to +70°C |
| 中文描述： | 3伏/ 5伏1毫瓦2-/3-Channel 16位Σ-Δ模數轉換器（264.12十一） |
| 文件頁數： | 26/32頁 |
| 文件大小： | 264K |
| 代理商： | AD7705EB |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁當前第26頁第27頁第28頁第29頁第30頁第31頁第32頁
AD7705/AD7706
–26–
REV. A
MICROCOMPUTER/MICROPROCESSOR INTERFACING
The AD7705/AD7706’s flexible serial interface allows for easy
interface to most microcomputers and microprocessors. The
flowchart of Figure 10 outlines the sequence that should be
followed when interfacing a microcontroller or microprocessor
to the AD7705/AD7706. Figures 19, 20 and 21 show some
typical interface circuits.
The serial interface on the AD7705/AD7706 is capable of oper-
ating from just three wires and is compatible with SPI interface
protocols. The three-wire operation makes the part ideal for
isolated systems where minimizing the number of interface lines
minimizes the number of opto-isolators required in the system.
The serial clock input is a Schmitt triggered input to accommo-
date slow edges from opto-couplers. The rise and fall times of
other digital inputs to the AD7705/AD7706 should be no longer
than 1
μ
s.
Most of the registers on the AD7705/AD7706 are 8-bit regis-
ters, which facilitates easy interfacing to the 8-bit serial ports of
microcontrollers. The Data Register on the AD7705/AD7706 is
16bits, and the offset and gain registers are 24-bit registers but
data transfers to these registers can consist of multiple 8-bit
transfers to the serial port of the microcontroller. DSP proces-
sors and microprocessors generally transfer 16 bits of data in a
serial data operation. Some of these processors, such as the
ADSP-2105, have the facility to program the amount of cycles
in a serial transfer. This allows the user to tailor the number of
bits in any transfer to match the register length of the required
register in the AD7705/AD7706.
Even though some of the registers on the AD7705/AD7706 are
only eight bits in length, communicating with two of these regis-
ters in successive write operations can be handled as a single 16-
bit data transfer if required. For example, if the Setup Register
is to be updated, the processor must first write to the Communi-
cations Register (saying that the next operation is a write to the
Setup Register) and then write eight bits to the Setup Register.
If required, this can all be done in a single 16-bit transfer be-
cause once the eight serial clocks of the write operation to the
Communications Register have been completed, the part imme-
diately sets itself up for a write operation to the Setup Register.
AD7705/AD7706 to 68HC11 Interface
Figure 19 shows an interface between the AD7705/AD7706 and
the 68HC11 microcontroller. The diagram shows the minimum
(three-wire) interface with
CS
on the AD7705/AD7706 hard-
wired low. In this scheme, the
DRDY
bit of the Communica-
tions Register is monitored to determine when the Data Register
is updated. An alternative scheme, which increases the number
of interface lines to four, is to monitor the
DRDY
output line
from the AD7705/AD7706. The monitoring of the
DRDY
line
can be done in two ways. First,
DRDY
can be connected to one
of the 68HC11’s port bits (such as PC0), which is configured as
an input. This port bit is then polled to determine the status of
DRDY
. The second scheme is to use an interrupt driven system,
in which case the
DRDY
output is connected to the
IRQ
input
of the 68HC11. For interfaces that require control of the
CS
input on the AD7705/AD7706, one of the port bits of the
68HC11 (such as PC1), which is configured as an output, can
be used to drive the
CS
input.
SS
SCK
MISO
MOSI
68HC11
RESET
SCLK
DATA OUT
DATA IN
CS
AD7705/AD7706
V
DD
V
DD
Figure 19. AD7705/AD7706 to 68HC11 Interface
The 68HC11 is configured in the master mode with its CPOL
bit set to a logic one and its CPHA bit set to a logic one. When
the 68HC11 is configured like this, its SCLK line idles high
between data transfers. The AD7705/AD7706 is not capable of
full duplex operation. If the AD7705/AD7706 is configured for
a write operation, no data appears on the DATA OUT lines
even when the SCLK input is active. Similarly, if the AD7705/
AD7706 is configured for a read operation, data presented to
the part on the DATA IN line is ignored even when SCLK is
active.
Coding for an interface between the 68HC11 and the AD7705/
AD7706 is given in Table XV. In this example, the
DRDY
output line of the AD7705/AD7706 is connected to the PC0 port
bit of the 68HC11 and is polled to determine its status.
P3.0
P3.1
8XC51
RESET
SCLK
DATA OUT
DATA IN
CS
AD7705/AD7706
V
DD
V
DD
Figure 20. AD7705/AD7706 to 8XC51 Interface
AD7705/AD7706 to 8051 Interface
An interface circuit between the AD7705/AD7706 and the
8XC51 microcontroller is shown in Figure 20. The diagram
shows the minimum number of interface connections with
CS
on the AD7705/AD7706 hard-wired low. In the case of the
8XC51 interface the minimum number of interconnects is just
two. In this scheme, the
DRDY
bit of the Communications
Register is monitored to determine when the Data Register is
updated. The alternative scheme, which increases the number of
相關PDF資料 |
PDF描述 |
|---|---|
| AD7706* | 3 V/5 V. 1 mW 2-/3-Channel 16-Bit. Sigma-Delta ADCs |
| AD7706EB | High Performance Switched Capacitor Universal Filter; Package: PDIP; No of Pins: 14; Temperature Range: 0°C to +70°C |
| AD7706(中文) | 3 V/5 V, 1 Mw 2-/3-Channel 16-Bit, Sigma-Delta ADCs(三輸入通道16位A/D轉換器) |
| AD7705(中文) | 3 V/5 V, 1 Mw 2-/3-Channel 16-Bit, Sigma-Delta ADCs(完全差分輸入通道16位A/D轉換器) |
| AD7707BR | 3 V/5 V, +-10 V Input Range, 1 mW 3-Channel 16-Bit, Sigma-Delta ADC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7706 | 制造商:AD 制造商全稱:Analog Devices 功能描述:3 V/5 V, 1 mW 2-/3-Channel 16-Bit, Sigma-Delta ADCs |
| AD7706BN | 功能描述:IC ADC 16BIT 3CH 16-DIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:12 采樣率（每秒）:3M 數據接口:- 轉換器數目:- 功率耗散（最大）:- 電壓電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-23-6 包裝:帶卷 (TR) 輸入數目和類型:- |
| AD7706BNZ | 功能描述:IC ADC 16BIT 3CHAN 16DIP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
| AD7706BNZ1 | 制造商:AD 制造商全稱:Analog Devices 功能描述:3 V/5 V, 1 mW, 2-/3-Channel, 16-Bit, Sigma-Delta ADCs |
發布緊急采購，3分鐘左右您將得到回復。