- 您現在的位置：買賣IC網 > PDF目錄373918 > AD7825BN (ANALOG DEVICES INC) 3 V/5 V, 2 MSPS, 8-Bit, 1-, 4-, 8-Channel Sampling ADCs PDF資料下載
參數資料
| 型號： | AD7825BN |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | ADC |
| 英文描述： | 3 V/5 V, 2 MSPS, 8-Bit, 1-, 4-, 8-Channel Sampling ADCs |
| 中文描述： | 4-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDIP24 |
| 封裝： | 0.300 INCH, PLASTIC, MS-001AF, DIP-24 |
| 文件頁數： | 14/18頁 |
| 文件大小： | 215K |
| 代理商： | AD7825BN |
AD7822/AD7825/AD7829
–14–
REV. A
MICROPROCESSOR INTERFACING
The parallel port on the AD7822/AD7825/AD7829 allows the
ADCs to be interfaced to a range of many different micro-
controllers. This section explains how to interface the AD7822,
AD7825, and AD7829 with some of the more common micro-
controller parallel interface protocols.
AD7822/AD7825/AD7829 to 8051
Figure 23 below shows a parallel interface between the AD7822,
AD7825, and AD7829 and the 8051 microcontroller. The
EOC
signal on the AD7822, AD7825, and AD7829 provides an inter-
rupt request to the 8051 when a conversion ends and data is
ready. Port 0 of the 8051 may serve as an input or output port,
or as in this case when used together, may be used as a bidirec-
tional low order address and data bus. The address latch enable
output of the 8051 is used to latch the low byte of the address
during accesses to the device, while the high order address byte
is supplied from Port 2. Port 2 latches remain stable when the
AD7822, AD7825, and AD7829 are addressed, as they do not
have to be turned around (set to 1) for data input as is the case for
Port 0.
AD0-AD7
ALE
A8-A15
RD
INT
8051*
LATCH
DECODER
DB0-DB7
RD
EOC
CS
*ADDITIONAL PINS OMITTED FOR CLARITY
AD7822/
AD7825/
AD7829*
Figure 23. Interfacing to the 8051
AD7822/AD7825/AD7829 to PIC16C6x/7x
Figure 24 shows a parallel interface between the AD7822,
AD7825, and AD7829 and the PIC16C64/65/74. The
EOC
signal on the AD7822, AD7825, and AD7829 provides an
interrupt request to the microcontroller when a conversion
begins. Of the PIC16C6x/7x range of microcontrollers only
the PIC16C64/65/74 can provide the option of a parallel slave
port. Port D of the microcontroller will operate as an 8-bit wide
parallel slave port when control bit PSPMODE in the TRISE
register is set. Setting PSPMODE enables the port pin RE0 to
be the
RD
output and RE2 to be the
CS
(chip select) output.
For this functionality, the corresponding data direction bits
of the TRISE register must be configured as outputs (reset to
0). See PIC16/17 Microcontroller User Manual.
PSP0-PSP7
RD
INT
PIC16C6x/7x*
DB0-DB7
RD
EOC
CS
*ADDITIONAL PINS OMITTED FOR CLARITY
CS
AD7822/
AD7825/
AD7829*
Figure 24. Interfacing to the PIC16C6x/7x
AD7822/AD7825/AD7829 to ADSP-21xx
Figure 25 below shows a parallel interface between the AD7822,
AD7825, and AD7829 and the ADSP-21xx series of DSPs. As
before, the
EOC
signal on the AD7822, AD7825, and AD7829
provides an interrupt request to the DSP when a conversion
ends.
D7-D0
RD
IRQ
ADSP-21xx*
DB0-DB7
RD
EOC
CS
*ADDITIONAL PINS OMITTED FOR CLARITY
DMS
EN
ADDRESS
DECODE
LOGIC
A13-A0
AD7822/
AD7825/
AD7829*
Figure 25. Interfacing to the ADSP-21xx
相關PDF資料 |
PDF描述 |
|---|---|
| AD7825BR | 3 V/5 V, 2 MSPS, 8-Bit, 1-, 4-, 8-Channel Sampling ADCs |
| AD7825BRU | 14-Bit 48KSPS DAS with ADC, MUX, PGA and Internal Reference 28-SSOP -40 to 85 |
| AD7822BN | 3 V/5 V, 2 MSPS, 8-Bit, 1-, 4-, 8-Channel Sampling ADCs |
| AD7822BR | 3 V/5 V, 2 MSPS, 8-Bit, 1-, 4-, 8-Channel Sampling ADCs |
| AD7822BRU | 3 V/5 V, 2 MSPS, 8-Bit, 1-, 4-, 8-Channel Sampling ADCs |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7825BNZ | 制造商:Analog Devices 功能描述:ADC Single Semiflash 2Msps 8-bit Parallel 24-Pin PDIP 制造商:Analog Devices 功能描述:IC 8BIT ADC 7825 DIP24 |
| AD7825BNZ | 制造商:Analog Devices 功能描述:IC |
| AD7825BNZ1 | 制造商:AD 制造商全稱:Analog Devices 功能描述:3 V/5 V, 2 MSPS, 8-Bit, 1-/4-/8-Channel Sampling ADCs |
| AD7825BR | 制造商:Analog Devices 功能描述:ADC Single Semiflash 2Msps 8-bit Parallel 24-Pin SOIC W 制造商:Analog Devices 功能描述:IC 8-BIT ADC |
| AD7825BR-REEL | 制造商:Analog Devices 功能描述:ADC Single Semiflash 2Msps 8-bit Parallel 24-Pin SOIC W T/R |
發布緊急采購，3分鐘左右您將得到回復。