- 您現在的位置：買賣IC網 > PDF目錄373918 > AD7829BRU (ANALOG DEVICES INC) 2.35V-5.25V, 12 bit, 1MSPS, Serial ADC 6-SC70 -40 to 125 PDF資料下載
參數資料
| 型號： | AD7829BRU |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | ADC |
| 英文描述： | 2.35V-5.25V, 12 bit, 1MSPS, Serial ADC 6-SC70 -40 to 125 |
| 中文描述： | 8-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDSO28 |
| 封裝： | MO-153AE, TSSOP-28 |
| 文件頁數： | 12/18頁 |
| 文件大小： | 215K |
| 代理商： | AD7829BRU |
AD7822/AD7825/AD7829
–12–
REV. A
OPERATING MODES
The AD7822, AD7825, and AD7829 have two possible modes
of operation, depending on the state of the
CONVST
pulse
approximately 100 ns after the end of a conversion, i.e., upon
the rising edge of the
EOC
pulse.
Mode 1 Operation (High Speed Sampling)
When the AD7822, AD7825, and AD7829 are operated in
Mode 1 they are not powered-down between conversions. This
mode of operation allows high throughput rates to be achieved.
Figure 20 shows how this optimum throughput rate is achieved
by bringing
CONVST
high before the end of a conversion, i.e.,
before the
EOC
pulses low. When operating in this mode a new
conversion should not be initiated until 30 ns after the end of a
read operation. This is to allow the track/hold to acquire the
analog signal to 0.5 LSB accuracy.
Mode 2 Operation (Automatic Power-Down)
When the AD7822, AD7825, and AD7829 are operated in
Mode 2 (see Figure 21), they automatically power down at the
end of a conversion. The
CONVST
signal is brought low to ini-
tiate a conversion and is left logic low until after the
EOC
goes
high, i.e., approximately 100 ns after the end of the conversion.
The state of the
CONVST
signal is sampled at this point (i.e.,
530 ns maximum after
CONVST
falling edge) and the AD7822,
AD7825, and AD7829 will power down as long as
CONVST
is low. The ADC is powered up again on the rising edge of the
CONVST
signal. Superior power performance can be achieved
in this mode of operation by only powering up the AD7822,
AD7825, and AD7829 to carry out a conversion. The parallel
interface of the AD7822, AD7825, and AD7829 is still fully
operational while the ADCs are powered down. A read may occur
while the part is powered down, and so it does not necessarily
need to be placed within the
EOC
pulse as shown in Figure 21.
t
2
t
1
t
3
VALID
DATA
CONVST
EOC
CS
RD
DB0-DB7
TRACK
HOLD
TRACK
HOLD
120ns
Figure 20. Mode 1 Operation
CONVST
EOC
CS
RD
DB0-DB7
t
POWER-UP
t
1
VALID
DATA
POWER
DOWN
HERE
Figure 21. Mode 2 Operation
相關PDF資料 |
PDF描述 |
|---|---|
| AD7827 | 3 V/5 V, 1 MSPS, 8-Bit, Serial Interface Sampling ADC |
| AD7827BN | 14-Bit 48KSPS DAS with ADC, MUX, PGA and Internal Reference 28-SSOP -40 to 85 |
| AD7827BR | 3 V/5 V, 1 MSPS, 8-Bit, Serial Interface Sampling ADC |
| AD7828UE | LC2MOS High Speed 4- & 8-Channel 8-Bit ADCs |
| AD7828CQ | LC2MOS High Speed 4- & 8-Channel 8-Bit ADCs |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7829BRU-1 | 制造商:Analog Devices 功能描述:ADC Single Semiflash 2Msps 8-bit Parallel 28-Pin TSSOP |
| AD7829BRU-1REEL7 | 制造商:Analog Devices 功能描述:ADC Single Semiflash 2Msps 8-bit Parallel 28-Pin TSSOP T/R 制造商:Analog Devices 功能描述:ADC SGL SEMIFLASH 2MSPS 8BIT PARALLEL 28TSSOP - Tape and Reel |
| AD7829BRU-REEL | 功能描述:IC ADC 8BIT 8CH 2MSPS 28TSSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 位數:12 采樣率（每秒）:3M 數據接口:- 轉換器數目:- 功率耗散（最大）:- 電壓電源:- 工作溫度:- 安裝類型:表面貼裝 封裝/外殼:SOT-23-6 供應商設備封裝:SOT-23-6 包裝:帶卷 (TR) 輸入數目和類型:- |
| AD7829BRU-REEL7 | 功能描述:IC ADC 8BIT 8CH 2MSPS 28TSSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:16 采樣率（每秒）:45k 數據接口:串行 轉換器數目:2 功率耗散（最大）:315mW 電壓電源:模擬和數字 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SOIC（0.295"，7.50mm 寬） 供應商設備封裝:28-SOIC W 包裝:帶卷 (TR) 輸入數目和類型:2 個單端，單極 |
| AD7829BRUZ | 功能描述:IC ADC 8BIT 8CH 2MSPS 28TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
發布緊急采購，3分鐘左右您將得到回復。