- 您現在的位置：買賣IC網 > PDF目錄373925 > AD7908BRU-REEL7 (ANALOG DEVICES INC) 8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP PDF資料下載
參數資料
| 型號： | AD7908BRU-REEL7 |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | ADC |
| 英文描述： | 8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP |
| 中文描述： | 8-CH 8-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO20 |
| 封裝： | MO-153AC, TSSOP-20 |
| 文件頁數： | 13/24頁 |
| 文件大小： | 607K |
| 代理商： | AD7908BRU-REEL7 |
AD7908/AD7918/AD7928
REV. A
Table I. Control Register Bit Functions
MSB
LSB
WRITE
SEQ
DONTC
ADD2
ADD1
ADD0
PM1
PM0
SHADOW
DONTC
RANGE
CODING
Bit
Mnemonic
Comment
11
WRITE
The value written to this bit of the Control Register determines whether or not the following 11 bits will be
loaded to the Control Register. If this bit is a 1, the following 11 bits will be written to the Control Register; if it is a
0, the remaining 11 bits are not loaded to the Control Register, and it remains unchanged.
The SEQ bit in the Control Register is used in conjunction with the SHADOW bit to control the use of the
sequencer function and access the SHADOW Register. (See Table IV.)
10
SEQ
9
8
–
6
DONTCARE
ADD2
–
ADD0
These three address bits are loaded at the end of the present conversion sequence and select which analog
input channel is to be converted in the next serial transfer, or they may select the final channel in a consecutive
sequence as described in Table IV. The selected input channel is decoded as shown in Table II. The
address bits corresponding to the conversion result are also output on DOUT prior to the 12 bits of data,
see the Serial Interface section. The next channel to be converted on will be selected by the mux on the
14th SCLK falling edge.
Power Management Bits. These two bits decode the mode of operation of the AD7908/AD7918/AD7928
as shown in Table III.
The SHADOW bit in the Control Register is used in conjunction with the SEQ bit to control the use of the
sequencer function and access the SHADOW Register. (See Table IV.)
5, 4
PM1, PM0
3
SHADOW
2
1
DONTCARE
RANGE
This bit selects the analog input range to be used on the AD7908/AD7918/AD7928. If it is set to 0, the
analog input range will extend from 0 V to 2 REF
IN
. If it is set to 1, the analog input range will extend from
0 V to REF
IN
(for the next conversion). For 0 V to 2 REF
IN
, AV
DD
= 4.75 V to 5.25 V.
This bit selects the type of output coding the AD7908/AD7918/AD7928 will use for the conversion result.
If this bit is set to 0, the output coding for the part will be twos complement. If this bit is set to 1, the output
coding from the part will be straight binary (for the next conversion).
0
CODING
CONTROL REGISTER
The Control Register on the AD7908/AD7918/AD7928 is a 12-bit, write-only register. Data is loaded from the DIN pin of the
AD7908/AD7918/AD7928 on the falling edge of SCLK. The data is transferred on the DIN line at the same time that the conver-
sion result is read from the part. The data transferred on the DIN line corresponds to the AD7908/AD7918/AD7928 configuration
for the next conversion. This requires 16 serial clocks for every data transfer. Only the information provided on the first 12 falling
clock edges (after
CS
falling edge) is loaded to the Control Register. MSB denotes the first bit in the data stream. The bit functions
are outlined in Table I.
CODE
1.0
0
4096
I
0
–0.4
–0.8
–1.0
0.2
–0.2
–0.6
2048
0.6
AV
= V
= 5V
TEMP = 25 C
0.4
0.8
2560
3072
3584
512
1024
1536
TPC 6. AD7928 Typical INL
CODE
1.0
0
4096
D
0
–0.4
–0.8
–1.0
0.2
–0.2
–0.6
2048
0.6
0.4
0.8
2560
3072
3584
512
1024
1536
AV
= V
= 5V
TEMP = 25 C
TPC 7. AD7928 Typical DNL
–13–
相關PDF資料 |
PDF描述 |
|---|---|
| AD7918 | 8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP |
| AD7918BRU | 8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP |
| AD7918BRU-REEL | 8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP |
| AD7918BRU-REEL7 | 8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP |
| AD7928 | 8-Channel, 1 MSPS, 8-/10-/12-Bit ADCs with Sequencer in 20-Lead TSSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7908BRUZ | 功能描述:IC ADC 8BIT 8CH 1MSPS 20-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1 系列:microPOWER™ 位數:8 采樣率（每秒）:1M 數據接口:串行，SPI? 轉換器數目:1 功率耗散（最大）:- 電壓電源:模擬和數字 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:24-VFQFN 裸露焊盤 供應商設備封裝:24-VQFN 裸露焊盤（4x4） 包裝:Digi-Reel® 輸入數目和類型:8 個單端，單極 產品目錄頁面:892 (CN2011-ZH PDF) 其它名稱:296-25851-6 |
| AD7908BRUZ | 制造商:Analog Devices 功能描述:IC 8BIT ADC SMD 7908 TSSOP20 |
| AD7908BRUZ-REEL | 功能描述:IC ADC 8BIT 8CH W/SEQ 20TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| AD7908BRUZ-REEL7 | 功能描述:IC ADC 8BIT 8CH W/SEQ 20TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
| AD7908WYRUZ-REEL7 | 功能描述:IC ADC 8BIT 8CH 1MSPS 20-TSSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:2,500 系列:- 位數:16 采樣率（每秒）:15 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:1 功率耗散（最大）:480µW 電壓電源:單電源 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:38-WFQFN 裸露焊盤 供應商設備封裝:38-QFN（5x7） 包裝:帶卷 (TR) 輸入數目和類型:16 個單端，雙極；8 個差分，雙極 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
發布緊急采購，3分鐘左右您將得到回復。