- 您現在的位置：買賣IC網 > PDF目錄373927 > AD7945ARS-B (ANALOG DEVICES INC) +3.3 V/+5 V Multiplying 12-Bit DACs PDF資料下載
參數資料
| 型號： | AD7945ARS-B |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | DAC |
| 英文描述： | +3.3 V/+5 V Multiplying 12-Bit DACs |
| 中文描述： | PARALLEL, WORD INPUT LOADING, 5 us SETTLING TIME, 12-BIT DAC, PDSO20 |
| 封裝： | SSOP-20 |
| 文件頁數： | 15/16頁 |
| 文件大小： | 329K |
| 代理商： | AD7945ARS-B |
AD7943/AD7945/AD7948
REV. B
–15–
MICROPROCESSOR INTERFACING
AD7943 to ADSP-2101 Interface
Figure 17 shows the AD7943 to ADSP-2101 interface diagram.
The DSP is set up for alternate inverted framing with an inter-
nally generated SCLK. TFS from the ADSP-2101 drives the
STB1 input on the AD7943. The serial word length should be
set at 12. This is done by making SLEN = 11 (1011 binary).
The SLEN field is Bits 3–0 in the SPORT control register
(0x3FF6 for SPORT0 and 0x3FF2 for SPORT1).
With the 16 MHz version of the ADSP-2101, the maximum
output SCLK is 8 MHz. The AD7943 setup and hold time of
10 ns and 25 ns mean that it is compatible with the DSP when
running at this speed.
The OUTPUT FLAG drives both
LD1
and
LD2
and is brought
low to update the DAC register and change the analog output.
ADSP-2101
AD7943
STB4
STB2
+5V
TFS
SCLK
DT
OUTPUT FLAG
CLR
STB3
LD1
LD2
STB1
SRI
Figure 17. AD7943 to ADSP-2101 Interface
AD7943 to DSP56001 Interface
Figure 18 shows the interface diagram for the AD7943 to the
DSP56001. The DSP56001 is configured for normal mode
synchronous operation with gated clock. The serial clock, SCK,
is set up as an output from the DSP and the serial word length
is set for 12 bits (WL0 = 1, WL1 = 0, in Control Register A).
SCK from the DSP56001 is applied to the AD7943
STB3
in-
put. Data from the DSP56000 is valid on the falling edge of
SCK and this is the edge which clocks the data into the AD7943
shift register. STB1, STB2 and STB4 are tied low on the
AD7943 to permanently enable the
STB3
input.
When the 12-bit serial word has been written to the AD7943,
the
LD1
,
LD2
inputs are brought low to update the DAC
register.
DSP56001
AD7943
STB4
STB2
STB1
+5V
SCK
STD
OUTPUT FLAG
CLR
STB3
LD1
LD2
SRI
Figure 18. AD7943 to DSP56001 Interface
AD7945 to MC68000 Interface
Figure 19 shows the MC68000 interface to the AD7945. The
appropriate data is written into the DAC in one MOVE instruc-
tion to the appropriate memory location.
MC68000
ADDRESS
DECODE
AD7945
CS
WR
DB11 – DB0
A1 – A23
AS
DTACK
R/
W
D15 – D0
Figure 19. AD7945 to MC68000 Interface
AD7948 to Z80 Interface
Figure 20 is the interface between the AD7948 and the 8-bit
bus of the Z80 processor. Three write operations are needed to
load the DAC. The first two load the MS byte and the LS byte
and the third brings the
LDAC
low to update the output.
Z80
ADDRESS
DECODE
AD7948
CSMSB
CSLSB
LDAC
WR
DB7 – DB0
A0 – A15
MREQ
WR
D7 – D0
ADDRESS BUS
DATA BUS
Figure 20. AD7948 to Z80 Interface
相關PDF資料 |
PDF描述 |
|---|---|
| AD7948ARS-B | +3.3 V/+5 V Multiplying 12-Bit DACs |
| AD7943 | +3.3 V/+5 V Multiplying 12-Bit DACs(12位乘法D/A轉換器) |
| AD7945 | +3.3 V/+5 V Multiplying 12-Bit DACs(12位乘法D/A轉換器) |
| AD7992 | 2-Channel, 12-Bit ADC with I2C Compatible Interface in 10-Lead MSOP |
| AD7992BRM-0 | 2-Channel, 12-Bit ADC with I2C Compatible Interface in 10-Lead MSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7945ARS-BREEL | 功能描述:IC DAC 12BIT MULT PARALL 20-SSOP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:LTC263x 12-, 10-, and 8-Bit VOUT DAC Family 特色產品:LTC2636 - Octal 12-/10-/8-Bit SPI VOUT DACs with 10ppm/°C Reference 標準包裝:91 系列:- 設置時間:4µs 位數:10 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:8 電壓電源:單電源 功率耗散（最大）:2.7mW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-WFDFN 裸露焊盤 供應商設備封裝:14-DFN-EP（4x3） 包裝:管件 輸出數目和類型:8 電壓，單極 采樣率（每秒）:* |
| AD7945ARSZ-B | 功能描述:IC DAC 12BIT MULT PARALL 20SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:1 系列:- 設置時間:4.5µs 位數:12 數據接口:串行，SPI? 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:- 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:8-SOICN 包裝:剪切帶 (CT) 輸出數目和類型:1 電壓，單極；1 電壓，雙極 采樣率（每秒）:* 其它名稱:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND |
| AD7945ARSZ-BREEL | 功能描述:IC DAC 12BIT MULT PARALL 20SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 產品培訓模塊:LTC263x 12-, 10-, and 8-Bit VOUT DAC Family 特色產品:LTC2636 - Octal 12-/10-/8-Bit SPI VOUT DACs with 10ppm/°C Reference 標準包裝:91 系列:- 設置時間:4µs 位數:10 數據接口:MICROWIRE?，串行，SPI? 轉換器數目:8 電壓電源:單電源 功率耗散（最大）:2.7mW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-WFDFN 裸露焊盤 供應商設備封裝:14-DFN-EP（4x3） 包裝:管件 輸出數目和類型:8 電壓，單極 采樣率（每秒）:* |
| AD7945BCHIPS | 功能描述:12 Bit Digital to Analog Converter 1 Die 制造商:analog devices inc. 系列:- 包裝:- 零件狀態:上次購買時間 位數:12 數模轉換器數:1 建立時間:600μs（標準） 輸出類型:Current - Unbuffered 差分輸出:無 數據接口:并聯 參考類型:外部 電壓 - 電源，模擬:5V 電壓 - 電源，數字:5V INL/DNL（LSB）:±0.5（最大），±0.5（最大） 架構:R-2R 工作溫度:-40°C ~ 85°C 封裝/外殼:模具 供應商器件封裝:模具 標準包裝:1 |
| AD7945BN | 功能描述:IC DAC 12BIT MULT PARALL 20-DIP RoHS:否 類別:集成電路 (IC) >> 數據采集 - 數模轉換器 系列:- 標準包裝:47 系列:- 設置時間:2µs 位數:14 數據接口:并聯 轉換器數目:1 電壓電源:單電源 功率耗散（最大）:55µW 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP（0.209"，5.30mm 寬） 供應商設備封裝:28-SSOP 包裝:管件 輸出數目和類型:1 電流，單極；1 電流，雙極 采樣率（每秒）:* |
發布緊急采購，3分鐘左右您將得到回復。