- 您現在的位置：買賣IC網 > PDF目錄373938 > AD8133 (Analog Devices, Inc.) Triple Differential Driver With Output Pull-Down PDF資料下載
參數資料
| 型號： | AD8133 |
| 廠商： | Analog Devices, Inc. |
| 元件分類： | 運動控制電子 |
| 英文描述： | Triple Differential Driver With Output Pull-Down |
| 中文描述： | 具有輸出下拉的三路差分驅動器 |
| 文件頁數： | 15/16頁 |
| 文件大小： | 479K |
| 代理商： | AD8133 |
AD8133
OUTPUT PULL-DOWN
The output pull-down feature, when used in conjunction with
series Schottky diodes, offers a convenient means to connect a
number of AD8133 outputs together to form a video network.
The OPD pin is a binary input that controls the state of the
AD8133 outputs. Its binary input level is referenced to the most
positive power supply (see the Specifications tables for the logic
levels). When the OPD input is driven to its low state, the
AD8133 output is enabled and operates in its normal fashion. In
this state, the V
OCM
input can be used to provide a positive bias
on the series diodes, allowing the AD8133 to transmit signals
over the network. When the OPD input is driven to its high
state, the outputs of the AD8133 are forced to a low voltage,
irrespective of the level on the V
OCM
input, reverse-biasing the
series diodes and thus presenting high impedance to the net-
work. This feature allows a three-state output to be realized that
maintains its high impedance state even when the AD8133 is
not powered. This condition can occur in KVM networks where
the AD8133s do not all reside in the same module, and some
modules in the network are not powered.
Rev. 0 | Page 15 of 16
It is recommended that the output pull-down feature only be
used in conjunction with series diodes in such a way as to
ensure that the diodes are reverse-biased when the output pull-
down feature is asserted, since some loading conditions can
prevent the output voltage from being pulled all the way down.
KVM NETWORKS
In daisy-chained KVM networks, the drivers are distributed
along one cable and a triple receiver is located at one end.
Schottky diodes in series with the driver outputs are biased such
that the one driver that is transmitting video signals has its
diodes forward-biased and the disabled drivers have their
diodes reverse-biased. The output common-mode voltage, set
by the V
OCM
input, supplies the forward-biased voltage. When
the output pull-down feature is asserted, the differential outputs
are pulled to a low voltage, reverse-biasing the diodes.
In star networks, all cables radiate out from a central hub,
which contains a triple receiver. The series diodes are all located
at the receiver in the star network. Only one ray of the star is
transmitting at a given time, and all others are isolated by the
reverse-biased diodes. Diode biasing is controlled in the same
way as in the daisy-chained network.
In the daisy-chained and star networks that use diodes for isola-
tion, return paths are required for the common-mode currents
that flow through the series diodes. A common-mode tap can
be implemented at each receiver by splitting the100 termina-
tion resistor into two 50 resistors in series. The diode currents
are routed from the tap between the 50 resistors back to the
respective transmitters over one of the wires of the fourth
twisted pair in the UTP cable. Series resistors in the common-mode
return path are generally required to set the desired diode current.
In point-to-point networks, there is one transmitter and one
receiver per cable, and the switching is generally implemented
with a crosspoint switch. In this case, there is no need to use
diodes or the output pull-down feature.
Diode and crosspoint switching are by no means the only type
of switching that can be used with the AD8133. Many other
types of mechanical, electromechanical, and electronic switches
can be used.
LAYOUT AND POWER SUPPLY DECOUPLING
CONSIDERATIONS
Standard high speed PCB layout practices should be adhered to
when designing with the AD8133. A solid ground plane is
recommended and good wideband power supply decoupling
networks should be placed as close as possible to the supply
pins. Small surface-mount ceramic capacitors are recommended
for these networks, and tantalum capacitors are recommended
for bulk supply decoupling.
AMPLIFIER-TO-AMPLIFIER ISOLATION
The least amount of isolation between the three amplifiers
exists between Amplifier A and Amplifier B. This is therefore
viewed as the worst-case isolation and is what is reflected in the
Specifications tables and Typical Performance Characteristics.
Refer to the Basic Test Circuit shown in Figure 5 for the test
conditions.
EXPOSED PADDLE (EP)
The LFCSP-24 package has an exposed paddle on the underside
of its body. In order to achieve the specified thermal resistance,
it must have a good thermal connection to one of the PCB
planes. The exposed paddle must be soldered to a pad on the
top of the board that is connected to an inner plane with several
thermal vias.
相關PDF資料 |
PDF描述 |
|---|---|
| AD8133ACP-REEL | Triple Differential Driver With Output Pull-Down |
| AD8133ACP-REEL7 | Triple Differential Driver With Output Pull-Down |
| AD8133ACPZ-REEL | Triple Differential Driver With Output Pull-Down |
| AD8133ACPZ-REEL7 | Triple Differential Driver With Output Pull-Down |
| AD8137 | Low Cost, Low Power 12-Bit Differential ADC Driver |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD8133ACP-R2 | 制造商:Rochester Electronics LLC 功能描述:TRIPLE DIFFEREN. DRIVER W/OUTPUT DISABLE - Bulk 制造商:Analog Devices 功能描述: |
| AD8133ACP-REEL | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD8133ACP-REEL7 | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD8133ACPZ-R2 | 制造商:Analog Devices 功能描述:SP Amp DIFF Line Driver Amp Triple ±6V/12V 24-Pin LFCSP EP T/R 制造商:Analog Devices 功能描述:SP AMP DIFF LINE DRVR AMP TRIPLE 6V/12V 24LFCSP EP - Tape and Reel 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| AD8133ACPZ-REEL | 功能描述:IC OPAMP DIFF TRPL LDIST 24LFCSP RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:100 系列:- 放大器類型:通用 電路數:1 輸出類型:- 轉換速率:0.2 V/µs 增益帶寬積:- -3db帶寬:- 電流 - 輸入偏壓:100pA 電壓 - 輸入偏移:30µV 電流 - 電源:380µA 電流 - 輸出 / 通道:- 電壓 - 電源，單路/雙路(±):±2 V ~ 18 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:8-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:8-SO 包裝:管件 |
發布緊急采購，3分鐘左右您將得到回復。