- 您現在的位置：買賣IC網 > PDF目錄77007 > AD9011-20-41 0 MHz - 8000 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 0.6 dB INSERTION LOSS-MAX PDF資料下載
參數資料
| 型號： | AD9011-20-41 |
| 元件分類： | 衰減器 |
| 英文描述： | 0 MHz - 8000 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 0.6 dB INSERTION LOSS-MAX |
| 文件頁數： | 1/3頁 |
| 文件大小： | 188K |
| 代理商： | AD9011-20-41 |
71
5305 Spectrum Drive, Frederick, MD 21703-7362
TEL: 301-846-9222, 800-638-2048
Fax: 301-846-9116
web: www.aeroflex-weinschel.com
email: weinschel-sales@aeroflex.com
Revision Date: 11/28/07
Variable Attenuators
Models 9003, 9004, 9009, 9010 & 9011 dc to 18.0 GHz
Manual Step Attenuators
2 Watt
Ruggedized SMA Connector
Features
o Broadband - Available in a choice of frequency ranges:
dc to 4, dc to 8, dc to 12.4 and dc to 18 GHz.
o Available Express Models:
AC-9003-69-31
AF-9003-9-12
AF-9003-69-31
Other models may be available for Express delivery.
o Wide Choice of Attenuation Ranges - A choice of five
standard attenuation ranges is available: 0 to 9.0, 0 to
69 and 0 to 99 dB in 1 dB steps, and 0 to 60 and 0 to
90 dB in 10 dB steps.
o Environmental - Designed to meet most environmen-
tal requirements of MIL-A-24215 (Vibration, Shock,
Relative Humidity to 95% and Altitude).
o In-line Configuration - Passivated stainless steel SMA
connector are set parallel with control shaft (except
units with right angle connector) to reduce volume for
applications where space is critical. All models are bidi-
rectional.
o Precise Incremental Attenuation Accuracy - Model
9000 series has flat frequency response and small
deviation from nominal attenuation at all settings (e.g.,
deviation is only +2.5 dB at 99 dB setting at 18 GHz).
o Excellent Repeatability and Long Switch Life.
o Custom Configurations Available Upon Request.
o Highly Accurate Detent Stepping - Direct drive of
attenuator drums eliminates gears and provides for
excellent repeatability.
o Safety Mechanical Stop - A mechanical stop between
maximum and 0 attenuation positions on all models
except 0-9 dB unit is provided to prevent large power
changes at attenuator output from damaging sensitive
equipment.
Description
The Model 9000 series Step Attenuators are broadband
miniature step attenuators that provide excellent perfor-
mance characteristics suitable for use in high reliability 50
ohm systems and applications requiring extra-small compo-
nents for the precision control of signal levels. The Model
9000 series can be used either as input or output attenua-
tors in signal sources, receivers, field strength meters,
spectrum analyzers, etc.
The SMA connector furnished on all models are available in
either standard or right-angle configuration. The sex of front
and rear connector is optional (refer to connector specifica-
tion for specific combinations available). A knob(s), marked
appropriately, is supplied with each unit.
Specifications
NOMINAL IMPEDANCE: 50
Ω
FREQUENCY RANGE (add Model No. Prefix to
Designate Range):
All Models:
dc to 4.0 GHz (AC)
dc to 18.0 GHz (AF)
Standard Incremental Attenuation Range:
Model 9009:
0 to 9 dB in 1 dB steps
Model 9003:
0 to 69 dB in 1 dB steps
Model 9004:
0 to 99 dB in 1 dB steps
Model 9010:
0 to 60 dB in 10 dB steps
Model 9011:
0 to 90 dB in 10 dB steps
MAXIMUM SWR:
Frequency
9009, 9010
9003
Range (GHz)
9011
9004
dc - 4
1.25
1.35
dc - 18
1.60
1.75
POWER RATING: 2 watts average to 25°C ambient
temperature, derated linearly to 1 watt @ 54°C. 200 watts
peak (5
μsec pulse width; 0.5% duty cycle)
POWER COEFFICIENT: < 0.005dB/dB/watt
TEMPERATURE COEFFICIENT: < 0.0004 dB/dB/°C
TEMPERATURE RANGE:
Operating:
0°C to + 54°C
Nonoperating:
-54°C to +54°C
www.argosysales.com
800-542-4457
EXPRESS
相關PDF資料 |
PDF描述 |
|---|---|
| AD9011-20-42 | 0 MHz - 8000 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 0.6 dB INSERTION LOSS-MAX |
| AD9011-20-44 | 0 MHz - 8000 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 0.6 dB INSERTION LOSS-MAX |
| AD9011-30-11 | 0 MHz - 8000 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 0.6 dB INSERTION LOSS-MAX |
| AD9011-30-12 | 0 MHz - 8000 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 0.6 dB INSERTION LOSS-MAX |
| AD9011-30-13 | 0 MHz - 8000 MHz RF/MICROWAVE VARIABLE ATTENUATOR, 0.6 dB INSERTION LOSS-MAX |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD9011JM | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog-to-Digital Converter， 8-Bit |
| AD9011KM | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog-to-Digital Converter， 8-Bit |
| AD9011SMB | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog-to-Digital Converter， 8-Bit |
| AD9011TMB | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog-to-Digital Converter， 8-Bit |
| AD9012 | 制造商:AD 制造商全稱:Analog Devices 功能描述:High Speed 8-Bit TTL A/D Converter |
發布緊急采購，3分鐘左右您將得到回復。