- 您現在的位置：買賣IC網 > PDF目錄373977 > ADCMP582 (Analog Devices, Inc.) Ultrafast SiGe Voltage Comparators PDF資料下載
參數資料
| 型號： | ADCMP582 |
| 廠商： | Analog Devices, Inc. |
| 英文描述： | Ultrafast SiGe Voltage Comparators |
| 中文描述： | 超高速電壓比較器硅鍺 |
| 文件頁數： | 5/16頁 |
| 文件大?。?/td> | 284K |
| 代理商： | ADCMP582 |
ADCMP580/ADCMP581/ADCMP582
TIMING INFORMATION
Figure 2 shows the ADCMP580/ADCMP581/ADCMP582 compare and latch timing relationships. Table 2 provides the definitions of the
terms shown in the figure.
Rev. 0 | Page 5 of 16
50%
50%
V
N
± V
OS
50%
DIFFERENTIAL
INPUT VOLTAGE
LATCH ENABLE
Q OUTPUT
Q OUTPUT
LATCH ENABLE
t
H
t
PDL
t
PDH
t
PLOH
t
PLOL
t
R
t
F
V
N
V
OD
t
S
t
PL
0
Figure 2. Comparator Timing Diagram
Table 2. Timing Descriptions
Symbol
Timing
t
PDH
Input to Output High Delay
Description
Propagation delay measured from the time the input signal crosses the reference
(± the input offset voltage) to the 50% point of an output low-to-high transition.
Propagation delay measured from the time the input signal crosses the reference
(± the input offset voltage) to the 50% point of an output high-to-low transition.
Propagation delay measured from the 50% point of the latch enable signal
low-to-high transition to the 50% point of an output low-to-high transition.
Propagation delay measured from the 50% point of the latch enable signal
low-to-high transition to the 50% point of an output high-to-low transition.
Minimum time after the negative transition of the latch enable signal that the
input signal must remain unchanged to be acquired and held at the outputs.
Minimum time that the latch enable signal must be high to acquire an input
signal change.
Minimum time before the negative transition of the latch enable signal that an
input signal change must be present to be acquired and held at the outputs.
Amount of time required to transition from a low to a high output as measured
at the 20% and 80% points.
Amount of time required to transition from a high to a low output as measured
at the 20% and 80% points.
Difference between the input voltages V
P
and V
N
for output true.
Difference between the input voltages V
P
and V
N
for output false.
t
PDL
Input to Output Low Delay
t
PLOH
Latch Enable to Output High Delay
t
PLOL
Latch Enable to Output Low Delay
t
H
Minimum Hold Time
t
PL
Minimum Latch Enable Pulse Width
t
S
Minimum Setup Time
t
R
Output Rise Time
t
F
Output Fall Time
V
N
V
OD
Normal Input Voltage
Voltage Overdrive
相關PDF資料 |
PDF描述 |
|---|---|
| ADCMP582BCP-R2 | Ultrafast SiGe Voltage Comparators |
| ADCMP582BCP-RL7 | Ultrafast SiGe Voltage Comparators |
| ADCMP582BCP-WP | Ultrafast SiGe Voltage Comparators |
| ADCMP582BCP | Ultrafast SiGe Voltage Comparator |
| ADCMP580BCP | Ultrafast SiGe Voltage Comparator |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADCMP582BCP | 制造商:Analog Devices 功能描述:COMPARATOR SGL 5.5V 16LFCSP EP - Bulk |
| ADCMP582BCP-R2 | 制造商:Analog Devices 功能描述:Comparator Single ±5.5V 16-Pin LFCSP EP T/R 制造商:Rochester Electronics LLC 功能描述:DUAL SUPPLY, PECL ON XFCB3.0 - Bulk |
| ADCMP582BCP-RL7 | 制造商:Analog Devices 功能描述:Comparator Single ±5.5V 16-Pin LFCSP EP T/R |
| ADCMP582BCP-WP | 制造商:Analog Devices 功能描述:Comparator Single ±5.5V 16-Pin LFCSP EP 制造商:Analog Devices 功能描述:IC SEMICONDUCTOR ((NS)) |
| ADCMP582BCPZ-R2 | 功能描述:IC COMPARATOR PECL UFAST 16LFCSP RoHS:是 類別:集成電路 (IC) >> 線性 - 比較器 系列:- 標準包裝:1 系列:- 類型:通用 元件數:1 輸出類型:CMOS，開路集電極，TTL 電壓 - 電源，單路/雙路(±):2.7 V ~ 5.5 V 電壓 - 輸入偏移（最小值）:7mV @ 5V 電流 - 輸入偏壓（最小值）:0.25µA @ 5V 電流 - 輸出（標準）:84mA @ 5V 電流 - 靜態（最大值）:120µA CMRR, PSRR（標準）:- 傳輸延遲（最大）:600ns 磁滯:- 工作溫度:-40°C ~ 85°C 封裝/外殼:SC-74A，SOT-753 安裝類型:表面貼裝 包裝:剪切帶 (CT) 產品目錄頁面:1268 (CN2011-ZH PDF) 其它名稱:*LMV331M5*LMV331M5/NOPBLMV331M5CT |
發布緊急采購，3分鐘左右您將得到回復。