- 您現在的位置：買賣IC網 > PDF目錄373993 > ADG936BCP-500RL7 (ANALOG DEVICES INC) Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT PDF資料下載
參數資料
| 型號： | ADG936BCP-500RL7 |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 運動控制電子 |
| 英文描述： | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| 中文描述： | DUAL 1-CHANNEL, SGL POLE DOUBLE THROW SWITCH, QCC20 |
| 封裝： | 4 X 4 MM, MO-220VGGD-1, LFCSP-20 |
| 文件頁數： | 6/16頁 |
| 文件大小： | 395K |
| 代理商： | ADG936BCP-500RL7 |
ADG936/ADG936-R
TERMINOLOGY
Table 5.
Parameter
V
DD
I
DD
GND
INx
V
INL
V
INH
I
INL
(I
INH
)
C
IN
t
ON
t
OFF
t
RISE
t
FALL
Off Isolation
Insertion Loss
Crosstalk
P
–1 dB
Rev. 0 | Page 6 of 16
Description
Most Positive Power Supply Potential.
Positive Supply Current.
Ground (0 V) Reference.
Logic Control Input.
Maximum Input Voltage for Logic 0.
Minimum Input Voltage for Logic 1.
Input Current of the Digital Input.
Digital Input Capacitance.
Delay between Applying the Digital Control Input and the Output Switching On.
Delay between Applying the Digital Control Input and the Output Switching Off.
Rise Time. Time for the RF signal to rise from 10% of the On level to 90% of the On level.
Fall Time. Time for the RF signal to fall from 90% of the On level to 10% of the On level.
The Attenuation between Input and Output Ports of the Switch when the Switch Control Voltage Is in the Off Condition.
The Attenuation between Input and Output Ports of the Switch when the Switch Control Voltage Is in the On Condition.
Measure of Unwanted Signal Coupled through from One Channel to Another as a Result of Parasitic Capacitance.
1 dB Compression Point. The RF input power level at which the switch insertion loss increases by 1 dB over its low level
value. P
–1 dB
is a measure of how much power the On switch can handle before the insertion loss increases by 1 dB.
Third-Order Intermodulation Intercept. This is a measure of the power in false tones that occurs when closely spaced
tones are passed through a switch, whereby the nonlinearity of the switch causes these false tones to be generated.
The Amount of Reflected Power Relative to the Incident Power at a Port. Large return loss indicates good matching. By
measuring return loss, the VSWR can be calculated from conversion charts. VSWR (voltage standing wave ratio) indicates
the degree of matching present at a switch RF port.
Spurious Signals Present at the RF Ports of the Switch when the Control Voltage Is Switched from High to Low or Low to
High without an RF Signal Present.
IP
3
Return Loss
Video
Feedthrough
相關PDF資料 |
PDF描述 |
|---|---|
| ADG936BCP-R | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| ADG936BCP-REEL | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| ADG936BCP-REEL7 | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| ADG936BRU | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| ADG936BRU-R-REEL7 | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADG936BCP-R | 制造商:Analog Devices 功能描述:RF Switch SPDT 0MHz to 2GHz 31dB 20-Pin LFCSP EP |
| ADG936BCP-R-500RL7 | 制造商:Analog Devices 功能描述:RF Switch SPDT 0MHz to 2GHz 31dB 20-Pin LFCSP EP T/R |
| ADG936BCP-REEL | 制造商:Analog Devices 功能描述:RF Switch SPDT 0MHz to 2GHz 31dB 20-Pin LFCSP EP T/R |
| ADG936BCP-REEL7 | 制造商:Analog Devices 功能描述:RF Switch SPDT 0MHz to 2GHz 31dB 20-Pin LFCSP EP T/R |
| ADG936BCP-R-REEL | 制造商:Analog Devices 功能描述:RF Switch SPDT 0MHz to 2GHz 31dB 20-Pin LFCSP EP T/R |
發布緊急采購，3分鐘左右您將得到回復。