- 您現在的位置：買賣IC網 > PDF目錄373993 > ADG936BCP-REEL (ANALOG DEVICES INC) Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT PDF資料下載
參數資料
| 型號： | ADG936BCP-REEL |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 運動控制電子 |
| 英文描述： | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| 中文描述： | DUAL 1-CHANNEL, SGL POLE DOUBLE THROW SWITCH, QCC20 |
| 封裝： | 4 X 4 MM, MO-220VGGD-1, LFCSP-20 |
| 文件頁數： | 12/16頁 |
| 文件大小： | 395K |
| 代理商： | ADG936BCP-REEL |
ADG936/ADG936-R
EVALUATION BOARD
The ADG936 and ADG936-R evaluation board allows
designers to evaluate these high performance wideband
switches with minimal effort.
Rev. 0 | Page 12 of 16
To prove that these devices meet the user’s requirements, only a
power supply and a network analyzer, along with the evaluation
board, are required. An application note available with the
evaluation board gives complete information on operating the
evaluation board.
The RFCA port is connected through a 50 transmission line
to SMA connector J3. The RFCB port is connected through a
50 transmission line to SMA connector J4. RF1A, RF2A,
RF1B, and RF2B are connected through 50 transmission lines
to SMA connectors J5, J6, J7, and J8, respectively. A through
transmission line connects J9 and J10; this transmission line is
used to estimate the loss of the PCB over the environmental
conditions being evaluated.
The board is constructed of a four-layer, FR4 material with a
dielectric constant of 4.3 and an overall thickness of 0.062 in.
Two ground layers with grounded planes provide ground for
the RF transmission lines. The transmission lines were designed
using a coplanar waveguide with ground plane model using a
trace width of 0.024 in, clearance to ground plane of 0.008 in,
dielectric thickness of 0.02 in, and a metal thickness of
0.0021 in.
Figure 29. ADG936 and ADG936-R Evaluation Board Top View
相關PDF資料 |
PDF描述 |
|---|---|
| ADG936BCP-REEL7 | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| ADG936BRU | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| ADG936BRU-R-REEL7 | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| ADG936BRU-REEL | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
| ADG936BRU-REEL7 | Wideband 4 GHz, 36 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, Dual SPDT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADG936BCP-REEL7 | 制造商:Analog Devices 功能描述:RF Switch SPDT 0MHz to 2GHz 31dB 20-Pin LFCSP EP T/R |
| ADG936BCP-R-REEL | 制造商:Analog Devices 功能描述:RF Switch SPDT 0MHz to 2GHz 31dB 20-Pin LFCSP EP T/R |
| ADG936BCP-R-REEL7 | 制造商:Analog Devices 功能描述:RF Switch SPDT 0MHz to 2GHz 31dB 20-Pin LFCSP EP T/R |
| ADG936BCPZ | 功能描述:IC SW DUAL SPDT ABSORPT 20LFCSP RoHS:是 類別:RF/IF 和 RFID >> RF 開關 系列:- 標準包裝:25,000 系列:* RF 型:通用 頻率:0Hz ~ 3GHz 特點:SPDT 封裝/外殼:6-XFDFN 裸露焊盤 供應商設備封裝:TSLP-7 包裝:帶卷 (TR) 其它名稱:SP000671392 |
| ADG936BCPZ-R | 功能描述:IC SW DUAL SPDT REFLECT 20LFCSP RoHS:是 類別:RF/IF 和 RFID >> RF 開關 系列:- 標準包裝:25,000 系列:* RF 型:通用 頻率:0Hz ~ 3GHz 特點:SPDT 封裝/外殼:6-XFDFN 裸露焊盤 供應商設備封裝:TSLP-7 包裝:帶卷 (TR) 其它名稱:SP000671392 |
發布緊急采購，3分鐘左右您將得到回復。