- 您現在的位置：買賣IC網 > PDF目錄373993 > ADL5375 (Analog Devices, Inc.) 400 MHz to 6 GHz Broadband Quadrature Modulator PDF資料下載
參數資料
| 型號： | ADL5375 |
| 廠商： | Analog Devices, Inc. |
| 英文描述： | 400 MHz to 6 GHz Broadband Quadrature Modulator |
| 中文描述： | 400 MHz至6 GHz的寬帶正交調制器 |
| 文件頁數： | 23/32頁 |
| 文件大小： | 1074K |
| 代理商： | ADL5375 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁當前第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁
ADL5375
APPLICATIONS INFORMATION
DAC MODULATOR INTERFACING
Driving the ADL5375-05 with a TXDAC
The ADL5375-05 is designed to interface with minimal
components to members of the Analog Devices, Inc. TxDAC
families. These dual-channel differential current output DACs
feature an output current swing from 0 mA to 20 mA. The
interface described in this section can be used with any DAC
that has a similar output.
An example of an interface using the
AD9779
TxDAC is shown
in Figure 57. The baseband inputs of the ADL5375-05 require
a dc bias of 500 mV. The average output current on each of the
outputs of the AD9779 is 10 mA. Therefore, a single 50 Ω resis-
tor to ground from each of the DAC outputs results in an average
current of 10 mA flowing through each of the resistors, thus
producing the desired 500 mV dc bias for the inputs to the
ADL5375-05.
Rev. 0 | Page 23 of 32
RBIP
50
RBIN
50
93
92
OUT1_N
OUT1_P
IBBN
IBBP
AD9779
ADL5375-05
RBQN
50
RBQP
50
84
83
OUT2_P
OUT2_N
QBBP
QBBN
0
21
22
9
10
Figure 57. Interface Between the AD9779 and ADL5375-05 with 50 Ω
Resistors to Ground to Establish the 500 mV DC Bias for the ADL5375-05
Baseband Inputs
The AD9779 output currents have a swing that ranges from 0 mA
to 20 mA. With the 50 Ω resistors in place, the ac voltage swing
going into the ADL5375-05 baseband inputs ranges from 0 V to
1 V. A full-scale sine wave out of the AD9779 can be described
as a 1 V p-p single-ended (or 2 V p-p differential) sine wave
with a 500 mV dc bias.
Limiting the AC Swing
There are situations in which it is desirable to reduce the ac
voltage swing for a given DAC output current. This can be
achieved through the addition of another resistor to the interface.
This resistor is placed in the shunt between each side of the
differential pair, as shown in Figure 58. It has the effect of
reducing the ac swing without changing the dc bias already
established by the 50 Ω resistors.
RBIP
50
RBIN
50
93
92
21
22
IBBN
IBBP
AD9779
ADL5375-05
RBQN
50
RBQP
50
84
83
9
10
RSLI
100
RSLQ
100
OUT1_N
OUT1_P
OUT2_P
OUT2_N
QBBP
QBBN
0
Figure 58. AC Voltage Swing Reduction Through the Introduction
of a Shunt Resistor Between Differential Pair
The value of this ac voltage swing limiting resistor is chosen
based on the desired ac voltage swing. Figure 59 shows the
relationship between the swing-limiting resistor and the peak-
to-peak ac swing that it produces when 50 Ω bias-setting
resistors are used.
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
10
100
1000
10000
D
R
L
(
)
0
Figure 59. Relationship Between the AC Swing-Limiting Resistor and the
Peak-to-Peak Voltage Swing with 50 Ω Bias-Setting Resistors
Filtering
It is necessary to place an antialiasing filter between the DAC
and modulator to filter out Nyquist images and broadband
DAC noise. The interface for setting up the biasing and ac
swing discussed in the Limiting the AC Swing section lends
itself well to the introduction of such a filter. The filter can be
inserted between the dc bias setting resistors and the ac swing-
limiting resistor. Doing so establishes the input and output
impedances for the filter.
Figure 60 shows a third-order, Bessel low-pass filter with a 3 dB
frequency of 10 MHz. Matching input and output impedances
make the filter design easier, so the shunt resistor chosen is
100 Ω, producing an ac swing of 1 V p-p differential. The
frequency response of this filter is shown in Figure 61.
相關PDF資料 |
PDF描述 |
|---|---|
| ADL5375-05ACPZ-R71 | 400 MHz to 6 GHz Broadband Quadrature Modulator |
| ADL5375-05-EVALZ1 | 400 MHz to 6 GHz Broadband Quadrature Modulator |
| ADL5375-15ACPZ-R71 | 400 MHz to 6 GHz Broadband Quadrature Modulator |
| ADL5375-15ACPZ-WP1 | 400 MHz to 6 GHz Broadband Quadrature Modulator |
| ADL5375-15-EVALZ1 | 400 MHz to 6 GHz Broadband Quadrature Modulator |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADL5375_13 | 制造商:AD 制造商全稱:Analog Devices 功能描述:400 MHz to 6 GHz Broadband Quadrature Modulator |
| ADL5375-05 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Interfacing the ADL5375 I/Q Modulator to the AD9779A Dual-Channel, 1 GSPS High Speed DAC |
| ADL5375-05ACPZ | 制造商:Analog Devices 功能描述:IC 400MHZ-6GHZ MOD QUAD 24LFCSP 制造商:Analog Devices 功能描述:IC, 400MHZ-6GHZ, MOD, QUAD, 24LFCSP 制造商:Analog Devices 功能描述:IC, 400MHZ-6GHZ, MOD, QUAD, 24LFCSP; Frequency Min:400MHz; Frequency Max:6GHz; RF Type:Quadrature; Supply Voltage Min:4.75V; Supply Voltage Max:5.25V; RF IC Case Style:LFCSP; No. of Pins:24; Operating Temperature Min:-40C; Operating;RoHS Compliant: Yes 制造商:Analog Devices 功能描述:Quadrature Mod 24-Pin LFCSP EP T/R |
| ADL5375-05ACPZ-R2 | 制造商:Analog Devices 功能描述:400 MHZ TO 6 GHZ BROADBAND QUADRATURE MODULATOR - Tape and Reel |
| ADL5375-05ACPZ-R7 | 功能描述:IC MOD QUAD 400MHZ-6GHZ 24LFCSP RoHS:是 類別:RF/IF 和 RFID >> RF 調制器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 功能:調制器 LO 頻率:700MHz ~ 2.3GHz RF 頻率:700MHz ~ 2.3GHz P1dB:1dBm 底噪:-148dBm/Hz 輸出功率:-1dBm 電流 - 電源:46mA 電源電壓:2.7 V ~ 3.6 V 測試頻率:1.75GHz 封裝/外殼:28-WFQFN 裸露焊盤 包裝:帶卷 (TR) |
發布緊急采購，3分鐘左右您將得到回復。